Applied sciences

Archives of Civil Engineering

Content

Archives of Civil Engineering | 2019 | Vol. 65 | No 3

Download PDF Download RIS Download Bibtex

Abstract

In this Paper, a parametric study on pipes buried in soil was performed illustrating the results of blast loading. Effects of various parameters such as the physical properties of water, oil, gas, air, soil, pipes, and TNT have been investigated. The arbitrary Lagrangian-Eulerian (ALE) method was employed using LS-DYNA software. The maximum pressure in a buried pipe explosive was observed at an angle of about 0° to 45° and the minimum pressure occurred at an angle of about 45° to 90°. Therefore, all figures in this study illustrate that fluid pressure levels in buried pipes can help in their stabilization. In generally, by increasing the 1.23 times of liquid density under the explosion, the pressure levels in the soil decreased by 1.3 percent. The gas pressure has been increasing more than oil and water pipes 39.73 and 40.52 percent, respectively.

Go to article

Authors and Affiliations

M. Parvizi
B. Aminnejad
A.R. Fiouz
Download PDF Download RIS Download Bibtex

Abstract

The paper deals with the variability of mechanical properties of EPSTAL steel rods produced in Polish steelworks, i.e. yield stress Re, tensile strength Rm, and elongation Agt. Our study is based on fundamental engineering static room-temperature tensile tests for large series specimens which have been made by manufacturers as the part of a factory quality control. Statistical analysis of these results shows that the stressstrain relationship of steel tensile tests should be described by a one-dimensional stochastic process, and three the most important mechanical parameters, i.e. the yield stress, tensile strength, and elongation by random variables. Based on the statistical elaboration of experimental data, it was found that the yield stress and tensile strength of steel rods produced in the years 2016-2017 had the coefficients of variation of less than 3%, and there is a reasonable basis for the manufacturer to increase the characteristic value of EPSTAL steel rods yield stress by a few percentages.

Go to article

Authors and Affiliations

T. Chmielewski
M. Piotrowska
Download PDF Download RIS Download Bibtex

Abstract

The paper presents the dependence of ITS results at the elevated temperature (40°C) on rutting parameters, i.e. proportional rut depth (PRDAIR) and wheel tracking speed (WTSAIR), obtained at the temperature of 60°C. The asphalt mixture samples were prepared in the gyratory compactor, but ITS tests were conducted with typical Marshall press, at a loading rate of 50 mm/min. Correlation analyses show a strong relationships between ITS results and rutting parameters, whereby the correlation coefficients obtained are higher for the PRDAIR parameter (r = -0.88) than WTSAIR (r = -0.81). Using the obtained regression functions, the prediction limits as well as confidence limits were calculated, which allowed to develop criteria for assessing resistance to rutting on the basis of ITS test, and taking into account the technical requirements in Poland.

Go to article

Authors and Affiliations

P. Zieliński
Download PDF Download RIS Download Bibtex

Abstract

Almost every construction investment should contain elements of risk forecasting, whose validity depends, among other things, on the correct assessment of potential threats. These risks were defined by the Authors as risk factors that were characterized and then grouped on the basis of performed research in the scope of their identification. Due to lack of method of scheduling railway investments on the construction market, including risk assessment, a research effort was undertaken [14-17], the result of which is the proposed method. The article presents the main assumptions of the original method of rail investment planning, which on the one hand, will take into account the impact of potential threats identified previously by the Authors, and, on the other, will allow project managers to refer to the conditions in which the implementation of a specific facility is planned. The assumption was made that the method, relatively easy to implement, supported by an appropriate computational program, will encourage teams planning the implementation of railway undertakings to its application and will improve the reliability of the schedules they develop.

Go to article

Authors and Affiliations

J. Kowalski
M. Poloński
Download PDF Download RIS Download Bibtex

Abstract

The collapse of the Soviet Union was the cause of a significant decline in many economies of the newly created countries. However, many of them, including the Ukrainian economy, are slowly recovering. One of the largest branches of the economy in this country is construction, which, despite political turmoil, is constantly growing, especially in the private real estate development sector. Despite the fact that the construction market is constantly developing, it is limited by the costs of rework and alterations resulting from many reasons. The key negative effects of modifications to the results of the project are exceeding the budget and time of project implementation, dissatisfaction with the project team, violation of contractual requirements and lowering the quality of the final product. Therefore, the purpose of this article was to determine the reasons for the emergence of rework in the in Ukraine by analyzing the results of surveys conducted among construction enterprises.

Go to article

Authors and Affiliations

B. Trach
K. Pawluk
M. Lendo-Siwicka
Download PDF Download RIS Download Bibtex

Abstract

The article is an attempt to compare the impact of the use of various types of limestone as the main constituent of cement on selected mortar properties. Four different limestones were added in amount of 15, 30, 40% to CEM I 42.5 R to obtain limestone cemens. Rheological properties (yield stress, plastic viscosity) of fresh mortar, tensile and compressive mortar strength, early shrinkage, and drying shrinkage were tested. Obtained results indicate that both tensile and compressive strength decreases with the increase of the limestone content in cement. Limestone can worsen or improve workability, depending on distribution of limestone grains. The addition of limestone increases the early shrinkage, but reduces the shrinkage after 28 days. Studies show that the granulation of limestone plays an important role in determining the influence of limestone on mortar properties.

Go to article

Authors and Affiliations

J. Gołaszewski
G. Cygan
M. Gołaszewska
Download PDF Download RIS Download Bibtex

Abstract

Construction planning always requires labour productivity estimation. Often, in the case of monolithic construction works, the available catalogues of productivity rates do not provide a reliable assessment. The paper deals with the problem of labour estimation for reinforcement works. An appropriate model of labour prediction problem is being introduced. It includes, between others, staff experience and reinforcement buildability. In the paper it is proposed, that labour requirements can be estimated with aggregated classifiers. The work is a continuation of earlier studies, in which the possibility of using classifier ensembles to predict productivity in monolithic works was investigated.

Go to article

Authors and Affiliations

A. Krawczyńska-Piechna
Download PDF Download RIS Download Bibtex

Abstract

The paper evaluates the relationship between the selection of the probability density function and the construction price, and the price of the building's life cycle, in relation to the deterministic cost estimate in terms of the minimum, mean, and maximum. The deterministic cost estimates were made based on the minimum, mean, and maximum prices: labor rates, indirect costs, profit, and the cost of equipment and materials. The net construction prices received were given different probability density distributions based on the minimum, mean, and maximum values. Twelve kinds of probability distributions were used: triangular, normal, lognormal, beta pert, gamma, beta, exponential, Laplace, Cauchy, Gumbel, Rayleigh, and uniform. The results of calculations with the event probability from 5 to 95% were subjected to the statistical comparative analysis. The dependencies between the results of calculations were determined, for which different probability density distributions of price factors were assumed. A certain price level was assigned to specific distributions in 6 groups based on the t-test. It was shown that each of the distributions analyzed is suitable for use, however, it has consequences in the form of a final result. The lowest final price is obtained using the gamma distribution, the highest is obtained by the beta distribution, beta pert, normal, and uniform.

Go to article

Authors and Affiliations

M. Rogalska
J. Żelazna-Pawlicka
Download PDF Download RIS Download Bibtex

Abstract

Construction work on buildings covered by the revitalization program of historic urban development represents a special type of construction project in which, in the execution phase, difficult technical situations and other risk sources are being encountered. An important source of risk is the necessity to preserve a part of the historic substance, which results, among others, from the recommendations of the conservator, legal regulations or from the vision of the architect/investor. The risk is also associated with difficulties and complications in construction works resulting from the location of these objects in dense urban development. The aim of the article is to identify risk factors and reactions of contractors, i.e. applied risk management methods and techniques, based on the example of a complex of buildings constructed in the historic district of Krakow. The elimination of sources of risk, especially of a technical nature, requires the construction management to be highly skilled and experienced, to carefully prepare the construction work and to design additional solutions to ensure safety at work. The experience gained may serve as a basis for risk analysis and identification during the implementation of projects involving the use of an existing building and historic substance in areas subject to revitalization programs.

Go to article

Authors and Affiliations

A. Sobotka
A. Radziejowska
Download PDF Download RIS Download Bibtex

Abstract

Admixtures are commonly used nowadays in the mix composition of concrete. These additions affect concrete properties and performance especially creep deformations. This paper shows the effect of admixtures on creep of concrete. In fact, creep deformations have prejudicial consequences on concrete behaviour; an incorrect or inaccurate prediction leads to undesirable consequences in structures. Therefore, an accurate estimation of these deformations is mandatory. Moreover, design codes do not consider admixtures’ effect while predicting creep deformations, thus it is necessary to develop models that predict accurately creep deformations and consider the effect of admixtures. Using a large experimental database coming from international laboratories and research centres, this study aims to update the Eurocode 2 creep model by considering the type and percentage of admixtures using Bayesian Linear Regression method. The effect of two types of admixtures is presented in this paper; the water reducer and silica fume.

Go to article

Authors and Affiliations

E. Zgheib
W. Raphael
Download PDF Download RIS Download Bibtex

Abstract

The compressive strength and water absorption of cement mortars with different water-binder ratio (0.35, 0.45 and 0.55) and fly ash content (0, 10%, 20% and 30%) under water immersion were investigated, and the correlation between them was further analyzed. The internal microstructure and phase composition of mortar was studied by scanning electron microscopy (SEM) and X-ray diffraction (XRD), respectively. The results show that the inside of mortar mixed with fly ash displayed the loose and porous microstructure. Therefore, the incorporation of fly ash reduced the compressive strength of mortar, especially the early strength, and the strength decreased with the increase of fly ash content, and the water absorption of mortar also increased. There was a linear correlation between the compressive strength and water absorption of mortar with the equation: fc = -3.838β + 62.332, where fc and β represented the compressive strength and water absorption, respectively. Therefore, when the water absorption of mortar immersed in water was measured, its corresponding compressive strength could be preliminarily inferred through this equation, which was of great significance for detecting and identifying the stability and safety of hydraulic structures.

Go to article

Authors and Affiliations

Qian Huang
Liang Zhao
Download PDF Download RIS Download Bibtex

Abstract

The approach to numerical analyses was changed by the introduction of Eurocodes . The EN 1993-1-6 standard allows taking into account imperfections on the shape of a buckling form from a linear elastic bifurcation analysis. The article analyses the first ten forms of imperfection from a linear elastic bifurcation analysis on the reduction of the capacity of a cylindrical shell. Calculations were made using finite element methods.

Go to article

Authors and Affiliations

K. Schabowicz
Ł. Zawiślak
Download PDF Download RIS Download Bibtex

Abstract

To study the difference in seismic vulnerability of multiple typical structures in multiple intensity zones, the seismic damage of 7099 buildings of Dujiangyan masonry structure (MS), reinforced concrete structure (RC) and bottom frame seismic wall masonry (BFM) in the 2008 Wenchuan earthquake in China is summarized and analysed. First, a statistical analysis of the data is carried out, the empirical seismic vulnerability matrix and model curves are established by considering the number of storeys, the age and the fortification factors.The vulnerability curves of the cumulative exceeding probability of the empirical seismic damage and the grade of the seismic damage in multiple intensity zones are shown. The mean damage index vulnerability matrix model is proposed and verified using the empirical seismic damage matrix of typical structures.

Go to article

Authors and Affiliations

S.Q. Li
T.L. Yu
Y.S. Chen

Publication Ethics Policy

ETHICS POLICY

”Archives of Civil Engineering” respects and promotes the principles of publishing ethics. Being guided by COPE’s Guidelines ( https://publicationethics.org/resources/guidelines) we ensure that all participants of the publishing process comply with these rules, the journal pays special attention to:

Editor Responsibilities
1. Qualifying individual manuscripts for publication only on the basis of: (a) compliance with the guidelines provided to the authors, (b) substantive value, (c) originality, (d) transparency of presentation
2. Deciding whether the paper fulfills all requirements i.e. formal and scientific and which articles submitted to the journal should be published. In making these decisions, the editor may be guided by the policies of the journal’s editorial board as well as by legal requirements regarding libel, copyright infringement, and plagiarism.
3. Evaluating manuscripts for intellectual content without regard to race, gender, sexual orientation, religious belief, ethnic origin, citizenship, or political philosophy of the author(s).
4. Ensuring scientific accuracy and complying with the principle of authorship; making sure that individual authors who contribute to the publication accept its form after the scientific editing
5. Providing a fair and appropriate peer review process.
6. Withdrawing manuscripts from publication, if any information about its unreliability appeared, also as a result of unintentional errors, features of plagiarism or violation of the rules of publishing ethics were identified.
7. Requiring all contributors to disclose relevant competing interests and publish corrections if competing interests are revealed after publication. If needed, other appropriate action should be taken, such as the publication of a retraction or expression of concern.
8. Maintaining the integrity of the academic record, precludes business needs from compromising intellectual and ethical standards, and is always willing to publish corrections, clarifications, retractions, and apologies when needed.
9. Not disclosing any information about a manuscript under consideration to anyone other than the author(s), reviewers and potential reviewers, and in some instances the editorial board members, as appropriate.

Reviewer Responsibilities
1. Cooperating with the scientific editor and / or editorial office and the authors in the field of improving the reviewed material;
2. Being objective and expressing the views clearly with appropriate supporting arguments.
3. Assessing of the entrusted works in a careful and objective manner, if possible with an assessment of their scientific reliability and with appropriate justification of the comments submitted;
4. identifying relevant published work that has not been cited by the authors
5. calling to the editor's attention any substantial similarity or overlap between the manuscript under consideration and any other published data of which they have personal knowledge
6. Maintaining the principle of fair play, excluding personal criticism of the author (s)
7. Maintaining confidentiality, which is not showing or discussing with others except those authorized by the editor. Any manuscripts received for review are treated as confidential documents.
8. Performing a review within the set time limit or accepting another solution jointly with ACE in the event of failure to meet this deadline.
9. Notifying the editor if the invited reviewer feels unqualified to review the manuscript or knows that its timely review will be impossible.
10. identifying relevant published work that has not been cited by the authors
11. Not considering evaluating manuscripts in which they have conflicts of interest resulting from competitive, collaborative, or other relationships or connections with any of the authors, companies, or institutions connected to the submission.

Author Responsibilities
1. Results of original research should present an accurate account of the work performed as well as an objective discussion of its significance. Underlying data should be represented accurately in the manuscript. A paper should contain sufficient detail and references to permit others to replicate the work. Fraudulent or knowingly inaccurate statements constitute unethical behaviour and are unacceptable.
2. The authors should follow the principle of originality, which is submitting only their own original works, and in the case of using the works of other authors, marking them in accordance with the rules of quotation, or obtaining consent for the publication of previously published materials from their owners or administrators;
3. An author should not in general publish manuscripts describing essentially the same research in more than one journal or primary publication. Parallel submission of the same manuscript to more than one journal constitutes unethical publishing behaviour and is unacceptable.
4. Authorship should be limited to those who have made a significant contribution to the conception, design, execution, or interpretation of the reported study and phenomena such as ghostwriting or guest authorship in the event of their detection must be actively counteracted.
5. All authors should report in a Reliable manner the sources they used to create their own study and their inclusion in the attachment bibliography;
6. All those who have made significant contributions should be listed as co-authors. Where there are others who have participated in certain substantive aspects of the research project, they should be named in an Acknowledgement section.
7. The corresponding author should ensure that all appropriate co-authors (according to the above definition) and no inappropriate co-authors are included in the author list of the manuscript, and that all co-authors have seen and approved the final version of the paper and have agreed to its submission for publication.
8. All authors should disclose in their manuscript any financial or other substantive conflict of interest that might be construed to influence the results or their interpretation in the manuscript. All sources of financial support for the project should be disclosed.
9. When an author discovers a significant error or inaccuracy in his/her own published work, it is the author’s obligation to promptly notify the journal’s editor or publisher and cooperate with them to either retract the paper or to publish an appropriate erratum.

Publisher’s Confirmation
In cases of alleged or proven scientific misconduct, fraudulent publication or plagiarism the publisher, in close collaboration with the editors, will take all appropriate measures to clarify the situation and to amend the article in question. This includes the prompt publication of an erratum or, in the most severe cases, the complete retraction of the affected work.

Peer-review Procedure

Manuscript Peer-Review Procedure

”Archives of Civil Engineering” makes sure to provide transparent policies for peer-review, and reviewers have an obligation to conduct reviews in an ethical and accountable manner. There is clear communication between the journal and the reviewers which facilitates consistent, fair, and timely review.

-The model of peer-review is double-blind: the reviewers do not know the names of the authors, and the authors do not know who reviewed their manuscript (but if the research is published reviewers can eventually know the names of the authors). A complete list of reviewers is published in a traditional version of the journal: in-print.
-It is the editor who appoints two reviewers; however, if there are discrepancies in the assessment the third reviewer can be appointed.
-After having accepted to review the manuscript (one-week deadline), the reviewers have approximately 6 weeks to finish the process.
-The paper is published in ACE provided that the reviews are positive. All manuscripts receive grades from 1-5, 5 being positive, 1 negative, the authors receive reviews to read and consider the comments.
-Manuscript evaluations are assigned one of five outcomes: accept without changes, accept after changes suggested by the reviewer, rate manuscript once again after major changes and another review, reject, withdraw.
-Manuscripts requiring minor revision (accept after changes suggested by the reviewer) does not require a second review. All manuscripts receiving a "Rate manuscript once again after major changes and another review " evaluation must be subjected to a second review. Rejected manuscripts are given no further consideration. There are cases when the article can be withdrawn, often upon the request of an author, technical reason (e.g. names of authors are placed in the text, lack of references, or inappropriate structure of the text), or plagiarism.
-The revised version of the manuscript should be uploaded to the Editorial System within six weeks. If the author(s) failed to make satisfactory changes, the manuscript is rejected.
-On acceptance, manuscripts are subject to editorial amendment to suit house style.
-Paper publication requires the author's final approval.
- As soon as the publication appears in print and in electronic forms on the Internet there is no possibility to change the content of the article.

Editor’s responsibilities
-The editor decides whether the paper fulfills all requirements i.e. formal and scientific and which articles submitted to the journal should be published.
-In making these decisions, the editor may be guided by the policies of the journal’s editorial board as well as by legal requirements regarding libel, copyright infringement, and plagiarism.
-The editor maintains the integrity of the academic record, precludes business needs from compromising intellectual and ethical standards, and is always willing to publish corrections, clarifications, retractions, and apologies when needed.
-The editor evaluates manuscripts for intellectual content without regard to race, gender, sexual orientation, religious belief, ethnic origin, citizenship, or political philosophy of the author(s).
-The editor does not disclose any information about a manuscript under consideration to anyone other than the author(s), reviewers and potential reviewers, and in some instances the editorial board members, as appropriate.

Reviewers' responsibilities
Any manuscripts received for review are treated as confidential documents. They must not be shown to or discussed with others except if authorized by the editor. Privileged information or ideas obtained through peer review is kept confidential and not used for personal advantage Any invited reviewer who feels unqualified to review the manuscript or knows that its timely review will be impossible should immediately notify the editor so that alternative reviewers can be contacted. Reviewers should identify relevant published work that has not been cited by the authors. Any statement that an observation, derivation, or argument had been previously reported should be accompanied by the relevant citation. A reviewer should also call to the editor's attention any substantial similarity or overlap between the manuscript under consideration and any other published data of which they have personal knowledge. Reviewers should not consider evaluating manuscripts in which they have conflicts of interest resulting from competitive, collaborative, or other relationships or connections with any of the authors, companies, or institutions connected to the submission. Reviews should be conducted objectively. Personal criticism of the author is unacceptable. Referees should express their views clearly with appropriate supporting arguments. All reviews must be carried out on a special form available in the Editorial System.

This page uses 'cookies'. Learn more