Applied sciences

Archives of Control Sciences

Content

Archives of Control Sciences | 2018 | vol. 28 | No 2

Download PDF Download RIS Download Bibtex

Abstract

This article presents a hybrid control system for a group of mobile robots. The components of this system are the supervisory controller(s), employing a discrete, event-driven model of concurrent robot processes, and robot motion controllers, employing a continuous time model with event-switched modes. The missions of the robots are specified by a sequence of to-be visited points, and the developed methodology ensures in a formal way their correct accomplishment.
Go to article

Authors and Affiliations

Elżbieta Roszkowska
Download PDF Download RIS Download Bibtex

Abstract

In this article, an engineering/physical dynamic system including losses is analyzed inrelation to the stability from an engineer’s/physicist’s point of view. Firstly, conditions for a Hamiltonian to be an energy function, time independent or not, is explained herein. To analyze stability of engineering system, Lyapunov-like energy function, called residual energy function is used. The residual function may contain, apart from external energies, negative losses as well. This function includes the sum of potential and kinetic energies, which are special forms and ready-made (weak) Lyapunov functions, and loss of energies (positive and/or negative) of a system described in different forms using tensorial variables. As the Lypunov function, residual energy function is defined as Hamiltonian energy function plus loss of energies and then associated weak and strong stability are proved through the first time-derivative of residual energy function. It is demonstrated how the stability analysis can be performed using the residual energy functions in different formulations and in generalized motion space when available. This novel approach is applied to RLC circuit, AC equivalent circuit of Gunn diode oscillator for autonomous, and a coupled (electromechanical) example for nonautonomous case. In the nonautonomous case, the stability criteria can not be proven for one type of formulation, however, it can be proven in the other type formulation.
Go to article

Authors and Affiliations

Cim Civelek
Download PDF Download RIS Download Bibtex

Abstract

The designing of transmultiplexer systems relies on determining filters for the transmitter and receiver sides of multicarrier communication system. The perfect reconstruction conditions lead to the bilinear equations for FIR filter coefficients. Generally there is no way of finding all possible solutions. This paper describes methods of finding a large family of solutions. Particular attention is devoted to obtaining algorithms useful in fixed-point arithmetic needed to design the integer filters. As a result, the systems perform perfect reconstruction of signals. Additionally, a simple method is presented to transform any transmultiplexer into an unlimited number of different transmultiplexers. Finally, two examples of integer filters that meet perfect reconstruction conditions are shown. The first illustrates a FIR filter which does not require multiplications. The frequency properties of filters and signals are discussed for the second example.
Go to article

Authors and Affiliations

Mariusz Ziółko
Michał Nowak
Download PDF Download RIS Download Bibtex

Abstract

A novel 4-D chaotic hyperjerk system with four quadratic nonlinearities is presented in this work. It is interesting that the hyperjerk system has no equilibrium. A chaotic attractor is said to be a hidden attractor when its basin of attraction has no intersection with small neighborhoods of equilibrium points of the system. Thus, our new non-equilibrium hyperjerk system possesses a hidden attractor. Chaos in the system has been observed in phase portraits and verified by positive Lyapunov exponents. Adaptive backstepping controller is designed for the global chaos control of the non-equilibrium hyperjerk system with a hidden attractor. An electronic circuit for realizing the non-equilibrium hyperjerk system is also introduced, which validates the theoretical chaotic model of the hyperjerk system with a hidden chaotic attractor.
Go to article

Authors and Affiliations

Sundarapandian Vaidyanathan
Sajad Jafar
Viet-Thanh Pham
Ahmad Taher Azar
Fawaz E. Alsaadi
Download PDF Download RIS Download Bibtex

Abstract

The minimum energy control problem for the positive descriptor discrete-time linear systems with bounded inputs by the use of Weierstrass-Kronecker decomposition is formulated and solved. Necessary and sufficient conditions for the positivity and reachability of descriptor discrete-time linear systems are given. Conditions for the existence of solution and procedure for computation of optimal input and the minimal value of the performance index is proposed and illustrated by a numerical example.
Go to article

Authors and Affiliations

Tadeusz Kaczorek
Download PDF Download RIS Download Bibtex

Abstract

The motion planning problem consists in finding a control function which drives the system to a desired point. The motion planning algorithm derived with an endogenous configuration space approach assumes that the motion takes place in an arbitrary chosen time horizon. This work introduces a modification to the motion planning algorithm which allows to reach the destination point in time, which is shorter than the assumed time horizon. The algorithm derivation relies on the endogenous configuration space approach and the continuation (homotopy) method. To achieve the earlier destination reaching a new formulation of the task map and the task Jacobian are introduced. The efficiency of the new algorithm is depicted with simulation results.
Go to article

Authors and Affiliations

Adam Ratajczak
Download PDF Download RIS Download Bibtex

Abstract

The paper presents a simple, systematic and novel graphical method which uses computer graphics for prediction of limit cycles in two dimensional multivariable nonlinear system having rectangular hysteresis and backlash type nonlinearities. It also explores the avoidance of such self-sustained oscillations by determining the stability boundary of the system. The stability boundary is obtained using simple Routh Hurwitz criterion and the incremental input describing function, developed from harmonic balance concept. This may be useful in interconnected power system which utilizes governor control. If the avoidance of limit cycle or a safer operating zone is not possible, the quenching of such oscillations may be done by using the signal stabilization technique which is also described. The synchronization boundary is laid down in the forcing signal amplitudes plane using digital simulation. Results of digital simulations illustrate accuracy of the method for 2×2 systems.
Go to article

Authors and Affiliations

K.C. Patra
B.K. Dakua

Instructions for authors

Each paper submitted is subject to a review procedure, and the publication decision is based on reviers' comments on the paper. To avoid delay, please prepare the manuscript carefully following the suggestions listed below.

Computer file of the manuscript may be sent by e-mail to the address of Assistant Editor or acs@polsl.pl. Preferred text processors is TeX or LaTeX, however Word and other processors are also acceptable. In case of difficulties in processing the text, the author may be asked to supply the ASCII export of the original file.

Manuscripts sent via ordinary post should be typewritten double-spaced on one side of a standard size (A4) paper. Left side margin should be approximately 3cm (1.2'') wide. Each page should contain approximately 30 lines of 60 characters each. The manuscript including figures and tables together with their captions should be submitted. A separate signed letter giving the Author's preferred address for correspondence and return of proofs should be enclosed. Manuscript is the basis for editorial work.

First page should include the title of the paper, first name(s) and surname(s) of the Author(s), and a short summary (abstract), not longer than 20 lines.

Keywords of max. 5 - 7 items should be included in manuscript.

Numeration. All chapters, including the introduction, should be numbered in arabic numerals. Equations, tables and figures as well as theorems, corollaries, examples etc., should be numbered consecutively throughout the paper in arabic numerals, except in appendices. Appendices should be numbered with capital letters, and numeration should be closed within individual appendices.

If the manuscript is not prepared with TeX, mathematical expressions should be carefully written so as not to arouse confusion. Care should be taken that subscripts and superscripts are easily readable.

Tables and figures should be placed as desired by the Author within the text or on separate sheets with their suggested location indicated by the number of table or figure in the text. Figures, graphs and pictures (referred to as Fig. in the manuscript) should be numbered at the beginning of their caption following the figure. All figures should be prepared as PostScript EPS files or LaTeX picture files; in special cases, bitmaps of figure are also acceptable. The numbers and titles of tables should be placed above the main body of each table.

References should be listed alphabetically at the end of the manuscript. They should be numbered in ascending order and the numbers should be inserted in square brackets. References should be organized as follows. First initial(s), surname(s) of the author(s) and title of article or book. Then, for papers: title of periodical or collective work, volume number (year of issue), issue number, and numbers of the first and the last page; for books: publisher's name(s), place and year of issue. Example:

  1. R. E. Kalman: Mathematical description of linear dynamical system. SIAM J. Control. 1(2), (1963), 152-192.
  2. F. C. Shweppe: Uncertain dynamic systems. Prentice-Hall, Englewood Cliffs, N.J. 1970.


Please, give full titles of journals; only common words like Journal, Proceedings, Conference, etc. may be abbreviated ( to J., Proc., Conf., ... respectively). References to publications in the body of the manuscript should be indicated by the numbers of the adequate references in square brackets. When the paper is set in TeX the preferable form of preparing references is Bib TeX bib database.

Footnotes should be placed in the manuscript, beginning with "Received..." (date to be filled in by Editor), the author's institutional affiliation and acknowledgement of financial support,

This page uses 'cookies'. Learn more