Nauki Techniczne

Archives of Acoustics

Zawartość

Archives of Acoustics | 2019 | vol. 44 | No 3

Abstrakt

Choral singers are among intensive voice users whose excessive vocal effort puts them at risk of developing voice disorders. The aim of the work was to assess voice quality for choral singers in the choir at the Polish-Japanese Academy of Information Technology. This evaluation was carried out using the acoustic parameters from the COVAREP (A Collaborative Voice Analysis Repository For Speech Technologies) repository. A prototype of a mobile application was also prepared to allow the calculation of these parameters.

The study group comprised 6 male and 19 female choir singers. The control group consisted of healthy non-singing individuals, 50 men and 39 women. Auditory perceptual assessment (using the RBH scale) as well as acoustic analysis were used to test the voice quality of all the participants. The voice quality of the female choir singers proved to be normal in comparison with the control group.

The male choir singers were found to have tense voice in comparison with the controls. The parameters which proved most effective for voice evaluation were Peak Slope and Normalized Amplitude Quotient.

Przejdź do artykułu

Autorzy i Afiliacje

Krzysztof Szklanny

Abstrakt

The aim of the study was to examine the relationship between tinnitus pitch and maximum hearing loss, frequency range of hearing loss, and the edge frequency of the audiogram, as well as, to analyze tinnitus loudness at tinnitus frequency and normal hearing frequency.

The study included 212 patients, aged between 21 to 75 years (mean age of 54.4 ± 13.5 years) with chronic subjective tinnitus and sensorineural hearing loss. For the statistical data analysis we used Chisquare test and Fisher’s exact test with level of significance p < 0:05.

Tinnitus pitch corresponding to the frequency range of hearing loss, maximum hearing loss and the edge frequency was found in 70.8%, 37.3%, and 16.5% of the patients, respectively. The majority of patients had tinnitus pitch from 3000 to 8000 Hz corresponding to the range of hearing loss (p < 0:001). The mean tinnitus pitch was 3545 Hz ± 2482. The majority (66%) of patients had tinnitus loudness 4–7 dB SL. The mean sensation level at tinnitus frequency was 4.9 dB SL ± 1.9, and 13 dB SL ± 2.9 at normal hearing frequency.

Tinnitus pitch corresponded to the frequency range of hearing loss in majority of patients. There was no relationship between tinnitus pitch and the edge frequency of the audiogram. Loudness matching outside the tinnitus frequency showed higher sensation level than loudness matching at tinnitus frequency.

Przejdź do artykułu

Autorzy i Afiliacje

Lidija Ristovska
Zora Jachova
Vase Stojcheska

Abstrakt

The most challenging in speech enhancement technique is tracking non-stationary noises for long speech segments and low Signal-to-Noise Ratio (SNR). Different speech enhancement techniques have been proposed but, those techniques were inaccurate in tracking highly non-stationary noises. As a result, Empirical Mode Decomposition and Hurst-based (EMDH) approach is proposed to enhance the signals corrupted by non-stationary acoustic noises. Hurst exponent statistics was adopted for identifying and selecting the set of Intrinsic Mode Functions (IMF) that are most affected by the noise components. Moreover, the speech signal was reconstructed by considering the least corrupted IMF. Though it increases SNR, the time and resource consumption were high. Also, it requires a significant improvement under nonstationary noise scenario. Hence, in this article, EMDH approach is enhanced by using Sliding Window (SW) technique. In this SWEMDH approach, the computation of EMD is performed based on the small and sliding window along with the time axis. The sliding window depends on the signal frequency band. The possible discontinuities in IMF between windows are prevented by the total number of modes and the number of sifting iterations that should be set a priori. For each module, the number of sifting iterations is determined by decomposition of many signal windows by standard algorithm and calculating the average number of sifting steps for each module. Based on this approach, the time complexity is reduced significantly with suitable quality of decomposition. Finally, the experimental results show the considerable improvements in speech enhancement under non-stationary noise environments.

Przejdź do artykułu

Autorzy i Afiliacje

Selvaraj Poovarasan
Eswaran Chandra

Abstrakt

The paper presents the key-finding algorithm based on the music signature concept. The proposed music signature is a set of 2-D vectors which can be treated as a compressed form of representation of a musical content in the 2-D space. Each vector represents different pitch class. Its direction is determined by the position of the corresponding major key in the circle of fifths. The length of each vector reflects the multiplicity (i.e. number of occurrences) of the pitch class in a musical piece or its fragment. The paper presents the theoretical background, examples explaining the essence of the idea and the results of the conducted tests which confirm the effectiveness of the proposed algorithm for finding the key based on the analysis of the music signature. The developed method was compared with the key-finding algorithms using Krumhansl-Kessler, Temperley and Albrecht-Shanahan profiles. The experiments were performed on the set of Bach preludes, Bach fugues and Chopin preludes.

Przejdź do artykułu

Autorzy i Afiliacje

Dariusz Kania
Paulina Kania

Abstrakt

The effects of friction were observed in electric guitar strings passing over an electric guitar saddle. The effects of changing the ratio of the diameter of the winding to the diameter of the core of the string, the angle through which the string is bent, and the length on either side of the saddle were measured. Relative tensions were deduced by plucking and measuring the frequencies of vibration of the two portions of string. Coefficients of friction consistent with the capstan equation were calculated and were found to be lower than 0.26 for wound strings (nickel plated steel windings on steel cores) and lower than 0.17 for unwound (tin plated steel) strings. The largest values of friction were associated with strings of narrower windings and wider cores and this may be due to the uneven nature of the contact between the string and saddle for wound strings or due the surface of the windings deforming more, encouraging fresh (and therefore higher friction) metal to metal contact. It is advised to apply lubrication under the saddle to string contact point after first bringing the string up to pitch rather than before in order to prevent this fresh metal to metal contact.

Przejdź do artykułu

Autorzy i Afiliacje

Tom Groves
Jonathan A. Kemp

Abstrakt

The airflow in the mouth of an open and closed flue organ pipe of corresponding geometrical proportions is studied. The phase locked particle image velocimetry with subsequent analysis by the biorthogonal decomposition is employed in order to compare the flow mechanisms and related features. The most significant differences lie in the mean velocity distribution and rapidity of the jet lateral motion. Remarks on the pressure estimation from PIV data and its importance for the aeroacoustic source terms are made and a specific example is discussed.

Przejdź do artykułu

Autorzy i Afiliacje

Viktor Hruška
Pavel Dlask

Abstrakt

An isogeometric boundary element method is applied to simulate wave scattering problems governed by the Helmholtz equation. The NURBS (non-uniform rational B-splines) widely used in the CAD (computer aided design) field is applied to represent the geometric model and approximate physical field variables. The Burton-Miller formulation is used to overcome the fictitious frequency problem when using a single Helmholtz boundary integral equation for exterior boundary-value problems. The singular integrals existing in Burton-Miller formulation are evaluated directly and accurately using Hadamard’s finite part integration. Fast multipole method is applied to accelerate the solution of the system of equations. It is demonstrated that the isogeometric boundary element method based on NURBS performs better than the conventional approach based on Lagrange basis functions in terms of accuracy, and the use of the fast multipole method both retains the accuracy for isogeometric boundary element method and reduces the computational cost.

Przejdź do artykułu

Autorzy i Afiliacje

Leilei Chen
Wenchang Zhao
Cheng Liu
Haibo Chen
Steffen Marburg

Abstrakt

In the paper, the results of investigations on the properties of acoustic emission signals generated in a tested pressure vessel are presented. The investigations were performed by repeating several times the following procedure: an increase in pressure, maintaining a given pressure level, a further increase in pressure, and then maintaining the pressure at new determined level. During the tests the acoustic emission signals were recorded by the measuring system 8AE-PD with piezoelectric sensors D9241A. The used eight-channel measuring system 8AE-PD enables the monitoring, recording and then basic and advanced analysis of signals.

The results of basic analysis carried out in domain of time and the results of advanced analysis carried out in the discrimination threshold domain of the recorded acoustic emission signals are presented in the paper.

In the framework of the advanced analysis, results are described by the defined by the author descriptors with acronyms ADC, ADP and ADNC. Such description is based on identifying the properties of amplitude distributions of acoustic emission signals by assigning them the level of advancement. It is shown that for signals including continoues AE or single burst AE signals descriptions of such registered signals by means of ADC, ADP and ADNC descriptors and by Upp and Urms descriptors provide identical ordering of registered acoustic emission signals. For complex signals, the description using ADC, ADP and ADNC descriptors based on the analysis of amplitude distributions of recorded signals gives the order of signals with more accurate connection with deformational processes being sources of acoustic emission signals.

Przejdź do artykułu

Autorzy i Afiliacje

Franciszek Witos

Abstrakt

The condition monitoring techniques like acoustic emission, vibration analysis, and infrared thermography, used for the failure diagnosis of bearings, require longer processing time, as they have to perform acoustical measurement followed by signal processing and further analysis using special software. However, for any bearing, its period of usage can be easily determined within an hour, by measuring the bearing sound, using sound level meter (SLM). In this paper the acoustical analysis of the spindle bearing of a radial drilling machine was performed using SLM, by measuring the sound pressure level of the bearing in decibels, for different frequencies, while muting all the other noises. Then using an experimental set up, two database readings were taken, one for new bearing and the other for completely damaged bearing, both are SKF6207, which itself is the spindle bearing. From these three sets of sound pressure level readings, the period of usage of the spindle bearing, was calculated using an interpolation equation, by substituting the life of the bearing from the manufacturer’s catalogue. Therefore, for any machine with a SKF6207 bearing, its usage time can be estimated using the database readings and one measurement on that machine, all with the same speed.

Przejdź do artykułu

Autorzy i Afiliacje

S. Charles
Joslin D. Vijaya

Abstrakt

This article shows acoustic measurements from Svalbard archipelago in the Arctic, located in the Arctic Ocean. The aim of the research was to show the Svalbard soundscape as well as to record and analyse the spatial-temporal dynamics of the acoustic environment, the human impact on the soundscape and to collect baseline data for future comparative research. Svalbard is interesting for many science disciplines because it has an arctic climate and, at the same time, it is relatively easily accessible. Climatologists, geologists, glaciologists, biologists and even anthropologists could find interesting themes to investigate here. Additionally, the soundscape of Spitsbergen is worthy of detailed examination. This paper presents comparative analysis of the soundscape of various spots near Longyearbyen in Management Area 10. The soundscape analysis of selected valleys shows the strong influence of human activity on the soundscape as well as the variability and characteristic features of the natural Arctic soundscape.

Przejdź do artykułu

Autorzy i Afiliacje

Dorota Czopek
Paweł Małecki
Janusz Piechowicz
Jerzy Wiciak

Abstrakt

One of the most effective designs to control the road traffic noise is the T-shaped barrier. The aim of this study was to examine the performance of T-shape noise barriers covered with oblique diffusers using boundary element method. A 2D simulation technique based on the boundary element method (BEM) was used to compute the insertion loss at the center frequency of each one-third octave band. In designed barriers, the top surface of the T-shaped noise barriers was covered with oblique diffusers. The width and height of the barrier stem and the width of its cap were 0.3, 2.7, and 1 m, respectively. Angles of he oblique diffusers were 15, 30, and 45 degrees. The oblique diffusers were placed on the top surface with two designs including same oblique diffusers (SOD) and quadratic residue oblique diffusers (QROD). Barriers considered were made of concrete, an acoustically rigid material. The barrier with characteristics of QROD, forward direction, and sequence of angles (15, 30, and 45 degrees) had the greatest value of the overall A-weighted insertion loss equal to 18.3 to 21.8 dBA at a distance of 20 m with various heights of 0 to 6 m.

Przejdź do artykułu

Autorzy i Afiliacje

Mohammad Reza Monazzam
Milad Abbasi
Saeid Yazdanirad

Abstrakt

Main aim of this study is to combine the characteristics of the sonic crystal (SC) with acoustic panels and porous materials to improve the sound transmission loss (STL) through the triple-panel structure. SCs cause a bandgap centered around a certain frequency (Bragg’s frequency) due to generation of destructive interference. Initially, an analytical method is developed that extends the previous theory of double-panel structure to predict STL through a triple-panel structure. Finite element (FE) simulations are performed to obtain the STL through the triple-panel, which are validated with the analytical predictions. Various configurations are analyzed using the FE method based on the method of inserting the porous material and SCs between the panels to address the combined effect. STL through the triple-panel structure is compared with that through the double-panel structure having the same total weight and total thickness. It is found that the combined structure of the triple panel and the SC with glass wool as filler gives the best soundproof performance for the same external dimensions. For narrow air gaps, filing with glass wool is more advantageous than inserting one row of SC. In addition, the triple panel combined with a SC has better soundproofing than the two-panel counterparts.

Przejdź do artykułu

Autorzy i Afiliacje

Myong-Jin Kim

Abstrakt

Ultrasonic processing in the cavitation mode is used to produce the composite materials based on the metal matrix and reinforcing particles of micro- and nano-sizes. In such a case, the deagglomeration of aggregates and the uniform distribution of particles are the expected effects. Although the particles can not only fragment in the acoustic field, they also can coagulate, coarsen and precipitate. In this paper, a theoretical study of processes of deagglomeration and coagulation of particles in the liquid metal under ultrasonic treatment is made. The influence of various parameters of ultrasound and dispersion medium on the dynamics of particles in the acoustic field is considered on the basis of the proposed mathematical model. The criterion of leading process (coagulation or deagglomeration) has been proposed. The calculated results are compared with the experimental ones known from the scientific literature.

Przejdź do artykułu

Autorzy i Afiliacje

Olga Kudryashova
Alexander Vorozhtsov
Pavel Danilov

Abstrakt

The nonlinear interaction of wave and non-wave modes in a gas planar flow are considered. Attention is mainly paid to the case when one sound mode is dominant and excites the counter-propagating sound mode and the entropy mode. The modes are determined by links between perturbations of pressure, density, and fluid velocity. This definition follows from the linear conservation equations in the differential form and thermodynamic equations of state. The leading order system of coupling equations for interacting modes is derived. It consists of diffusion inhomogeneous equations. The main aim of this study is to identify the principle features of the interaction and to establish individual contributions of attenuation (mechanical and thermal attenuation) in the solution to the system.

Przejdź do artykułu

Autorzy i Afiliacje

Anna Perelomova

Abstrakt

In this paper, a modified sound quality evaluation (SQE) model is developed based on combination of an optimized artificial neural network (ANN) and the wavelet packet transform (WPT). The presented SQE model is a signal processing technique, which can be implemented in current microphones for predicting the sound quality. The proposed method extracts objective psychoacoustic metrics including loudness, sharpness, roughness, and tonality from sound samples, by using a special selection of multi-level nodes of the WPT combined with a trained ANN. The model is optimized using the particle swarm optimization (PSO) and the back propagation (BP) algorithms. The obtained results reveal that the proposed model shows the lowest mean square error and the highest correlation with human perception while it has the lowest computational cost compared to those of the other models and software.

Przejdź do artykułu

Autorzy i Afiliacje

Mehdi Pourseiedrezaei
Ali Loghmani
Mehdi Keshmiri

Abstrakt

The present study aimed to determine the role of job components and individual parameters on the raised blood pressure among male workers of textile industry who were exposed to continuous high noise level. Information of all eligible subjects including demographic and individual characteristics, medical history and job characteristics were obtained by direct interview and referring to the medical records. All blood pressure measurements were done using mercury sphygmomanometer in the morning before work. The 8-hours equivalent A-weighted sound pressure level, the level of blood cholesterol and triglyceride, and noise annoyance was determined for each worker. As the result of weighted regression in path analysis (direct effect), only the work shift did not have a significant effect on blood pressure among the studied variables. It can be seen that variables including the level of triglyceride, cholesterol, and noise exposure have the most direct effects on blood pressure. The results of total effects showed that variables, including using the hearing protection device, age, work experience and visibility of sound source, did not have a significant effect on blood pressure. The results of this study indicate that occupational noise exposure alone and combined with other job components and individual parameters is associated with raised blood pressure. However, noise exposure was probably a stronger stressor for increased blood pressure.

Przejdź do artykułu

Autorzy i Afiliacje

Milad Abbasi
Somayeh Farhang-Dehghan
Saeid Yazdanirad
Ahmad Mehri
Malihe Kolahdouzi
Rohollah Fallah Madvari
Arash Akbarzadeh
Maryam Ghaljahi

Abstrakt

The paper presents and discusses a method of azimuth determination of ultrasonic echo arrival in air. The basis of the presented approach is the assumption that the received signal is a narrowband one. In this way, the direction of the signal arrival can be determined based on its phase shift using two receivers. When the distance between the receivers exceeds half of the wavelength of the received signal, a problem of ambiguity in determining the angle of arrival arises. To solve this, a method using multiple pairs of receivers was used. Its robustness and temperature dependence is analysed. The most important advantages of the presented approach are simplified computations and low hardware requirements. Experimental data made it possible to show that for strong echoes, the accuracy is higher than 0.5X. In the case of weak echos, it is reduced to about 2X. Because the method is based on phase shift measurement, the ultrasonic sonar that uses this method can be compact in size. Moreover, owing to the theoretical analysis, certain properties of the mutual location of the receivers were found and formally proved. They are crucial for determining proper receivers’ inter-distances.

Przejdź do artykułu

Autorzy i Afiliacje

Bogdan Kreczmer
ORCID: ORCID

Abstrakt

The Open Seminar on Acoustics is an annual conference, the largest acoustics conference in the country. It has been bringing all Polish acousticians together for over sixty years. It is organized in turns by different divisions of Polish Acoustical Society – in 2019 by the Poznan Division with the Institute of Acoustics, Adam Mickiewicz University in Poznan and Committee on Acoustics of Polish Academy of Science. The conference presents all sections of acoustics, such as: physical acoustics, technical, environmental, speech, hearing, musical, architectural acoustics, etc. The seminar is joined with special session “New trends in psychoacoustics in tribute to professors: Józef Zwisłocki and Andrzej Rakowski” and the Workshop “Noise protection in regulations – current state and directions of changes” (in Polish). We also invite you to the special session “Advances in research in the field of audio acoustics and sound engineering – ISSET 2019”.

Przejdź do artykułu

Instrukcja dla autorów

Author Guidelines
• Manuscripts intended for publication in Archives of Acoustics should be submitted in pdf format by an on-line procedure.
• Manuscript should be original, and should not be submitted either previously or simultaneously elsewhere, neither in whole, nor in part.
• Submitted papers must be written in good English and proofread by a native speaker.
• Basically, the papers should not exceed 40 000 typographic signs.
• Postal addresses, affiliations and email addresses for each author are required.
• Detailed information see Article Requirements.
• Manuscript should be accompanied by a cover letter containing the information:
o why the paper is submitted to ARCHIVES OF ACOUSTICS,
o suggestion on the field of acoustics related to the topic of the submitted paper,
o the statement that the manuscript is original, the submission has not been previously published, nor was sent to another journal for consideration,
o 3–5 names of suggested reviewers together with their affiliations, full postal and e-mail addresses; at least 3 suggested reviewers should be affiliated with other scientific institutions than the affiliations of the authors,
o author’s suggestion to classification of the paper as the research paper, review paper or technical note.

Article Requirements
1. At submission time only a PDF file is required. After acceptance, authors must submit all source material (see information about Figures). Authors can use their preferred manuscript-preparation software. The journal itself is produced in LaTeX, so accepted articles will be converted to LaTeX at production time.
2. The title of the paper should be as short as possible.
3. Full names and surnames should be given.
4. The full postal address of each affiliation, including the country name should be provided. Affiliations should contain the full postal address, as well as an e-mail address of one author designated as corresponding author.
5. The text should be preceded by a concise abstract (less than 200 words).
6. Keywords should be given.
7. The formulae to be numbered are those referred to in the paper, as well as the final formulae.
8. All notations should be written very distinctly.
9. References in the text (author(s) and year of publication) are to be cited between parentheses.
Items appearing in the reference list should be complete, including surname and the initials of the first name of the author, the full title of the paper/book in English followed by the information on the original paper language. In case of a book, the publisher's name, the place and year of publication should be given. In case of a periodical, the full title of the periodical, consecutive volume number, current issue number, pages, and year of publication should be given. All references in the bibliography should be cited in the text, and arranged in alphabetical order by authors' last name.
For more information on references see http://acoustics.ippt.gov.pl/public/Instructions.pdf.
10. Figures must be of publication quality. Each figure should be saved in separate file and captioned and numbered so that it can float. After acceptance, Authors will need to submit the original source files for all photos, diagrams and graphs in manuscript.
For diagrams and graphs vector EPS or vector PDF files are the most useful. Make sure that what you're saving is vector graphics and not a bitmap. Please also include the original data for any plots. This is particularly important if you are unable to save Excel-generated plots in vector format. Saving them as bitmaps is not useful; please send the Excel (.xls) spreadsheets instead.
Photographs should be high-quality – with resolution no lower than 300 dpi.
Pack all figure files into a single archive (zip, tar, rar or other format) and then upload on the magazine web site.

Ta strona wykorzystuje pliki 'cookies'. Więcej informacji