@ARTICLE{Meško_J._The_2017,
 author={Meško, J. and Nigrovič, R. and Zrak, A.},
 volume={vol. 17},
 number={No 4},
 journal={Archives of Foundry Engineering},
 howpublished={online},
 year={2017},
 publisher={The Katowice Branch of the Polish Academy of Sciences},
 abstract={This article deals with the technology and principles of the laser cutting of ductile cast iron. The properties of the CO2laser beam, input parameters of the laser cutting, assist gases, the interaction of cut material and the stability of cutting process are described. The commonly used material (nodular cast iron - share of about 25% of all castings on the market) and the method of the laser cutting of that material, including the technological parameters that influence the cutting edge, are characterized. Next, the application and use of this method in mechanical engineering practice is described, focusing on fixing and renovation of mechanical components such as removing the inflow gate from castings with the desired quality of the cut, without the further using of the chip machining technology. Experimental samples from the nodular cast iron were created by using different technological parameters of laser cutting. The heat affected zone (HAZ), its width, microstructure and roughness parameter Pt was monitored on the experimental samples (of thickness t = 13 mm). The technological parameters that were varied during the experiments included the type of assist gases (N2and O2), to be more specific the ratio of gases, and the cutting speed, which ranged from 1.6 m/min to 0.32 m/min. Both parameters were changed until the desired properties were achieved.},
 type={Artykuły / Articles},
 title={The Influence of Different Assist Gases on Ductile Cast Iron Cutting by CO2 Laser},
 URL={http://journals.pan.pl/Content/104615/PDF/afe-2017-0139.pdf},
 doi={10.1515/afe-2017-0139},
 keywords={Ductile cast iron, Laser cutting, Microstructure, HAZ, Assist gas},
}