@ARTICLE{Dorula_J._The_2018, author={Dorula, J. and Romelczyk, R. and Przyszlak, N. and Siodmok, B. and Studnicki, A.}, volume={vol.18}, number={No 2}, journal={Archives of Foundry Engineering}, howpublished={online}, year={2018}, publisher={The Katowice Branch of the Polish Academy of Sciences}, abstract={The subject of this paper was to compare the influence of selected coatings on bending strength of moulds and cores manufactured in a furan technology. In a range of study, there were used three kinds of coatings - water based coating and two kind of alcohol based coating manufactured by FOSECO. Coating were applicated by brush, overpouring/flow and spraying. For each application method, there were realized different kind of drying- at ambient temperature, in a furnace and by burning. Physicochemical properties of coatings were such selected to accommodate them to the application method and type of coating. Based on the conducted studies it was observed that for water based coating application method doesn’t have an important influence on bending strength and it is necessary to optimize the time and temperature of drying to achieve better results of bending strength. For alcohol based coatings, drying by burning causes significant deterioration of bending strength of the mould and core and drying process at ambient allows to obtain high bending strength of mould/cores in regard to time of drying.}, type={Artykuły / Articles}, title={The Influence of Selected Water and Alcohol Based Coatings on Bending Strength of Foundry Moulds and Cores Manufactured in Furan Technology}, URL={http://journals.pan.pl/Content/106799/PDF/AFE%202_2018_30.pdf}, doi={10.24425/122522}, keywords={water based coating, alcohol based coating, bending strength, moulding sand, furan resin}, }