Theoretical and experimental research indicates that radial loads have a significant influence on the value of belt-on-idler rolling resistances. Computational models discussed in literature use the notion of unit rolling resistance, i.e. rolling resistance per unit length of the idler. The total value of the rolling resistance of belt on a single idler is determined by integrating unit rolling resistance with respect to the length of the contact zone between the belt and the idler. This procedure requires the knowledge of normal load distribution along the contact zone between the belt and the idler. Loads acting on the idler set have been the object of both theoretical analyses and laboratory tests. Literature mentions several models which describe the distribution of normal loads along the contact zone between the belt and the idler set (Krause & Hettler, 1974; Lodewijks, 1996; Gładysiewicz, 2003; Jennings, 2014). Numerous experimental tests (Gładysiewicz & Kisielewski, 2017; Król, 2017; Król & Zombroń, 2012) demonstrated that the resultant normal loads acting on idlers are approximate to the loads calculated in theoretical models. If the resultant normal load is known, it is possible to assume the distribution of loads acting along the contact zone between the belt and the idler. This paper analyzes various hypothetical load distributions calculated for both the center idler roll and for the side idler roll. It also presents the results of calculations of belt rolling resistances for the analyzed distributions. In addition, it presents the results of calculations with allowance for load distribution along the generating line of the idler.

JO - Archives of Mining Sciences L1 - http://journals.pan.pl/Content/112267/PDF/Archiwum-64-2-02-Konieczna.pdf L2 - http://journals.pan.pl/Content/112267 IS - No 2 EP - 259 KW - belt conveyor KW - belt KW - rolling resistance KW - idler set load ER - A1 - Gładysiewicz, Lech A1 - Konieczna-Fuławka, Martyna PB - Committee of Mining PAS VL - vol. 64 JF - Archives of Mining Sciences SP - 251 T1 - Influence of Idler Set Load Distribution on Belt Rolling Resistance UR - http://journals.pan.pl/dlibra/docmetadata?id=112267 DOI - 10.24425/ams.2019.128681