Nauki Techniczne

Archives of Metallurgy and Materials

Zawartość

Archives of Metallurgy and Materials | 2016 | No 1 March |

Redakcja

Editor-in-Chief:                                                  

Paweł Zięba, Institute of Metallurgy and Materials Science PAS, Poland

                                                                                                                  

Editors:

Krzysztof Fitzner, AGH University of Science and Technology, Poland

Maciej Grabski, Warsaw University of Technology, Poland

Bogusław Major, Institute of Metallurgy and Materials Science PAS, Poland

Władysław Włosiński, Polish Academy of Sciences, Poland

                                                                                                

EDITORIAL ADVISORY BOARD

Leszek Blacha, Silesian University of Technology, Poland

Zbigniew Bojar, Military University of Technology, Poland

Eduardo Cesari, University of the Baleric Islands, Spain

Kyu Rhee Chang, Korea Atomic Energy Research Institute, Korea

Jan Dusza, Institute of Materials Research, SAS, Slovakia

Władysław Gąsior, Institute of Metallurgy and Materials Science PAS, Poland

Zbigniew Gronostajski, Wroclaw University of Technology, Poland

Edward Guzik, AGH University of Science and Technology, Poland

Peter D. Hodgson, Deakin University, Australia

Herbert Ipser, University of Vienna, Austria

George Kaptay, Research Institute on Nanotechnology, Hungary

Alexandre Kodentsov, Eindhoven University of Technology, Netherlands

Rafał Kozubski, Jagiellonian University, Poland

Aleš Kroupa, Institute of Physics of Materials AS CR, Czech Republic

Piotr Kula, Lod, z University of Technology, Poland

Jan Kusiński, AGH University of Science and Technology, Poland

Roman Kuziak, Institute of Ferrous Metallurgy, Poland

Leszek B. Magalas, AGH University of Science and Technology, Poland

Jüergen Lackner,Laser Center Leoben, Joanneum Research, Austria

Marcin Leonowicz, Warsaw University of Technology, Poland

Jerzy Lis, AGH University of Science and Technology, Poland

Graeme E. Murch, University of Newcastle, Australia

Alberto Passerone, Instituteof Physical Chemistryof Materials, Italy

Henryk Paul, Institute of Metallurgy and Materials Science PAS, Poland

Maciej Pietrzyk, AGH University of Science and Technology, Poland

Eugen Rabkin, Technion Israel Institute of Technology, Israel

Jerzy Sobczak, Foundry Research Institute, Poland

Boris B. Straumal, Russian Academy of Sciences, Russia

Pekka Taskinen, Aalto University, Finland

Stefan Zaefferer, Max-Planck-Institut, Germany

Ehrenfried Zschech,Fraunhofer Institute for Non-Destructive Testing, Germany

 

B O A R D   O F   R E V I E W

Piotr Bała, Leszek Blacha, Marek Blicharski, Zbigniew Bojar, Tomasz Czeppe, Ryszard Dąbrowski, Stanisław Dymek, Robert Filipek, Władysław Gąsior, Zbigniew Gronostajski, Franciszek Grosman, Edward Guzik, Marek Hetmańczyk, Mieczysław Jurczyk, Michał Kleiber, Rafał Kozubski, Marian Kucharski, Roman Kuziak, Jerzy Lis, Jerzy Pacyna, Maciej Pietrzyk, Piotr Kula, Jan Kusiński, Marcin Leonowicz, Zbigniew Pędzich, Henryk Paul, Jerzy Sobczak, Kurt Wiencek, Krzysztof Wierzbanowski, Waldemar Wołczyński, Jan Wypartowicz, Wojciech Zakulski, Jozef Zasadziński

Kontakt

Editorial address:
Aleja Mickiewicza 30,
AGH, pawilon  A-1 II p.  pok. 208
30-059 Kraków, Poland
Tel. +48 (12) 6173425
e-mail : archiwum4@wp.pl

 

Instrukcje dla autorów

Archives of Metallurgy and Materials is a quarterly of Polish Academy of Sciences and Institute of Metallurgy and Materials Science of the Polish Academy of Sciences, which publishes original scientific papers and reviews in the fields of metallurgy and materials science. Papers with focus on synthesis, processing and properties of metal materials, including thermodynamic and physical properties, phase relations, and their relation to microstructure of materials are of particular interest.
Submissions to Archives of Metallurgy and Materials should clearly present aspects of novelty of findings, originality of approach etc. If modeling is presented it should be logically connected to experimental evidence. Submissions which just report the results without in depth analysis and discussion will not be published.
Submission of a manuscript implies that it has not been published previously, that it is not under consideration for publication elsewhere, and that if accepted it will not be published elsewhere in the same form.
When preparing the manuscript, please pay attention to the following rules:
1. Manuscript submission
1.1. Manuscripts to be considered for publication should be submitted to the Editorial Office via www.editorialsystem.com/amm/. Authors should designate corresponding author, whose responsibility is to represent the Authors in contacts with the Editorial Office. The corresponding author receives an e-mail notification confirming the submission of the manuscript to the Editorial Office and is informed about the progress of the review process.
1.2. Manuscript should not exceed 8 pages (text with references) of full-size paper (A4), must be double spaced (please use 12 point font), with generous margins, and the pages must be numbered. Authors should submit their manuscript in .doc or .docx format, while figures should be submitted as separate files in .eps or .tiff format.
1.3. All manuscripts must be written in good English. Both British and U.S. English are acceptable but Authors should be consistent in their usage. It is sole responsibility of the Authors to make sure that the manuscript is grammatically correct and spell checked. Authors are strongly encouraged to have the manuscript proofread by a native speaker of English or a language professional, before it is submitted to the Editorial Office. Papers written in poor English will be automatically rejected without being subjected to review.
1.4. Articles submitted for publication should include abstract and maximum 5 keywords.
1.5. Please adhere to the following order of presentation:
Author(s) with first names in full.
Affiliation(s): in a short form (Institution, City, Country). Use the superscripts (*, **, . . .) after the Authors’ names in case of different affiliations.
Title: All words in lower case (first letter of first word capitalized).
Abstract: maximum 10 lines, including primary objective, research design, methods and procedures, main outcomes and results. Do not use abbreviations in the abstract.
Keywords: 5 maximum.
Main text: Begin on the second page with Introduction, followed by Experimental (Materials and Methods) and/or Theory section, Results, Discussion, and end with Conclusion section and Acknowledgement. When appropriate the Authors may choose to combine Results section and Discussion section into one Results and discussion section. Make sure the text in sections is divided logically into paragraphs.
Use the decimal system for sections, subsections and (at the most) sub-subsections, as exemplified in the headings of these instructions.
All abbreviations should be spelled out the first time they are introduced in text or references. Thereafter the abbreviation can be used.
Appendices
References 2
Correspondence address: title, name, postal address, telephone and e-mail address of the corresponding Author.
Figure captions
Tables
2. Manuscript preparation
2.1. Formulae, equations and units
Formulae and equations should be typed on separate lines and numbered consecutively in parentheses on the right side (1) . . . (n). Vectors must be indicated as such. Size of symbols should be kept uniform for all equations in the manuscript. Formulae and equations should be referred to in the text as follows: Eq. (1).
Numbers and units must be separated by a space, e.g. 5.5 wt.%, 273.15 K, 1013 MPa, etc. The only exception are angle degrees, e.g. 90°.
2.2. Figures
Figures are usually printed in reduced size (fitting column width of 85 mm) and this should be taken into account when preparing them. For the best results, make sure that lettering on figures and micrographs is at least 2 mm high after reduction, and the style of labeling must be uniform for all figures. Each figure should have its own caption explaining the content without reference to the text. Figure captions should be typed on a separate page at the end of manuscript. The appropriate place of in the text should be indicated by written in separate line. Figures should be referred to in text as follows: Fig. 1. The magnification must be indicated by a labeled scale marker on the micrograph itself, not drawn below it. For optimum printing quality micrographs should be saved as .eps or .tiff at a resolution of at least 300 dpi while line drawings at a resolution of at least 600 dpi.
2.3. Tables
Tables together with captions should be typed on separate page at the end of manuscript. Tables are to be numbered consecutively using Arabic numbers in the text (TABLE 1 . . . n). A caption must be placed above respective table and should explain the symbols used in the heading and in the left hand column. Tables should be referred to in the text as follows: TABLE 1.
2.4. References
References should be typed on separate pages and numbered consecutively applying the system accepted by the Quarterly (initials and names all authors, journal title [abbreviated according to the Journal Title Abbreviations of Web of Science: http://library.caltech.edu/reference/abbreviations/ or book title; journal volume or book publisher; page spread; publication year in bracket). Use of DOI is strongly encouraged.
Samples:
Journals:
[1] L.B. Magalas, Arch. Metall. Mater. 60 (3), 2069-2076 (2015).
[2] E. Pagounis, M.J. Szczerba, R. Chulist, M. Laufenberg, Appl. Phys. Lett. 107, 152407 (2015).
[3] H. Etschmaier, H. Torwesten, H. Eder, P. Hadley, J. Mater. Eng. Perform. (2012), DOI: 10.1007/s11665-011-0090-2 (in press).
Books:
[4] K.U. Kainer (Ed.), Metal Matrix Composites, Wiley-VCH, Weinheim (2006).
[5] K. Szacilowski, Infochemistry: Information Processing at the Nanoscale, Wiley (2012). 3
[6] L. Reimer, H. Kohl, Transmission Electron Microscopy: Physics of Image Formation, Springer, New York (2008).
Proceedings or chapter in books with editor(s):
[7] R. Major, P. Lacki, R. Kustosz, J. M. Lackner, Modelling of nanoindentation to simulate thin layer behavior, in: K. J. Kurzydłowski, B. Major, P. Zięba (Eds.), Foundation of Materials Design 2006, Research Signpost (2006).
Internet resource:
[8] https://www.nist.gov/programs-projects/crystallographic-databases, accessed: 17.04.2017 Academic thesis (PhD, MSc):
[9] T. Mitra, PhD thesis, Modeling of Burden Distribution in the Blast Furnace, Abo Akademi University, Turku/Abo, Finland (2016).
3. Fees
No honorarium will be paid. The journal does not have article submission charges.
4. Review and proofread process
4.1. Peer review process
All submitted manuscripts undergo review by renowned specialists appointed by the Editor-in-Chief and members of the Editorial Board. Reviewers receive guidance to help them perform the review, and submit written opinion on the manuscript together with recommendation to accept as is, or reject, or accept after revision. In the latter case i.e. when revision is requested, the authors are obliged to respond to Editor and Reviewers’ comments in detail and make revisions to the manuscript. A rebuttal to Reviewers’ comments can also be sent via the Editorial System in writing. Decision to reject the article is taken by the Editorial Board with the final decision belonging to the Editor, who may appoint another reviewer if necessary.
Reviewers remain anonymous to Authors and their identity cannot be revealed by the Editorial Office. When submitting the manuscript, the authors are requested to suggest names and contact details (affiliations and valid e-mail addresses) of at least three experts who could serve as reviewers. Brief explanation (2-3 sentence-long) why each person is suitable as a reviewer should also be provided. The suggested reviewers cannot be from the same country as affiliation of the corresponding author. The decision to appoint a reviewer belongs solely to the editor.
4.2. Revised manuscript submission
When revision of a manuscript is requested, Authors should return the revised version of their manuscript as soon as possible. The revised and added parts of the manuscript must be highlighted. Prompt action may ensure fast publication if a paper is finally accepted for publication in Arch. Metall. Mater. The Authors are requested to return their revised manuscript within 30 days.
4.3. Final proofreading
Authors will receive a pdf file with the edited version of their manuscript for final proofreading. This is the last opportunity to view an article before its publication on the journal web site. No changes or modifications can be introduced once it is published. Thus authors are requested to check their proof pages carefully against manuscript within 3 working days and prepare a separate document containing all changes that should be introduced. This document should be sent to the Editorial Office e-mail: amm@imim.pl
4.4. Original version
Articles published in the Archives of Metallurgy and Materials (starting from issue 1/2018 vol. 63) will be published on the pages of the publishing house of the Polish Academy of Sciences, Electronic Library of Polish Academy of Sciences.
The platform is available at www.czasopisma.pan.pl and www.journals.pan.pl
The archival issues of Archives of Metallurgy and Materials (from volume 57, 2012) will be available in the free electronic version on the DeGruyter Open websites by the end of 2018 and for an unlimited period at the Electronic Library Polish Academy of Sciences.
5. Prevent cases of plagiarism
Readers should be sure that the authors present the results of their work transparently, fair and honest, regardless of whether they are the direct authors, or used the help of a specialized entity (natural or legal person). To prevent cases of plagiarism, "ghostwriting" and "guest Authorship", the Editorial Office will require that the Authors disclosed the contribution of individual Authors in the creation of manuscript (with their affiliations and contributions, i.e. the information who is responsible for: research concept and design, collection and/or assembly of data, data analysis and interpretation, writing the manuscript). Funding sources (together with grant number) must also be revealed. The corresponding Author will bear the main responsibility for the manuscript. Detected cases will be exposed, including notifying the appropriate entities (institutions employing the Authors, scientific societies, associations of editors of scientific journals, etc.).
The publishing platform will be connected to the iThenticate anti-plagiarism system.

Submission of an article to the journal is unequivocal to expressing consent to the publication in both paper and electronic form.

Ta strona wykorzystuje pliki 'cookies'. Więcej informacji