Nauki Techniczne

Geodesy and Cartography


Geodesy and Cartography | 2014 | vol. 63 | No 1 |


The GOCE (Gravity Field and Steady-State Ocean Circulation Explorer) has significantly upgraded the knowledge on the Earth gravity field. In this contribution the accuracy of height anomalies determined from Global Geopotential Models (GGMs) based on approximately 27 months GOCE satellite gravity gradiometry (SGG) data have been assessed over Poland using three sets of precise GNSS/levelling data. The fits of height anomalies obtained from 4th release GOCE-based GGMs to GNSS/levelling data were discussed and compared with the respective ones of 3rd release GOCE-based GGMs and the EGM08. Furthermore, two highly accurate gravimetric quasigeoid models were developed over the area of Poland using high resolution Faye gravity anomalies. In the first, the GOCE-based GGM was used as a reference geopotential model, and in the second – the EGM08. They were evaluated with GNSS/levelling data and their accuracy performance was assessed. The use of GOCE-based GGMs for recovering the long-wavelength gravity signal in gravimetric quasigeoid modelling was discussed.
Przejdź do artykułu


In the paper a transformation between two height datums (Kronstadt’60 and Kronstadt’86, the latter being a part of the present National Spatial Reference System in Poland) with the use of geostatistical method – kriging is presented. As the height differences between the two datums reveal visible trend a natural decision is to use the kind of kriging method that takes into account nonstationarity in the average behavior of the spatial process (height differences between the two datums). Hence, two methods were applied: hybrid technique (a method combining Trend Surface Analysis with ordinary kriging on least squares residuals) and universal kriging. The background of the two methods has been presented. The two methods were compared with respect to the prediction capabilities in a process of crossvalidation and additionally they were compared to the results obtained by applying a polynomial regression transformation model. The results obtained within this study prove that the structure hidden in the residual part of the model and used in kriging methods may improve prediction capabilities of the transformation model.
Przejdź do artykułu


Qualitative and quantitative results of high terrain elevation effect on spectral radiance of optical satellite image which affect the accuracy in retrieving of land surface cover changes is given. The paper includes two main parts: correction model of spectral radiance of satellite image affected by high terrain elevation and assessment of impacts and variation of land cover changes before and after correcting influence of high terrain elevation to the spectral radiance of the image. Study has been carried out with SPOT 5 in Hoa Binh mountain area of two periods: 2007 and 2010. Results showed that appropriate correction model is the Meyer’s one. The impacts of correction spectral radiance to 7 classes of classified images fluctuate from 15% to 400%. The varying changes before and after correction of image radiation fluctuate over 7 classes from 5% to 100%.
Przejdź do artykułu


The fundamental importance of cartographic signs in traditional maps is unquestionable, although in the case of multimedia maps their key function is not so obvious. Our aim was to search the problem of cartographic signs as a core of multimedia maps prepared by non-cartographer in on-line Map Services. First, pre-established rules for multimedia map designers were prepared emphasizing the key role of the cartographic signs and habits of Web-users. The comparison of projects completed by a group of designers led us to the general conclusion that a cartographic sign should determine the design of a multimedia map in on-line Map Services. Despite the selection of five different map topics, one may list the general characteristics of the maps with a cartographic sign in the core.
Przejdź do artykułu


The Paper presents the optical method of fixing the off-shore objects positions from the land. The method is based on application of two reference points, having the geographical coordinates de fined. The first point was situated high on the sea shore, where also the camera was installed. The second point was intended for use to determine the topocentric horizon plane and it was situated at the water-level. The first section of the Paper contains the definition of space and disposed therein reference systems: connected with the Earth, water-level and the camera system. The second section of the Paper provides a description of the survey system model and the principles of the Charge Coupled Device – CCD array pixel’s coordinates (plate coordinates) transformation into the geographic coordinates located on the water-level. In the final section there are presented the general rules of using the worked out method in the optical system.
Przejdź do artykułu


A geodesic survey of an existing route requires one to determine the approximation curve by means of optimization using the total least squares method (TLSM). The objective function of the LSM was found to be a square of the Mahalanobis distance in the adjustment field ν . In approximation tasks, the Mahalanobis distance is the distance from a survey point to the desired curve. In the case of linear regression, this distance is codirectional with a coordinate axis; in orthogonal regression, it is codirectional with the normal line to the curve. Accepting the Mahalanobis distance from the survey point as a quasi-observation allows us to conduct adjustment using a numerically exact parametric procedure. Analysis of the potential application of splines under the NURBS (non-uniform rational B-spline) industrial standard with respect to route approximation has identified two issues: a lack of the value of the localizing parameter for a given survey point and the use of vector parameters that define the shape of the curve. The value of the localizing parameter was determined by projecting the survey point onto the curve. This projection, together with the aforementioned Mahalanobis distance, splits the position vector of the curve into two orthogonal constituents within the local coordinate system of the curve. A similar system corresponds to points that form the control polygonal chain and allows us to find their position with the help of a scalar variable that determines the shape of the curve by moving a knot toward the normal line.
Przejdź do artykułu


Research of semiotic aspects Lithuanian military air navigation charts was based on the semantic, graphic and information load analysis. The aim of semantic analysis was to determine how the conventional cartographical symbols, used in air navigation charts, correspond with carto-linguistic and carto-semiotic requirements. The analysis of all the markings was performed complex and collected by questionnaire were interviewed various respondents: pilots, cartographers and other chart users. The researches seek two aims: evaluate information and graphical load of military air navigation charts. Information load evaluated to calculate all objects and phenomenon, which was in 25 cm² of map. Charts analysis showed that in low flight charts (LFC) average information load are 4 – 5 times richer than in the operational maps. Map signs optimization on LFC has to be managed very carefully, choosing signs that can reduce the load of information and helps for the information transfer process. Graphical load of maps evaluated of aeronautical maps is not great (5 – 12%) and does not require reduction the information load and generalization of charts. Air navigation charts analysis pointed that not all air navigation sings correspond carto-semiotic requirements and must be improved. The authors suggested some new sings for military air navigation chart, which are simpler, equivalent to human psychophysical perception criteria, creates faster communication and less load on the chart.
Przejdź do artykułu


The presented preliminary research concerns the accuracy and reliability of new ultra-fast static positioning module – POZGEO-2 – in case of processing GPS data collected outside the ASG-EUPOS network. Such a case requires extrapolation of the network-derived atmospheric corrections which limits correction accuracy and, therefore, has adverse effect on the carrier phase ambiguity resolution. The presented processing tests are based on processing 5-minute long observing sessions and show that precise positioning can be supported up to 35 km from the ASG-EUPOS borders. This means that precise positioning with POZGEO-2 module can be assured for the most of the border areas of Poland.
Przejdź do artykułu


From the theory of reliability it follows that the greater the observational redundancy in a network, the higher is its level of internal reliability. However, taking into account physical nature of the measurement process one may notice that the planned additional observations may increase the number of potential gross errors in a network, not raising the internal reliability to the theoretically expected degree. Hence, it is necessary to set realistic limits for a sufficient number of observations in a network. An attempt to provide principles for finding such limits is undertaken in the present paper. An empirically obtained formula (Adamczewski 2003) called there the law of gross errors, determining the chances that a certain number of gross errors may occur in a network, was taken as a starting point in the analysis. With the aid of an auxiliary formula derived on the basis of the Gaussian law, the Adamczewski formula was modified to become an explicit function of the number of observations in a network. This made it possible to construct tools necessary for the analysis and finally, to formulate the guidelines for determining the upper-bounds for internal reliability indices. Since the Adamczewski formula was obtained for classical networks, the guidelines should be considered as an introductory proposal requiring verification with reference to modern measuring techniques.
Przejdź do artykułu


Elżbieta Bielecka, Military University of Technology, Faculty of Civil Engineering and Geodesy (WAT WIG), Poland

Editorial Advisory Board
Aleksandra Bujakiewicz, Warsaw University of Technology, Poland
Beata Medynska-Gulij, Adam Mickiewicz University (UAM), Poland
Edward Osada, University of Lower Silesia, Poland
Jan Krynski, Institute of Geodesy and Cartography (IGiK), Poland
Jerzy Rogowski, Warsaw University of Technology, Poland
Zbigniew Wisniewski, University of Warmia and Mazury in Olsztyn (UWM), Poland
Josef Adam, University of Technology and Economics, Hungary
Adam Chrzanowski, University of New Brunswick, Canada
Dorota Grejner-Brzezińska, The Ohio State University, USA
Jaakko Makinen, Finnish Geodetic Institute, Finland
Helmut Moritz, Graz University of Technology, Austria
Heinz Ruther, University of Cape Town, RSA
Michael Sideris, University of Calgary, Canada
Gabriel Strykowski, Technical University of Denmark, Denmark
Jaroslaw S. Yatskiv, Main Astronomical Observatory, Ukraine

Pawel Kamiński, Military University of Technology, Faculty of Civil Engineering and Geodesy (WAT WIG), Poland

Technical Editors
Karolina Krawczyk, Military University of Technology, Faculty of Civil Engineering and Geodesy (WAT WIG), Poland
Krzysztof Bielecki, Military University of Technology, Faculty of Civil Engineering and Geodesy (WAT WIG), Poland



Elżbieta Bielecka

Instrukcje dla autorów

GEODESY AND CARTOGRAPHY is a semiannually journal publishing peer-reviewed articles with original solutions of theoretical, experimental or applicable problems in the field of geodesy, surveying engineering, cartography, photogrammetry and related disciplines. Besides original research papers, the journal includes commissioned review papers on topical subjects and special issues arising from chosen scientific symposia or workshops.
Legal requirements
The author(s) guarantee(s) that the manuscript will not be published elsewhere in any language without the consent of the copyright owners, that the rights of the third parties will not be violated, and that the publisher will not held legally responsible should there be any claims for compensation.
Authors wishing to include figures or text passages that have already been published elsewhere are required to obtain permission from the copyright owner(s) and to include evidence that such permission has been granted when submitting their papers. Any material received without such evidence will be assumed to originate from the authors.
Manuscript submission
Submission of the manuscript implies: that the work has not been published before (except in form of an abstract or as a part of a published lecture, review or thesis); that it is not under consideration for publication elsewhere; that its publication has been approved by all co-authors, if any, as well as by the responsible authorities at the institution where the work was carried out.
Articles should be submitted on line
In case the manuscript has more than one author its submission should include the list specifying contribution of each author to the manuscript with indicating who is the author of the concept, assumptions, research methodology, data processing. Major responsibility is of the author submitting the manuscript.
The Editor will counteract in GEODESY AND CARTOGRAPHY against Ghostwriting, i.e. when someone substantially contributed to the preparation of the manuscript but has neither been included to the list of authors nor his role is mentioned in the acknowledgements as well as Ghost authorship, i.e. when the author/co-author did not contribute to the manuscript or his contribution is negligible. Any detected case of Ghostwriting and Ghost authorship will be exposed and the appropriate subjects, i.e. employers, scientific organisations, associations of editors etc, will be informed.
Electronic submission of a manuscript
Use the template to format your paper.

Layout guidelines:- use a normal, plain Times Roman font for text, italics for textual emphasis, bold for mathematical vectors,
- use the table functions of your word processing program, not spreadsheets, to make tables,
- use the equation editor of your word processing program for equations,
- place all figures with figure legends and tables with table legends in the manuscript,
- submit also all figures as separate files.
Data format:
Save your manuscript in RTF or DOC Microsoft Word for Windows format.
Figures should be provided in the vector graphics or JPG or TIF (specifically for halftone illustrations) formats will be accepted. The filename should include the figure number. Figure legends should be included in the text and not in the figure file. Scanned line drawings should be digitised with a minimum resolution of 800 dpi relative to the final figure size. For digital halftones, 300 dpi is usually sufficient. Non-standard fonts used in the vector graphics must be included. Please do not draw with hairlines. The minimum line width is 0.2 mm (0.567 pt) relative to the final size.
Manuscript preparation
Manuscripts should be typed in single-line spacing throughout on the A4 sheet with 2.5 cm margins .
1. Title page:
- a concise and informative title
- the name(s) of the author(s)
- the name(s) and address(es) of the affiliation(s) of the author(s)
- the e-mail address, telephone and fax numbers of the communicating author
2. Abstract: the paper must be preceded by a sufficiently informative abstract presenting the most important results and conclusions.
3. Keywords: three to five keywords should be supplied.
4. Introduction: should state the purpose of the investigation and give a short review of the pertinent literature.
5. Main text: including method and input data (working details must be given concisely; well-known operations should not be described in detail); results presented in tabular or graph form, with appropriate statistical evaluation, discussion of results - statement of conclusions drawn from the work, conclusions.
6. Acknowledgements: should be brief and consist of grant or individuals that require acknowledgement.
The names of funding organizations or institutions providing data should be given in full.
7. References: the list of references should be in alphabetical order and should only include works that are cited in the text and that have been published or accepted for publication. Personal communications could only be mentioned in the text. References should consist of the complete list of authors and should be given in the following form:
In the text, references should be cited by author(s) last name and year: e.g. (Beutler, 2003a), (Featherstone and Kirby, 2000), (Schwarz et al., 1990), (Sjöberg et al., 2000; Strykowski, 2001b; 2002).
8. Formulae and symbols: must be written legibly and will be typeset in italics. One-layer indexing is preferable. Numbering of formulae, if necessary should be given in brackets fitted to the right margin.
9. Footnotes: to the text should be numbered consecutively and placed on the bottom of the page to which they refer. Footnotes to the tables should be indicated by superscript lowercase letters.
10. Illustrations and tables: all figures (photographs, graphs or diagrams) and tables should be cited in the text and each numbered consecutively throughout. Lowercase roman letters should identify figure parts. Figure legends must be brief and must contain self-sufficient explanations of the illustrations. Each table should have a title and a legend explaining any abbreviation used in that table.
11. Units: SI units must be used.
12. Running head: consisting of at most 60 characters a concise banner representing the title of the article must be submitted by the author(s).
Proofreading is the responsibility of the author. Corrections should be clear; standard correction marks should be used. Corrections that lead to a change in the page layout should be avoided. The author is entitled to formal corrections only. Substantial changes in content, e.g. new results, corrected values, title and authorship are not allowed without the approval of the editor. In such case please contact the Editor-in-chief before returning the proofs.
References formatting
a. Journal Article (one author)
Nikora, V. (2006). Hydrodynamics of aquatic ecosystems: spatial-averaging perspective. Acta Geophysica, 55(1), 3-10. DOI: 10.2478/s11600-006-0043-6.
b. Journal Article (two or more authors)
Cudak, M. and Karcz J. (2006). Momentum transfer in an agitated vessel with off-centred impellers. Chem. Pap. 60(5), 375-380. DOI: 10.2478/s11696-006-0068-y.
c. Journal article from an online database
Czajgucki Z., Zimecki M. & Andruszkiewicz R. (2006, December). The immunoregulatory effects of edeine analogues in mice [Abstract]. Cell. Mol. Biol. Lett. 12(3), 149-161. Retrieved December 6.
d. Book (one author)
Baxter, R. (1982). Exactly Solvable Models in Statistical Mechanics. New York: Academic Press.
e. Book (two or more authors)
Kleiner, F.S., Mamiya C.J. and Tansey R.G. (2001). Gardner’s art through the ages (11th ed.). Fort Worth, USA: Harcourt College Publishers.
f. Book chapter or article in an edited book
Roll, W.P. (1976). ESP and memory. In J.M.O. Wheatley and H.L. Edge (Eds.), Philosophical dimensions of parapsychology (pp. 154-184). Springfield, IL: American Psychiatric Press.
g. Proceedings from a conference
Field, G. (2001). Rethinking reference rethought. In Revelling in Reference: Reference and Information Services Section Symposium, 12-14 October 2001 (pp. 59-64). Melbourne, Victoria, Australia: Australian Library and Information Association.
h. ebook
Johnson, A. (2000). Abstract Computing Machines. Springer Berlin Heidelberg. Retrieved March 30, 2006, from SpringerLink DOI: 10.1007/b138965.
i. Report
Osgood, D. W., and Wilson, J. K. (1990). Covariation of adolescent health problems. Lincoln: University of Nebraska. (NTIS No. PB 91-154 377/AS).
j. Government publication
Ministerial Council on Drug Strategy. (1997). The national drug strategy: Mapping the future. Canberra: Australian Government Publishing Service.

Ta strona wykorzystuje pliki 'cookies'. Więcej informacji