Nauki Techniczne

Archives of Civil Engineering

Zawartość

Archives of Civil Engineering | 2024 | vol. 70 | No 1

Abstrakt

This paper reviews latest developments of substructures for offshore wind turbines focusing on investigations and applications of hybrid foundations. Model tests and numerical analyses were used to simulate the loading of hybrid piles in sand. The results of pile-soil interaction were investigated to confirm the changes in soil stiffness around the hybrid monopile head. The mechanism and factors affecting the change in lateral stiffness of the hybrid foundation were explained by analysing p–y curves for M+H loading conditions in sand. Based on this research, a new shape of p–y curves for hybrid monopiles was established and a method for determining key parameters was proposed. The effectiveness of new p–y curves was verified by comparing back-calculated results with those from numerical simulations. The conducted tests confirmed that the hybrid monopile displacement is 30–50% smaller when compared to a standard monopile with similar dimensions. The gained experiences can be useful for designers and researchers to enhance the design of foundations for offshore wind turbines.
Przejdź do artykułu

Autorzy i Afiliacje

Krzysztof Trojnar
1
ORCID: ORCID

  1. Rzeszów University of Technology, Faculty of Civil and Environmental Engineering and Architecture, al. Powstanców Warszawy 12, 00-959 Rzeszów, Poland

Abstrakt

Drilled displacement columns, constructed in the form of unreinforced or reinforced concrete elements, are currently a very commonly used method of improving soft subsoil, creating an alternative to more expensive pile foundations. A frequently used solution for improving soft soils of road or railway embankments is to design a regular pattern of columns of relatively small diameter. Columns along the perimeter of the improved area are reinforced with rigid steel profiles, while the internal ones are made as concrete elements. Column heads are usually covered with a load transfer platform (layer of compacted granular fill) which is additionally reinforced with geosynthetics.
The application of soil improvement with displacement columns is not always successful. It is due to the errors and shortcomings occurring at the design stage, including simplifications in modelling, to construction faults, which may include insufficient experience of contractors and/or improper supervision.
Referring to the real object that failed, the article provides the results of numerical parametric analyses taking into account the influence of the key design parameters such as: the stiffness of the load transfer layers, the amount and stiffness of the geosynthetic reinforcement as well as the column spacing. The article presents comparisons of numerical results obtained with the finite element analyses for various approaches to geometry modelling (axisymmetric, 2D and 3D). The simulations indicate that the use of the axisymmetric model of a single column in routine design may lead to the deformations exceeding the serviceability limit states.
Przejdź do artykułu

Autorzy i Afiliacje

Waldemar Szajna
1
ORCID: ORCID
Liudmyla Bondareva
2
ORCID: ORCID
Bartosz Szatanik
3
ORCID: ORCID

  1. University of Zielona Góra, Institute of Civil Engineering, Prof. Zygmunta Szafrana 1 Street, 65-516 Zielona Góra, Poland and TPA – Technical Research Institute, Parzniewska 8 Street, 05-800 Pruszków, Poland
  2. Kyiv National University of Construction and Architecture, 31 Povitroflotski avenue, 03037, Kyiv, Ukraine and TPA – Technical Research Institute, Parzniewska 8 Street, 05-800 Pruszków, Poland
  3. TPA – Technical Research Institute, Parzniewska 8 Street, 05-800 Pruszków, Poland and MSc., Eng., TPA – Technical Research Institute, Parzniewska 8 Street, 05-800 Pruszków, Poland

Abstrakt

The paper presents the methods of determining the characteristic value on the basis of the standards: PN-B-03020:1981, PN-EN 1997-1:2008, prEN 1997-1:2022-09 and Schneider formula. Determination of the characteristic value of the undrained shear strength τfu was carried out using statistical method on the basis of the prEN 1997-1:2022-09 standard and Schneider formula. The statistical calculations were based on the results of field vane tests carried out in organic subsoil of test embankment in Antoniny test site before loading and after the 2nd embankment stage. In order to determine the undrained shear strength τfu of organic soils from field vane tests, the measured values of shear strength τf v were corrected using the average values of correction factors μ = μ(lab) determined on the basis of triaxial compression, simple shear and triaxial extension tests. The analysis of the calculation results shows that with relatively numerous data sets, large values of the coefficient of variation Vx result in significantly lower characteristic values of τfu obtained according to prEN 1997-1:2022-09, compared to the values obtained according to the Schneider formula. In the case of few data sets, for which high values of the coefficient kn are obtained, with high values of the coefficient of variation Vx , the comparison of the values according to prEN 1997-1:2022-09 with the values obtained according to the Schneider formula shows the greatest differences.
Przejdź do artykułu

Autorzy i Afiliacje

Maria Jolanta Sulewska
1
ORCID: ORCID
Zbigniew Lechowicz
2
ORCID: ORCID

  1. Faculty of Civil Engineering and Environmental Sciences, Bialystok University of Technology, Wiejska 45E St., 15-351 Bialystok, Poland
  2. Department of Geotechnical Engineering, Institute of Civil Engineering, Warsaw University of Life Sciences – SGGW, Nowoursynowska 159 St., 02-776 Warsaw, Poland

Abstrakt

Even the best project of a wind power plant (WPP) can fail if there are not favourable legal regulations for its completion. Most of the research has dealt with identification of various obstacles to implement WPP (political, social, legal, environmental). Analyses of legal barriers (LBs) have been usually made at a high degree of generality. This paper offers a thorough overview of LBs for localization of WPPs in Poland. This is the country where restrictive regulations have blocked the possibility of implementing such projects in many areas. Unfriendly law may persuade investors to choose worse wind turbines foundation conditions. In our research we focus on a problem little dealt in scientific studies, i.e. on the localization of WPP in difficult geotechnical conditions. The article presents the analytical engineering method, which includes the mutual influence between foundation piles in carrying on the construction load on a subsoil. The paper presents the geotechnical parameters responsible for calculation outcomes, the theoretical basis of the curve analysis method of settlement of a single pile and of the calculation of piles settlement working in a group and fastened with a stiff head. It also shows the effect of pile arrangement in a foundation and a load distribution of in-dividual piles, as well as a settlement and leaning of foundation of wind power turbine towers. The method enables a more precise, safer and optimal design of a wind turbine foundation.
Przejdź do artykułu

Autorzy i Afiliacje

Ireneusz Dyka
1
ORCID: ORCID
Jolanta Harasymiuk
1
ORCID: ORCID

  1. University of Warmia and Mazury, Faculty of Geongineering, Prawochenskiego str. 15, 10-720 Olsztyn, Poland

Abstrakt

Attractive large-scale glazing is currently an architectural trend. However, achieving adequate stiffness for larger glazing spans requires the use of complex cross-sections, generally aluminium sections of considerable height. Members with openwork webs are sometimes used in order to achieve increased load-bearing capacity and stiffness with reduced weight. The disadvantage is that this solution takes up a lot of space inside the building. A recently patented diagonalless member attempts to solve the above-mentioned problems. The member is fully demountable and allows glass units to be installed in the space between the chords. It consists of two chords spaced apart by metal sleeves with bolts passed through them. In this study, preliminary qualitative experimental tests were carried out to determine the behaviour of the member under load and to identify zones sensitive to local deformation. On this basis, numerical models (bar and 3D solid models, including contact interactions) were created and tested. Subsequently, the optimum sleeve spacing was determined, the effect of rotational and translational stiffness reduction at the nodes was investigated, and stress concentration zones and forms of stability loss were identified. A new form of local loss of stability of the chord facewall was identified, the so-called sliding push effect of the chord walls on the sleeve (within the larger openings). This is a completely different type of chord facewall failure from that found in known tubular welded joints. The research programme focused on identifying the phenomena occurring in the new member in order to provide a basis for further, more advanced analyses.
Przejdź do artykułu

Autorzy i Afiliacje

Kinga Saternus
1
ORCID: ORCID
Przemysław Saternus
1
ORCID: ORCID
Andrzej Szychowski
1
ORCID: ORCID

  1. Kielce University of Technology, Faculty of Civil Engineering and Architecture, Al. Tysiąclecia Panstwa Polskiego 7, 25-314 Kielce, Poland

Abstrakt

The work concerns dynamic similarity criteria of various phenomena occurring in hydraulics and fluid dynamics originally derived from ratios of forces and forces moments affecting these phenomena. The base of dynamic similarity criteria formulations and considerations is A. Flaga’s method and procedure for determining dynamic similarity criteria in different issues of fluid–solid interactions i.e. at different fluid–solid relative motions. The paper concerns the determination and analysis of dynamic similarity criteria for various practical problems encountered mainly in hydraulics and fluid dynamics at steady, smooth fluid onflow in front of a solid. Moreover, the cases of mechanically induced vibrations of a body in a stationary fluid moving with constant velocity in front of the body have been presented. Assuming authorial method and procedure for determining dynamic similarity criteria, its have been presented and analysed in the paper both well known similarity numbers obtained in another way (e.g. from dimensional analysis or differential equations for particular problems – as Reynolds, Froude, Euler, Cauchy, Strouhal, Mach numbers) – as well as several new similarity numbers encountered in different fluid solid interaction problems (e.g. new forces and moments coefficients encountered in problems of vibrating solid bodies in fluids).
Przejdź do artykułu

Autorzy i Afiliacje

Andrzej Flaga
1
ORCID: ORCID
Renata Kłaput
1
ORCID: ORCID
Łukasz Flaga
1
ORCID: ORCID

  1. Cracow University of Technology, Faculty of Civil Engineering, Wind Engineering Laboratory, Jana Pawła II 37/3a, 31-864 Cracow, Poland

Abstrakt

Significant subsoil deformation and additional loads from the new denitrification unit caused a major problem with the load-bearing capacity of the coal power plant. It was necessary to perform an advanced assessment of the technical condition of the structure. Laser scanning (LiDAR) were used to obtain detailed data upon structure. Based on the analysis of the point cloud, the location of the column axes was determined, which allowed to determine the global and local displacements of the structure. Spatial models of the structure were created. Non-linear analyses of the structure were carried out using two types of models: 1) global beam-shell 3D models of the boiler room used to calculate the magnitude of internal forces and deformations of the structure; 2) local beam-shell detailed models of selected structural elements. Based on the results of the calculations, necessary reinforcement of the structure was designed and successfully implemented. Advanced analysis of the structure using laser scanning, subsoil monitoring and complex numerical models made it possible to perform only local reinforcements of the entire complex structure.
Przejdź do artykułu

Autorzy i Afiliacje

Szymon Skibicki
1
ORCID: ORCID
Tomasz Wróblewski
1
ORCID: ORCID
Wiesław Paczkowski
1
ORCID: ORCID
Krzysztof Kozieł
2
ORCID: ORCID
Marcin Matyl
2
ORCID: ORCID
Maciej Wisniowski
3
ORCID: ORCID

  1. West Pomeranian University of Technology in Szczecin, Faculty of Civil and Environmental Engineering, al. Piastów 50a, 70-311 Szczecin, Poland
  2. Optimal Design of Structures Krzysztof Kozieł, ul. Na Piasku 12a, 44-122 Gliwice, Poland
  3. Silesian University of Technology, Faculty of Civil Engineering, ul. Akademicka 2A, 44-100 Gliwice, Poland

Abstrakt

The well-known Manning formula is usually used for the calculation of the calculative volumetric flow rate in a river or open canal. The discharge depends on the geometry of the channel, i.e. the water area, the wetted perimeter and the slope, as well as on the roughness coefficients. All these quantities are determined with some uncertainty. The article proposes a methodology for calculating the uncertainty of the roughness coefficients of the riverbed and the floodplain as well as the uncertainty of the geometric dimensions of the riverbed. Then, the method of calculating the uncertainty of the calculative discharge is then given. If these uncertainties are taken into consideration in the process of discharge calculation, then, as has been demonstrated for a hypothetical river channel, the ratio of the uncertainty to the calculated value of the discharge will change from several dozen percent in case of small flows to about ten percent in case of big, flood flows. It has also been shown that the uncertainty of the roughness coefficients has the biggest influence on the uncertainty of the flow rate. The presented calculations show that in order to take into account the influence of uncertainty of linear dimensions and roughness coefficients, the engineer designing the riverbed should assume for the calculations the flow rate increased by 10% then design flow. The obtained results can be used for homogeneous flows only, which is usually assumed in practical engineering calculations.
Przejdź do artykułu

Autorzy i Afiliacje

Leszek Oprychał
1
ORCID: ORCID
Aleksandra Bąk
1
ORCID: ORCID

  1. Military University of Technology, Department of Civil Engineering and Geodesy, ul. gen. Sylwestra Kaliskiego 2, 00 -908 Warsaw, Poland

Abstrakt

Static analyses of bridge structures are currently performed using the finite element method (FEM). Depending on the geometry of the structure and the technically required accuracy of calculations, different levels of discretization of these structures are used in their design. In the design process, beam grillage models (denoted e1, p2), shell models (denoted e2, p2) or shell-beam models (denoted e1+ e2, p3) are often used. Solid models (denoted e3+ p3) are mostly used in advanced analyses, having frequently a scientific character. It is shown that there is an impact of the applied types of the numerical model (i.e., degree of complexity, degree of discretization, accuracy of the model) of the road bridge on the calculated values of bending moments and displacements, which indirectly affects the global safety coefficient of the designed bridge structure. The main purpose of the calculations is to examine the discrepancies of analyzed internal forces and displacements depending of the type of numerical model used. The calculated values are referred to the results taken from the field tests of the existing bridge denoted MS 03, which is a continuous beam structure with the three spans 37:50 + 46:75 + 37:50 m made of prestressed concrete and with variable beam depth. On the basis of numerical simulations, the paper provides author’s recommendations for computer modeling of similar bridges.
Przejdź do artykułu

Autorzy i Afiliacje

Radosław Oleszek
1
ORCID: ORCID
Wojciech Radomski
1
ORCID: ORCID
Krzysztof Nowak
1
ORCID: ORCID

  1. Warsaw University of Technology, Faculty of Civil Engineering, Al. Armii Ludowej 16, 00-637 Warsaw, Poland

Abstrakt

The REVM method is a modernized option of classical EVM method. The new method has been developed for applying in unstable condition of works implementation. When the works can be accidentally disturbed and the impact of random disruption factors on course and results of works must be taken into consideration. Next, Randomized Budgeted Duration to Completion and Randomized Budgeted Cost to Completion that is duration and cost of works remaining to execution after each inspection, as well as the Randomized Budgeted Duration at Completion and Randomized Budgeted Cost at Completion that is duration and cost of all works of the project completion after the site inspection. Moreover, the risk of durations and costs overrun of works are evaluated. It is important that input data required for the REVM method are the similar and are measured in the same way as in typical control of advancement works. But results of the application consist new decision information. Control of the investment under deterministic conditions, without taking into account the risk of disruptions, resulted in a final deviation from the planned budget of over 7%, and from the planned completion of the investment by almost 12%. Without analysing the factor related to disruptions at the investment implementation stage, the material and financial schedule was completely outdated. On the other hand, when controlling the investment under risk conditions and introducing organizational and technological changes adequate to the inspection reports, the final deviation from the planned budget was less than 2%, and slightly more than 2% from the planned completion date. Researches confirm that the results received by using the REVM method well reflect real situation of works implementation.
Przejdź do artykułu

Autorzy i Afiliacje

Tadeusz Kasprowicz
1
ORCID: ORCID
Anna Starczyk-Kołbyk
1
ORCID: ORCID

  1. Military University of Technology, Faculty of Civil Engineering and Geodesy, ul. gen. Sylwestra Kaliskiego 2, 00–908 Warsaw, Poland

Abstrakt

The physical properties determining the strength parameters of bituminous mixtures are strongly influenced by the processes of placement and compaction. The effectiveness of this process depends on the compactive effort and is directly related to the mixture temperature. This research focused on the assessment of compactibility of mixtures designed for reflective crack relief interlayers (RCRI) which, in most cases, are applied in thin layers. The materials analysed for compactibility in this research included AC – asphalt concrete, AC AF – asphalt concrete “anti-fatigue”, SMA – stone mastic asphalt and SMA-MA – stone mastic asphalt rich in bitumen mastic. The gyratory compactor method was used to determine the compaction slope K, the locking point LP and the compaction densification index CDI. All the tested mixtures were fine-graded, i.e., contained grains up to 8 mm in diameter, each mixed with a different type of bituminous binder. The values of CDI show a substantially greater input of energy required for compaction of high-polymer modified mixtures, as compared to mixtures of the same design, yet containing the 50/70 bitumen. Locking point analysis showed that SMA and SMA-MA mixtures attain 98% relative compaction before reaching the locking point at which the aggregate skeleton starts to resist further compaction. This is quite the opposite as with the AC and AC AF mixtures. Among the tested mixtures the best compaction behaviour was observed in the case of SMA-MA 8 50/70, and this over a wide range of working temperature (100–160C°) and pressures (150 kPa, 600 kPa). The design of the mixture SMA-MA as an anti-fatigue layer assumes an increase in the content of filler and binder, as compared to conventional SMA. This composition is bound to reduce the resistance to compaction, i.e., provide a better compaction behaviour as compared to a conventional SMA mixture.
Przejdź do artykułu

Autorzy i Afiliacje

Oliwia Merska
1
ORCID: ORCID
Paweł Mieczkowski
1
ORCID: ORCID
Stanisław Majer
1
ORCID: ORCID

  1. West Pomeranian University of Technology, Faculty of Civil and Engineering, ul. Piastów 50A, 70-333 Szczecin, Poland

Abstrakt

Decision-making for the refurbishment of multi-family residential buildings is a complex and computationally difficult task. Therefore, the authors have developed a model that supports modernization planning in a long-term and comprehensive manner, i.e. from assessing the building to indicating the optimal scope of modernization. The comprehensive scope of the model includes the acquisition and provision of relevant knowledge to the model. The original methods proposed for its acquisition are derived from common expert knowledge based on linguistic terms. The methods adopted are not mandatory and may be replaced by others that provide more reliable knowledge. The fundamental aim of the proposed approach, however, is to select the optimal modernization option and allocate it over the planned modernization time horizon. An innovative optimisation approach based on decision matrices is used, allowing the selection of possible scenarios of repair options at each stage. These matrices are a set of constraints written in binary variables allowing the optimisation calculus to maintain a fixed sequence of repairs. In addition, the solutions used in the optimisation modules make it possible to take into account assumptions regarding the assumed assessment of the building’s condition and financial constraints. The developed model provides a practical and versatile tool that can be used by managers at the maintenance stage of residential buildings.
Przejdź do artykułu

Autorzy i Afiliacje

Robert Bucoń
1
ORCID: ORCID
Agnieszka Czarnigowska
1
ORCID: ORCID

  1. Lublin University of Technology, Faculty of Civil Engineering and Architecture, ul. Nadbystrzycka 40, 20-618 Lublin, Poland

Abstrakt

Biologically active areas play an extremely important role in the structure of a city and increasing their coverage, especially in large urban centres, is an activity with a number of advantages. This article compares, in terms of green spaces, two European cities of similar size – Warsaw (517.2 km2) and Oslo (454 km2). Both cities are capitals of their respective countries but implement different spatial policies in the scope of the Green Deal. In Warsaw, many industrial and post-industrial areas still exist and simultaneously urban green areas are decreasing year by year. In Oslo, a strategy based on deindustrialisation of the city and possible maximum use of urban greenery and public spaces is implemented. The research described in this article involved analysing the coverage of the analysed cities and their districts with biologically active area and then checking the correlation with other indicators that can be affected by this coverage. These included data on the incidence of the most common diseases among residents, the attractiveness of living for the elderly and families with children, as well as air and soil pollution and the occurrence of negative effects of climate change. The correlation of urban space use in terms of the presence of industrial land in relation to currently existing green spaces in the districts concerned was subsequently determined.
Przejdź do artykułu

Autorzy i Afiliacje

Alina Maciejewska
1
ORCID: ORCID
Janusz Sobieraj
2
ORCID: ORCID
Łukasz Kuzak
1
ORCID: ORCID

  1. Warsaw University of Technology, Faculty of Geodesy and Cartography, Plac Politechniki 1, 00-661, Warsaw, Poland
  2. Warsaw University of Technology, Faculty of Civil Engineering, Al. Armii Ludowej 16, 00-637 Warsaw, Poland

Abstrakt

The paper analyses the loss mechanism of roof insulation kits’ performance due to dampness increase in the insulation layers. The analyzed structures were used in standard conditions for ten years and had thermal insulation made of expanded polystyrene with a hydrophobized surface. The dampness of the thermal insulation materials was determined after the referenced period for their future fitness as roof insulation, based on laboratory tests of material samples collected from the structures. They were completed with a computer simulation of heat transfer and dampness in the partition for working conditions specified for ten years, assuming the thermal conductivity was determined for the materials collected from the analyzed roofs. It was discovered that simulation-based calculation dampness values are much lower than those observed after ten years of roof utilization. Additionally, the authors attempted to determine the correlations between the period of thermal insulation materials used in real conditions and the selected properties of the products determined in laboratory tests. To that end, the collected material was dried to constant weight and then subjected to accelerated aging through total immersion in water at room temperature, for twenty-eight days, followed by 300 freeze-thaw cycles at –20°C and +20°C. The results helped conclude that the abovementioned laboratory testing cycle does not allow for assessing the fitness for the use of the referenced products for ten years. The directions of future laboratory tests were set, suggesting extending the testing cycle at least twice.
Przejdź do artykułu

Autorzy i Afiliacje

Barbara Francke
1
ORCID: ORCID
Agnieszka Winkler-Skalna
2
ORCID: ORCID
Robert Geryło
3
ORCID: ORCID

  1. Warsaw University of Life Sciences – SGGW, Institute of Civil Engineering, Nowoursynowska 159, 02-776 Warsaw, Poland
  2. Thermal Physics, Acoustics and Environment Department, Building Research Institute, Filtrowa 1,00-611 Warsaw, Poland
  3. Building Research Institute, Filtrowa 1, 00-611 Warsaw, Poland

Abstrakt

The aim of this research was to experimentally analyse the possibility of using a rubber hose placed inside a pipeline to mitigate the water hammer phenomenon. The experiments were conducted using a steel pipeline with an inner diameter of 53 mm and an EPDM rubber hose with a diameter of 6 mm. Hydraulic transients were induced by a rapid closure of the valve located at the downstream end of the pipeline system. In order to analyse the influence of steady-state flow conditions on the maximum pressure increase, measurements were carried out for different values of initial pressure and discharge. The experimental results indicate that placing a rubber hose inside a pipeline can substantially attenuate valve-induced pressure oscillations. It was observed that the initial pressure has a significant influence on the capacity of the rubber hose to dampen the water hammer phenomenon. Comparative numerical calculations were performed using the Brunone–Vitkovský instant acceleration-based model of unsteady friction. It was demonstrated that this approach does not allow satisfactory reproduction of the observed pressure oscillations due to the viscoelastic properties of the EPDM hose used in the tests.
Przejdź do artykułu

Autorzy i Afiliacje

Michał Kubrak
1
ORCID: ORCID

  1. WarsawUniversity of Technology, Faculty ofBuilding Services,Hydro and Environmental Engineering, ul. Nowowiejska 20, 00-653 Warsaw, Poland

Abstrakt

The paper presents an analysis of a 100-meter wind measurement guyed mast located in the north-western part of the United States, in the state of Oregon. Using the RFEM software [1], the influence of the wind on the mast was analyzed according to the guidelines of two standards: American TIA-222-H [2] and European EN 1993-3-1 [3]. The purpose of this work is to show the differences between the results of static computations of the mast in terms of the considered standards. Due to the limited content of the work, the icing load on the structure was ignored in the analysis and the focus was on determining the response of the mast only in terms of wind action. The author tried to describe the differences in this respect between the standard guidelines [2] and [3]. The comments and conclusions regarding the analysis of guyed masts presented in the article have some practical aspects and can be used in design practice.
Przejdź do artykułu

Autorzy i Afiliacje

Renata Pigoń
1
ORCID: ORCID

  1. Koszalin University of Technology, Faculty of Civil Engineering, Environmental and Geodesy, ul. Sniadeckich 2, 75-453 Koszalin, Poland

Abstrakt

Monitoring the technical condition of hydrotechnical facilities is crucial for ensuring their safe usage. This process typically involves tracking environmental variables (e.g., concrete damming levels, temperatures, piezometer readings) as well as geometric and physical variables (deformation, cracking, filtration, pore pressure, etc.), whose long-term trends provide valuable information for facility managers. Research on the methods of analyzing geodetic monitoring data (manual and automatic) and sensor data is vital for assessing the technical condition and safety of facilities, particularly when utilizing new measurement technologies. Emerging technologies for obtaining data on the changes in the surface of objects employ laser scanning techniques (such as LiDAR, Light Detection, and Ranging) from various heights: terrestrial, unmanned aerial vehicles (UAVs, drones), and satellites using sensors that record geospatial and multispectral data. This article introduces an algorithm to determine geometric change trends using terrestrial laser scanning data for both concrete and earth surfaces. In the consecutive steps of the algorithm, normal vectors were utilized to analyze changes, calculate local surface deflection angles, and determine object alterations. These normal vectors were derived by fitting local planes to the point cloud using the least squares method. In most applications, surface strain and deformation analyses based on laser scanning point clouds primarily involve direct comparisons using the Cloud to Cloud (C2C) method, resulting in complex, difficult-to-interpret deformation maps. In contrast, preliminary trend analysis using local normal vectors allows for rapid threat detection. This approach significantly reduces calculations, with detailed point cloud interpretation commencing only after detecting a change on the object indicated by normal vectors in the form of an increasing deflection trend. Referred to as the cluster algorithm by the authors of this paper, this method can be applied to monitor both concrete and earth objects, with examples of analyses for different object types presented in the article.
Przejdź do artykułu

Autorzy i Afiliacje

Maria Kowalska
1
ORCID: ORCID
Janina Zaczek-Peplinska
1
ORCID: ORCID
Łukasz Piasta
1

  1. Warsaw University of Technology, Faculty of Geodesy and Cartography, pl. Politechniki 1, 00-661 Warsaw, Poland

Abstrakt

The fundamental problem from the point of view of pipeline exploitation in KGHM Polska Miedz S.A. is the very high overwearing of the pipes used for the transport of tailings, as well as determining the time of trouble-free operation of pipe system components. Failures involve significant financial outlays, severe restrictions on operation and in some cases even stopping operation. For this reason, it is vital to monitor the condition of the transport systems, as well as to determine the permissible service life of the pipe sections, after which segments at risk should be replaced or turned over in order to extend their further operation. This paper focuses on the application of interval numbers to assess the durability of piping systems. The calculations were made using classical interval numbers by using code written in INTLAB libraries. The correctness of the solutions obtained was verified using the Monte Carlo method, assuming a uniform distribution of random variables.
Przejdź do artykułu

Autorzy i Afiliacje

Iwona Duszyńska
1
ORCID: ORCID
Tomasz Krykowski
2
ORCID: ORCID
Paweł Stefanek
1
ORCID: ORCID
Joanna Bzówka
3
ORCID: ORCID

  1. KGHM Polska Miedz S.A., Oddział Zakład Hydrotechniczny, Lubin, Poland
  2. Silesian University of Technology, Faculty of Civil Engineering, Department of Mechanics and Bridges, Gliwice, Poland
  3. Silesian University of Technology, Faculty of Civil Engineering, Department of Geotechnics and Roads, Gliwice, Poland

Abstrakt

This paper attempts to relate the parameters obtained from CPTu static sounding and DPH dynamic test conducted in non-cohesive alluvial deposits of the Vistula River. The investigation was carried out in eight test stations located on the left bank of the Vistula River in Warsaw. The presented theses were based on the results of static CPTU and dynamic DPH tests obtained at 8 test stations. Additionally, in order to associate the obtained sounding results to the lithological type of the tested medium, drillings and grain size analyses were performed. The correlation of the different test methods stems from the need to identify and explain observed discrepancies against the background of different geological conditions, such as moisture content or grain size distribution. The comparative analysis of the parameters obtained from static and dynamic probing, is relevant to the alluvial sediments formed the lower over-flood terrace (called “the Praski terrace”) of Warsaw. Based on the comparison this paper proposes a correlation between the cone penetration resistance the sleeve friction and the number of blows, expressed by the functional relationship. Differences in the matching formulas were shown depending on the saturation of the tested sediments. Correlations were referred to a soil type, which enabled to specify the range of applicability of the proposed relationships. The results of the study were further used to show their diversity using statistical methods. This made it possible to assess the variability of the parameters of the non-cohesive soil, which forms a single lithogenetic unit.
Przejdź do artykułu

Autorzy i Afiliacje

Piotr Zbigniew Zawrzykraj
1
ORCID: ORCID
Anna Bąkowska
1
ORCID: ORCID

  1. University of Warsaw, Faculty of Geology, ul. Zwirki i Wigury 93, 02-089 Warsaw, Poland

Abstrakt

The goal of this study is to assess the application of the Hardening soil model in predicting the deformation of retaining walls of excavations in 2D and 3D finite element analysis at the Ho Chi Minh Metro project. Designed as the deepest underground station in the first metro line built in Ho Chi Minh City (HCMC), Opera House station is located in an area with a dense building zone and close to historical buildings. A summary of the input soil properties is provided using data from site investigations, in-situ tests, and laboratory tests. By numerical simulation using the Hardening soil model, the parameters of the soil stiffness modulus value are verified based on the Standard Penetration Test (SPT), and Pressuremeter test (PMT). The obtained results of the numerical analysis by 2D and 3D finite element methods, and field observations indicate that applying the Hardening soil model with soil stiffness modulus obtained in situ tests gives reasonable results on the displacement of the retaining wall at the final phase. The relationship between the SPT value and the stiffness modulus of HCMC sand is a function of depth. This correlation is obtained through the comparison of wall deformation between the simulation and monitoring at the construction site. The results of the difference between 2D and 3D finite element analysis also are discussed in this study.
Przejdź do artykułu

Autorzy i Afiliacje

Luc Manh Bui
1
ORCID: ORCID
Li Wu
1
ORCID: ORCID
Yao Cheng
1
ORCID: ORCID
Dao Jun Dong
1
ORCID: ORCID

  1. Faculty of Engineering, China University of Geosciences (Wuhan), No. 388 Lumo Road, Wuhan 430074, Hubei, China

Abstrakt

The ground disturbance caused by the tunnel construction will inevitably have an impact on the upper part of the constructed tunnel structure, and the railroad tunnel requires a very high level of control over the structural settlement deformation. For the problem of double-hole tunnel under the built tunnel, this paper takes Chongqing Mingyue Mountain Tunnel under the built Shanghai-Rong Railway Paihua Cave tunnel and Zheng-Yu Railway tunnel as the engineering background, and starts from the mechanism of ground loss caused by tunnel excavation, firstly, the settlement at the height of the existing tunnel strata is obtained through theoretical analysis, and the new Mingyue Mountain Tunnel under the Shanghai-Rong Railway tunnel is determined to be a more dangerous section. Further simulate and calculate the dynamic excavation process of the new double-hole tunnel underpass, and study the settlement deformation law of the Mingyue Mountain Tunnel underpassing the Hurong Railway Tunnel. According to the requirements of railroad tunnel for settlement deformation control, the new tunnel is determined to be constructed by step method to ensure the safety of railroad tunnel. The shortcomings of the theoretical calculation are analyzed to illustrate the important role of numerical simulation in the evaluation of tunnel underpass projects.
Przejdź do artykułu

Autorzy i Afiliacje

Fengfeng Guo
1
Yupeng Chen
2
Yongjie Zhang
1
Qi Feng
3
Da Cui
4

  1. Tunnel Engineering Company, Ltd. of CCCC, Beijing, China
  2. Power China Railway Construction Investment GroupCo., LTD, Beijing, China
  3. College of Pipeline and Civil Engineering, China University of Petroleum. Qingdao, China
  4. No. 7 Engineering Co., LTD, CCCC First Highway Engineering Group Co., LTD. Zhengzhou, China

Abstrakt

Numerous scholars have identified the shortcomings of imprecise terminology and substantial computational inaccuracies in the current models for predicting the axial compression capacity of CFRPstrengthened reinforced concrete (RC) cylinders. To improve the prediction accuracy of the axial compressive capacity model for CFRP-strengthened RC cylinders, the present axial compressive capacity model for CFRP-strengthened RC cylinders was scrutinized and evaluated. Drawing on Mander’s constraint theory and the concrete triaxial strength model, a novel axial compressive capacity model for CFRP-strengthened RC cylinders was proposed. This study collected 116 experimental data on the axial compression of CFRP-strengthened RC cylinders and analyzed the accuracy of various models using the data. The findings indicate that the model proposed in this study outperforms other models in predicting axial compression capacity and demonstrates high prediction accuracy. Furthermore, an analysis is conducted on the variation law of the model’s predicted value with respect to the design parameters. The proposed model in this study identifies concrete strength, stirrup spacing, and elastic modulus of CFRP as the primary factors that influence the axial compression capacity of CFRP-strengthened RC cylinders.
Przejdź do artykułu

Autorzy i Afiliacje

Guang Guo
1
ORCID: ORCID
Li Zhou
1
ORCID: ORCID
Bangkang Wang
1
ORCID: ORCID

  1. College of Architecture and Urban Planning, Guizhou University, Guiyang 550003, China

Abstrakt

This paper reports an experimental on the flexural performance of prestressed concrete-encased high-strength steel beams (PCEHSSBs). To study the applicability of high-strength steel (HSS) in prestressed concrete-encased steel beams (PCESBs), one simply supported prestressed concrete-encased ordinarystrength steel beam (PCEOSSB) and eight simply supported PCEHSSBs were tested under a four-point bending load. The influence of steel strength grade, I-steel ratio, reinforcement ratio and stirrup ratio on the flexural performance of such members was investigated. The test results show that increasing the I-steel grade and I-steel ratio can significantly improve the bearing capacity of PCESB. Increasing the compressive reinforcement ratio of PCEHSSB can effectively improve its bearing capacity and ductility properties, making full use of the performance of HSS in composite beams. Increasing the hoop ratio has a small improvement on the load capacity of the test beams; setting up shear connectors can improve the ductile properties of the specimens although it does not lead to a significant increase in the load capacity of the combined beams. Then, combined with the test data, the comprehensive reinforcement index considering the location of reinforcement was proposed to evaluate the crack resistance of specimens. The relationship between the comprehensive reinforcement index and the crack resistance of specimens was given.
Przejdź do artykułu

Autorzy i Afiliacje

Jun Wang
1
ORCID: ORCID
Yurong Jiao
1
ORCID: ORCID
Menglin Cui
1
ORCID: ORCID
Wendong Yang
1
ORCID: ORCID
Xueqi Fang
1
ORCID: ORCID
Jun Yan
1
ORCID: ORCID

  1. Northeast Forestry University, Faculty of Civil Engineering, Harbin 150000, China

Abstrakt

This paper discusses the influence of different sign conventions for strains and stresses, i.e. the solid mechanics sign convention and the soil mechanics sign convention, on the form of governing partial differential equations (the static equilibrium equations and the continuity equation) used to describe the wave-induced cyclic response of a poro-elastic seabed due to propagation of a sinusoidal surface water-wave. Some selected analytical solutions, obtained by different authors and published in specialist literature in the form of complex functions describing the wave-induced pore-fluid pressure, effective normal stress and shear stress oscillations in the seabed, have been analysed and compared with each other mainly with respect to different sign conventions for stains and stresses and also with regard to different orientations of the positive vertical axis of the two-dimensional coordinate system and different directions of surface water-wave propagation. The performed analyses of the analytical solutions has indicated many inaccuracies, or even evident errors and exemplary mistakes of wrong-signed values of basic wave-induced response parameters (the shear stress in particular), thereby disqualifying these solutions and their final equations from practical engineering applications. Most of the mistakes found in the literature must be linked to authors’ lack of understanding and consistency in an uniform application of a certain sign convention for strains and stresses in the soil matrix at both stages of mathematical formulation of the governing problem and correct interpretation of equations of the final analytical solution. The present paper, based mostly on a thorough literature review, ought to draw attention and arouse interest among coastal scientists and engineers in proper identification and use of the existing analytical solutions to the wave-induced cyclic seabed response – solutions which differ very often in the applied sign convention for stresses in the soil matrix.
Przejdź do artykułu

Autorzy i Afiliacje

Waldemar Magda
1
ORCID: ORCID

  1. Gdansk University of Technology, Faculty of Civil and Environmental Engineering, Department of Geotechnical and Hydraulic Engineering, 11/12 Gabriela Narutowicza Street, 80-233 Gdansk, Poland

Abstrakt

In this research, a series of centrifuge model tests and dynamic response analyses were conducted to elucidate the impact of a composite structure comprised of a reinforced earth-pressure-resistant technique, using both masonry blocks and the reinforced earth method, which was installed at the slope toe end of an aged reservoir. The purpose of the study was to evaluate the seismic response of the embankment. The experimental tests included shaking table tests that were performed on an unreinforced embankment as well as a masonry block reinforced embankment, both in a water storage condition. The dynamic behavior of the embankment, as well as the propagation of slip failure, were compared and verified. Through the use of elasto-plastic dynamic response analysis, using the finite element method, the location of the slip surface, the settlement of the embankment and the dynamic response characteristics, as obtained experimentally, were examined to clarify the effects of the counter measure structure. The results indicate that the implementation of masonry blocks and the reinforcement installed behind them greatly improve the stability of the slope of the embankment, suppress the shear failure of the upper part of the embankment, and effectively prevent overall deformation of the embankment.
Przejdź do artykułu

Autorzy i Afiliacje

Bohan Wang
1
ORCID: ORCID
Yoshiyuki Mohri
2
ORCID: ORCID
Hidekazu Tagashira
3
ORCID: ORCID
Akira Izumi
4
ORCID: ORCID
Tadatsugu Tanaka
5
ORCID: ORCID

  1. Agr., Research & Development Institute, Takenaka Corporation, 5-1, 1-chome, Otsuka, Inzai-shi, Chiba, Japan
  2. Agr., Ibaraki University, 3-21-1, Amimachi chuou, Inashiki, Ibaraki, Japan
  3. Institute of Rural Engineering, 2-1-6 Kannondai, Tsukuba, Ibaraki, Japan
  4. Agr., Institute of Rural Engineering, 2-1-6 Kannondai, Tsukuba, Ibaraki, Japan
  5. Agr., University of Tokyo, 7-3-1, Hongo, Bunkyo,Tokyo, Japan

Abstrakt

In order to analyze the relationship between the configuration characteristics, variable mass permeability characteristics and the catastrophe mechanism of falling column process, The influence of the permeability was studied by diffraction instrument, And using the seepage test system of the fall column, The seepage instability process of variable mass broken rock mass is analyzed, The findings suggest that, The proportion of coarse particles accounted for 89.86%, Fine particles accounted for 10.14%, Broken rock particles is better, Low compression performance; The fall column, under strong hydrodynamic conditions, Due to its strong characteristics of migration and loss with water flow, It is easy to induce the subsidence column protrusion water disaster; As the ratio between coarse and fine aggregates increases, Porosity and permeability are both increased; When the axial displacement does not change, With the increasing circumference pressure, The permeability of the broken rock samples is decreasing; The fitting of the seepage velocity of the broken rock mass to the pore pressure gradient follows the Forchheimer relationship, The seepage of the broken rock mass belongs to the category of non-Darcy flow under the triaxial stress; The instability of the subsidence column fracture rock mass presents three seepage instability forms: initial seepage stage, seepage mutation stage and piping stage in different stages.
Przejdź do artykułu

Autorzy i Afiliacje

Jie Suo
1
ORCID: ORCID
Qirong Qin
1
ORCID: ORCID
Zhenhua Li
2
ORCID: ORCID

  1. School of Geoscience and Technology, Southwest Petroleum University, Chengdu 610500, China
  2. School of Energy Science and Engineering, Henan Polytechnic University, Jiaozuo 454000, China

Abstrakt

Since the establishment of the People’s Republic of China, the country has made significant progress in tunnel construction, transforming from a “weak tunnel nation” to a “strong tunnel nation.” As of 2022, China has undertaken more than 60 projects involving large-diameter shield tunnels. To promote the sustainable and high-quality development of large-diameter shield tunnels in China, this article systematically reviews the development history of large-diameter shield tunnels, summarizes the current projects in the country, and addresses various aspects such as construction technology management, design technology, ecological conservation, safety, and intelligence. The article also provides suggestions for the development of large-diameter shield tunnels in China, with the aim of playing a proactive role in promoting their advancement.
Przejdź do artykułu

Autorzy i Afiliacje

Wei Qiu
1
ORCID: ORCID
Xin Dong
1
ORCID: ORCID
Linjian Su
1
ORCID: ORCID
Xingwei Xue
2
ORCID: ORCID
Kexin Zhang
2
ORCID: ORCID

  1. Engineering Department, Guangzhou Expressway Co., LTD, China
  2. School of Transportation and Surveying Engineering, Shenyang Jianzhu University, China

Abstrakt

Due to the increase in traffic volume, load level, and service life of existing bridges, the bending bearing capacity of reinforced concrete beams (hereinafter referred to as RC beams) has decreased, leading to safety issues. In order to solve the problem of insufficient flexural bearing capacity of RC beams, this article adopts the method of ultra-high performance concrete (UHPC) flexural strengthening RC beams, establishes a finite element model of UHPC-RC reinforcement system, and conducts stress analysis with reinforcement thickness, reinforcement range, reinforcement form, and reinforcement height as parameters to determine the optimal scheme of the reinforcement system. Based on the calculation results, a theoretical formula for the maximum principal stress and maximum deflection of the reinforcement system is proposed. To verify the feasibility of the plan, a reinforcement design was carried out on an existing beam, and it was found that the bending bearing capacity of the RC beam increased by 21%; the high tensile strength of UHPC and the addition of steel fibers have a good limiting effect on cracks; The steel plate of the reinforcement system can be used as a template, reducing construction costs and having good economy.
Przejdź do artykułu

Autorzy i Afiliacje

Jiawei Wang
1
ORCID: ORCID
Feifei Ying
1
ORCID: ORCID

  1. Anhui Polytechnic University, School of Architecture and Civil Engineering, Wuhu City, Beijing MiddleRoad, China

Abstrakt

The basic characteristics of debris flows in the Shiwei river basin are summarized through the field investigation on debris flows in the Shiwei river basin and analysis on formation conditions of debris flows from three aspects, i.e. geological environment, geological structure and neotectonic movement, as well as seismic action. Based on this, the stability of landslide in the Shiwei river basin is analyzed and calculated, and the stability coefficient of landslide is obtained. The debris flows in the Shiwei river basin will directly damage and threaten the county town, while other geological disasters such as landslide, collapse, slope sliding & collapse and potentially unstable slopes will indirectly damage and threaten the county town. The landslide form is clear, and the landslide stability calculation shows that the landslide body is generally stable – basically stable, but partially unstable – less stable. The “blocking + discharging” comprehensive control scheme is proposed according to the formation conditions and development characteristics of debris flows in the Shiwei river basin, and the study findings can be used as a reference for similar projects.
Przejdź do artykułu

Autorzy i Afiliacje

Hanhui Wu
1
ORCID: ORCID

  1. Civil Engineering, School of Civil Engineering, Chongqing Chemical Industry Vocational College, 400020 Chongqing, China

Abstrakt

Buckling restrained brace is an important structure for improving the seismic resistance of structures. Conducting research on new types of buckling restrained brace can improve the seismic performance and reliability of buckling resistant support. Four different types of buckling restrained braces specimens were designed and manufactured: cross-shaped square steel pipe members, cross-shaped round steel pipe members, cross-shaped carbon fiber members, and in-line carbon fiber members. By conducting quasi-static tests, the force displacement hysteresis curves, skeleton curves, stiffness degradation, equivalent viscous damping coefficient, and energy dissipation ratio of four different types of buckling restrained brace were analyzed. The research results showed that all four buckling restrained brace specimens have good hysteresis performance. The load-bearing capacity and energy consumption performance of the three specimens of square steel pipe, round steel pipe and carbon fiber with the same core unit are the same, but the inline type is worse than the cross type. The core unit specimen with a width of 80 mm is about 60% higher in bearing capacity and energy consumption than a specimen with a width of 50 mm. The core unit of some specimens undergoes multi-wave buckling. For carbon fiber specimens, the CFRP is prone to breakage due to the lateral thrust of the restraining unit. Therefore, steel hoop or stirrup should be added to the end to improve the restraint effect when designing and manufacturing.
Przejdź do artykułu

Autorzy i Afiliacje

Yuan Fang
1
ORCID: ORCID
Lei Lv
1
ORCID: ORCID
Yuqiang Gao
2
ORCID: ORCID
Zhongqiu Fu
2
ORCID: ORCID

  1. Department of Architecture and Civil engineering, Zhejiang Tongji Vocational College of Science and Technology, Hangzhou 311231, China
  2. College of Civil and Transportation Engineering, Hohai University, Nanjing 210098, China

Abstrakt

The mechanical properties of soil in soft soil area are poor, and the settlement of the underlying layer in the composite foundation accounts for a large proportion of the total settlement. At present, most of the research focuses on the settlement of the reinforced area, and the research on the settlement of the underlying layer is of great significance for the settlement of soft soil composite foundation. The differences in load transfer modes of soil and pile are analyzed, and based on the Boussinesq solution and Mindlin solution, a calculation method for the stress and settlement of the underlying layer in flexible and rigid pile composite foundation is proposed. The relative displacement of soil and pile in flexible pile composite foundation is small, and the negative friction can be ignored, but the influence of effective pile length should be considered. The relative displacement of soil and pile in rigid pile composite foundation is large, so the negative friction should be considered. Part of soil top stress is transmitted to the pile via negative friction, and then the pile axial force is transmitted back to the soil via positive friction. In addition to effective pile length, the change of stress transfer path caused by negative friction should also be considered in settlement calculation.
Przejdź do artykułu

Autorzy i Afiliacje

Yaoting Xiao
1
ORCID: ORCID
Jing Wang
1
ORCID: ORCID

  1. Hubei University of Arts and Science, College of Civil Engineering and Architecture, No. 296, Longzhong Road, Xiangyang, Hubei, China

Abstrakt

Appropriate design in linear construction depends on many factors, including detailed geological conditions. One of the biggest problems are unrecognized erosion forms, in particular karst ones, which have a huge impact on the design and subsequent operation of roads. For this purpose, in addition to conventional methods such as drilling or geotechnical probing, which are point-based, non-invasive spatial geophysical methods are used. This article presents an example of the use of geoelectrical surveys, Electrical Resistivity Tomography (ERT) for the recognition of karst zones for linear investments. The article describes ERT investigations, which to some extent allows to identify dangerous karst phenomena occurring in the Lublin Upland (Poland), which are of great importance at the design stage of roads and in their further safe operation. Non-invasive geophysical research has been verified and confirmed by traditional geotechnical research, which confirms the effectiveness of their use. The Electrical Resistivity Tomography was used as a method providing a broader spectrum of knowledge on the spatial arrangement of soil layers in the subgrade of the planned road investments. It also enabled a more accurate, more detailed interpretation of geotechnical studies. The described geophysical investigations opens wide possibilities for their application to researchers. In the future, non-invasive methods have a chance to become as reliable as geotechnical methods, but this requires a lot of research to improve the effectiveness and accuracy of the interpretation of the obtained results.
Przejdź do artykułu

Autorzy i Afiliacje

Maciej Maślakowski
1
ORCID: ORCID
Anna Lejzerowicz
1
ORCID: ORCID
Grzegorz Pacanowski
1
ORCID: ORCID
Rafał Kuszyk
2
ORCID: ORCID

  1. Warsaw University of Technology, Faculty of Civil Engineering, Al. Armii Ludowej 16, 00-637 Warsaw, Poland
  2. Polish Geological Institute – National Research Institute, Rakowiecka 4, 00-975 Warsaw, Poland

Abstrakt

In order to obtain the change rule of surrounding rock structure displacement and supporting structure internal force with time during the construction of the low mountain ridge tunnel, this paper relies on the Xishan Tunnel Project as the background. During tunneling, the displacement around the tunnel, the subsidence of the surface, the internal force of the steel arch and the pressure between the two layers of support are monitored dynamically. According to the above monitoring and measurement data, and the monitoring data analysis and nonlinear regression fitting, the predicted trend curve is obtained, the displacement change rules and characteristics of various surrounding rocks of the tunnel are obtained, to ensure the construction safety and stability requirements of supporting structure, and to provide a reasonable opportunity for the construction of secondary lining.
Przejdź do artykułu

Autorzy i Afiliacje

Jian Ouyang
1
ORCID: ORCID
Haijun Wang
1
ORCID: ORCID
Luxiang Wu
1
ORCID: ORCID
Kexin Zhang
2
ORCID: ORCID
Xingwei Xue
2
ORCID: ORCID

  1. Engineering Department, Guangzhou Expressway Co., LTD, China
  2. School of Transportation and Surveying Engineering, Shenyang Jianzhu University, China

Abstrakt

The treelike structure links members and transfers loads via its solitary cast steel joint with branches. Therefore, the joint’s bearing capacity significantly affects the treelike structure’s stability, security, and economics. This paper utilized experimental verification and numerical modeling to examine the mechanical behavior of cast-steel joints with branches in the treelike structure under various loading conditions. Then, researchers investigated the failure process and mechanism of joints, and the three most common failure modes were outlined. Furthermore, the researchers proposed the bearing capacity calculation formula based on the common failure modes. The results show that the three common failure modes of the cast-steel joints with branches under different loading conditions are the failure in the joint core area under the axial load, the failure in the main pipe compression side under eccentric load, and the failure in the compression side of the single branch pipe root when the single branch pipe is under the uneven load. The suggested empirical calculation method can serve as a reference point for similar engineering practices design.
Przejdź do artykułu

Autorzy i Afiliacje

Feng Chen
1
ORCID: ORCID
Yun Sun
1
ORCID: ORCID
Shuxuan Sun
1
ORCID: ORCID
Da Song
1
ORCID: ORCID
Yangbing Liu
1
ORCID: ORCID

  1. Nanyang Institute of Technology, School of Civil Engineering, No. 80 Changjiang Road, 473306 Nanyang, China

Abstrakt

The excavation of adjacent pits following the initial foundation pit excavation can significantly influence ground settlement. Using a foundation pit excavation project in Changzhou as a prototype, this study employed the numerical simulation method in conjunction with the HSS model to analyze the settlement deformation characteristics of the original excavation and compare them with the recorded monitoring values. In this study, the analysis focused on the ground settlement between two pits by varying the spacing between them at different excavation depths. The findings revealed that the ground settlement does not exhibit a significant increase when the new pit is excavated at a shallow depth. However, it rapidly increases when the excavation depth of the new pit surpasses that of the existing pit. Furthermore, an increase in the distance between the two pits causes the maximum settlement position to shift towards the edge of the new pit. The maximum ground settlement is found to have a linear relationship with both the maximum horizontal displacement of the two pits and the spacing between them.
Przejdź do artykułu

Autorzy i Afiliacje

Yan Wu
1
ORCID: ORCID

  1. Changzhou University Huaide College, Architecture and Environmental Engineering Department, Tiazhou, Jiangsu, China

Abstrakt

In promoting the construction of prefabricated residential buildings in Yunnan villages and towns, the use of precast concrete elements is unstoppable. Due to the dense arrangement of steel bars at the joints of precast concrete elements, collisions are prone to occur, which can affect the stress of the components and even pose certain safety hazards for the entire construction project. Because the commonly used the steel bar obstacle avoidance method based on building information modeling has low adaptation rate and cannot change the trajectory of the steel bar to avoid collision, a multi-agent reinforcement learning-based model integrating building information modeling is proposed to solve the steel bar collision in reinforced concrete frame. The experimental results show that the probability of obstacle avoidance of the proposed model in three typical beam-column joints is 98.45%, 98.62% and 98.39% respectively, which is 5.16%, 12.81% and 17.50% higher than that of the building information modeling. In the collision-free path design of the same object, the research on the path design of different types of precast concrete elements takes about 3–4 minutes, which is far less than the time spent by experienced structural engineers on collision-free path modeling. The experimental results indicate that the model constructed by the research institute has good performance and has certain reference significance.
Przejdź do artykułu

Autorzy i Afiliacje

Hong Chai
1
ORCID: ORCID
Junchao Guo
1
ORCID: ORCID

  1. YellowRiver Conservancy Technical Institute, Department of Civil Engineering and Transportation Engineering, 475000 Kaifeng, China

Abstrakt

The profit margin of construction enterprises has been continuously declining over the past few years, and the competition for contracts among construction enterprises turns out to be increasingly fierce. Construction contracting enterprises should consider the profitability of the construction contracting enterprise and its ability to continuously obtain orders when setting cost budget targets for project management departments. Thus, a dual objective decision-making model is built in this study, minimizing overall construction costs and maximizing owner satisfaction to clarify the contracting conditions of the project management department and facilitate decision-making optimization of cost and owner satisfaction goals. Moreover, the actual effect of the proposed model method is verified through case calculations. As indicated by the results, under the premise of maximizing owner satisfaction, the model optimization cost is lower than the actual cost that has already occurred. Furthermore, it conforms to the goal of maximizing owner satisfaction while fulfilling the goal of minimizing engineering costs.
Przejdź do artykułu

Autorzy i Afiliacje

Xiaofu Zhang
1
ORCID: ORCID

  1. School of Civil Engineering and Architecture, Anyang Normal University, Anyang 455000, China

Abstrakt

In this paper, the authors present an extension of the scope of the previously conducted research to the full three-dimensional computer simulation (using the finite element method), which takes into account the interaction between: heavy caterpillar tracks system – working platform – weak subsoil. The article presents a computer model considering two caterpillars, resting on elastic-plastic sub-soil, with standard Mohr-Coulomb yield conditions, allowing for computer simulation of the behavior of the system up to achievement of ultimate limit state. The results of the above model are treated as the reference for a simplified Analytical Models of estimating the limit state, which might be used in design procedures. In turn, these Analytical Models are enhancements of previously presented one. The most important results concluding form the Analytical Model are simple interaction formulas, in the space of moments acting on the machine-subsoil system, limiting a domain of safety in given soil conditions.
Przejdź do artykułu

Autorzy i Afiliacje

Aleksander Urbański
1
ORCID: ORCID
Mateusz Richter
2
ORCID: ORCID

  1. Cracow University of Technology, Faculty of Environmental Engineering and Energy, ul. Warszawska 24, 31-155 Krakow, Poland
  2. University of Agriculture in Krakow, Department of Rural Building, Al. Mickiewicza 24/28, 59-130 Krakow, Poland

Abstrakt

With its position as the capital, Hanoi is the political center as well as the second largest economic center of the country. Therefore, the city is always allocated a large budget in construction investment to create material facilities for political tasks and economic and social development. During the implementation of construction projects, a number of difficulties and limitations have appeared. In which, projects are delayed in construction and disbursement, reducing investment efficiency and not meeting the expectations of the government and people. From this fact, the authors have conducted a study to evaluate the causes affecting the time schedule of construction projects in Hanoi. The method F-APH (Fuzzy Analytic Hierarchy Process) was used to analyze data objectively and accurately about the causes affecting the time schedule. From there, these causes are classified into groups of subjective causes (from within the project) and groups of objective causes (from outside the project). The results show that subjective causes, originating from project participants, have a stronger influence than objective causes. A number of specific proposals to the actors involved in construction projects are made to eliminate or limit the impact of the causes of construction progress.
Przejdź do artykułu

Autorzy i Afiliacje

Dinh Tuan Hai
1
ORCID: ORCID

  1. Hanoi Architectural University, Faculty of Civil Engineering, Km 10, Nguyen Trai Street, Thanh Xuan District, Hanoi City, Vietnam

Abstrakt

There are several large karst caves at haunch part of the Lidong Tunnel during construction, together with inrush water due to high pressure within these caves. In light of it, this paper takes YK342+113 section as an example and adopts finite difference software FLAC 3D, so as to analyze tunnel deformation when crossing karst caves under six different working conditions, including with or without karst cave, before and after karst treatment, along with support locations. According to analysis results: First, the wall rock mainly had deformation at tunnel vault when evacuating at the third bench, which is a critical monitoring focus for tunnel construction; Second, karst cave treatment contributed to better conduct forces on both sides of wall rock, thus reducing vault settlement, while not affecting horizontal convergence and upturn of vaults; Third, treatment measures were proved to be effective in minimizing wall rock deformation by comparing deformation curves under different conditions; Fourth, after treatment measures, the angular points within the cave’s chamber had stress concentration, which might cause secondary collapse. Field monitoring data revealed that the final settlement of the tunnel vault was relatively consistent with the numerical analysis results, with a distinct change in daily settlement after initial support construction. By integrating numerical analysis and field monitoring, the rationality of the karst treatment plan was fully verified, providing a valuable reference for similar projects.
Przejdź do artykułu

Autorzy i Afiliacje

Kai Zhu
1
ORCID: ORCID
Kui Zhang
2
ORCID: ORCID
Xiang-Dong Wu
3
ORCID: ORCID
Xiang-Ge Chen
4 5
ORCID: ORCID

  1. Guangdong Nanyue Transportation Investment and Construction Co., Ltd, Guangzhou 510199, China
  2. Shenzhen ExpresswayOperation andDevelopmentCo., Ltd, Shenzhen 518110,China
  3. Poly ChangDa Engineering Co., Ltd, Guangzhou 510620, China
  4. Chongqing Jiaotong University, School of Civil Engineering, Chongqing 400074, China
  5. State Key Laboratory of Mountain Bridge and Tunnel Engineering, Chongqing 400074, China

Zasady etyki publikacyjnej

ETHICS POLICY

”Archives of Civil Engineering” respects and promotes the principles of publishing ethics. Being guided by COPE’s Guidelines ( https://publicationethics.org/resources/guidelines) we ensure that all participants of the publishing process comply with these rules, the journal pays special attention to:

Editor Responsibilities
1. Qualifying individual manuscripts for publication only on the basis of: (a) compliance with the guidelines provided to the authors, (b) substantive value, (c) originality, (d) transparency of presentation
2. Deciding whether the paper fulfills all requirements i.e. formal and scientific and which articles submitted to the journal should be published. In making these decisions, the editor may be guided by the policies of the journal’s editorial board as well as by legal requirements regarding libel, copyright infringement, and plagiarism.
3. Evaluating manuscripts for intellectual content without regard to race, gender, sexual orientation, religious belief, ethnic origin, citizenship, or political philosophy of the author(s).
4. Ensuring scientific accuracy and complying with the principle of authorship; making sure that individual authors who contribute to the publication accept its form after the scientific editing
5. Providing a fair and appropriate peer review process.
6. Withdrawing manuscripts from publication, if any information about its unreliability appeared, also as a result of unintentional errors, features of plagiarism or violation of the rules of publishing ethics were identified.
7. Requiring all contributors to disclose relevant competing interests and publish corrections if competing interests are revealed after publication. If needed, other appropriate action should be taken, such as the publication of a retraction or expression of concern.
8. Maintaining the integrity of the academic record, precludes business needs from compromising intellectual and ethical standards, and is always willing to publish corrections, clarifications, retractions, and apologies when needed.
9. Not disclosing any information about a manuscript under consideration to anyone other than the author(s), reviewers and potential reviewers, and in some instances the editorial board members, as appropriate.

Reviewer Responsibilities
1. Cooperating with the scientific editor and / or editorial office and the authors in the field of improving the reviewed material;
2. Being objective and expressing the views clearly with appropriate supporting arguments.
3. Assessing of the entrusted works in a careful and objective manner, if possible with an assessment of their scientific reliability and with appropriate justification of the comments submitted;
4. identifying relevant published work that has not been cited by the authors
5. calling to the editor's attention any substantial similarity or overlap between the manuscript under consideration and any other published data of which they have personal knowledge
6. Maintaining the principle of fair play, excluding personal criticism of the author (s)
7. Maintaining confidentiality, which is not showing or discussing with others except those authorized by the editor. Any manuscripts received for review are treated as confidential documents.
8. Performing a review within the set time limit or accepting another solution jointly with ACE in the event of failure to meet this deadline.
9. Notifying the editor if the invited reviewer feels unqualified to review the manuscript or knows that its timely review will be impossible.
10. identifying relevant published work that has not been cited by the authors
11. Not considering evaluating manuscripts in which they have conflicts of interest resulting from competitive, collaborative, or other relationships or connections with any of the authors, companies, or institutions connected to the submission.

Author Responsibilities
1. Results of original research should present an accurate account of the work performed as well as an objective discussion of its significance. Underlying data should be represented accurately in the manuscript. A paper should contain sufficient detail and references to permit others to replicate the work. Fraudulent or knowingly inaccurate statements constitute unethical behaviour and are unacceptable.
2. The authors should follow the principle of originality, which is submitting only their own original works, and in the case of using the works of other authors, marking them in accordance with the rules of quotation, or obtaining consent for the publication of previously published materials from their owners or administrators;
3. An author should not in general publish manuscripts describing essentially the same research in more than one journal or primary publication. Parallel submission of the same manuscript to more than one journal constitutes unethical publishing behaviour and is unacceptable.
4. Authorship should be limited to those who have made a significant contribution to the conception, design, execution, or interpretation of the reported study and phenomena such as ghostwriting or guest authorship in the event of their detection must be actively counteracted.
5. All authors should report in a Reliable manner the sources they used to create their own study and their inclusion in the attachment bibliography;
6. All those who have made significant contributions should be listed as co-authors. Where there are others who have participated in certain substantive aspects of the research project, they should be named in an Acknowledgement section.
7. The corresponding author should ensure that all appropriate co-authors (according to the above definition) and no inappropriate co-authors are included in the author list of the manuscript, and that all co-authors have seen and approved the final version of the paper and have agreed to its submission for publication.
8. All authors should disclose in their manuscript any financial or other substantive conflict of interest that might be construed to influence the results or their interpretation in the manuscript. All sources of financial support for the project should be disclosed.
9. When an author discovers a significant error or inaccuracy in his/her own published work, it is the author’s obligation to promptly notify the journal’s editor or publisher and cooperate with them to either retract the paper or to publish an appropriate erratum.

Publisher’s Confirmation
In cases of alleged or proven scientific misconduct, fraudulent publication or plagiarism the publisher, in close collaboration with the editors, will take all appropriate measures to clarify the situation and to amend the article in question. This includes the prompt publication of an erratum or, in the most severe cases, the complete retraction of the affected work.

Procedura recenzowania

Manuscript Peer-Review Procedure

”Archives of Civil Engineering” makes sure to provide transparent policies for peer-review, and reviewers have an obligation to conduct reviews in an ethical and accountable manner. There is clear communication between the journal and the reviewers which facilitates consistent, fair, and timely review.

-The model of peer-review is double-blind: the reviewers do not know the names of the authors, and the authors do not know who reviewed their manuscript (but if the research is published reviewers can eventually know the names of the authors). A complete list of reviewers is published in a traditional version of the journal: in-print.
-It is the editor who appoints two reviewers; however, if there are discrepancies in the assessment the third reviewer can be appointed.
-After having accepted to review the manuscript (one-week deadline), the reviewers have approximately 6 weeks to finish the process.
-The paper is published in ACE provided that the reviews are positive. All manuscripts receive grades from 1-5, 5 being positive, 1 negative, the authors receive reviews to read and consider the comments.
-Manuscript evaluations are assigned one of five outcomes: accept without changes, accept after changes suggested by the reviewer, rate manuscript once again after major changes and another review, reject, withdraw.
-Manuscripts requiring minor revision (accept after changes suggested by the reviewer) does not require a second review. All manuscripts receiving a "Rate manuscript once again after major changes and another review " evaluation must be subjected to a second review. Rejected manuscripts are given no further consideration. There are cases when the article can be withdrawn, often upon the request of an author, technical reason (e.g. names of authors are placed in the text, lack of references, or inappropriate structure of the text), or plagiarism.
-The revised version of the manuscript should be uploaded to the Editorial System within six weeks. If the author(s) failed to make satisfactory changes, the manuscript is rejected.
-On acceptance, manuscripts are subject to editorial amendment to suit house style.
-Paper publication requires the author's final approval.
- As soon as the publication appears in print and in electronic forms on the Internet there is no possibility to change the content of the article.

Editor’s responsibilities
-The editor decides whether the paper fulfills all requirements i.e. formal and scientific and which articles submitted to the journal should be published.
-In making these decisions, the editor may be guided by the policies of the journal’s editorial board as well as by legal requirements regarding libel, copyright infringement, and plagiarism.
-The editor maintains the integrity of the academic record, precludes business needs from compromising intellectual and ethical standards, and is always willing to publish corrections, clarifications, retractions, and apologies when needed.
-The editor evaluates manuscripts for intellectual content without regard to race, gender, sexual orientation, religious belief, ethnic origin, citizenship, or political philosophy of the author(s).
-The editor does not disclose any information about a manuscript under consideration to anyone other than the author(s), reviewers and potential reviewers, and in some instances the editorial board members, as appropriate.

Reviewers' responsibilities
Any manuscripts received for review are treated as confidential documents. They must not be shown to or discussed with others except if authorized by the editor. Privileged information or ideas obtained through peer review is kept confidential and not used for personal advantage Any invited reviewer who feels unqualified to review the manuscript or knows that its timely review will be impossible should immediately notify the editor so that alternative reviewers can be contacted. Reviewers should identify relevant published work that has not been cited by the authors. Any statement that an observation, derivation, or argument had been previously reported should be accompanied by the relevant citation. A reviewer should also call to the editor's attention any substantial similarity or overlap between the manuscript under consideration and any other published data of which they have personal knowledge. Reviewers should not consider evaluating manuscripts in which they have conflicts of interest resulting from competitive, collaborative, or other relationships or connections with any of the authors, companies, or institutions connected to the submission. Reviews should be conducted objectively. Personal criticism of the author is unacceptable. Referees should express their views clearly with appropriate supporting arguments. All reviews must be carried out on a special form available in the Editorial System.

Ta strona wykorzystuje pliki 'cookies'. Więcej informacji