Applied sciences

Archives of Environmental Protection

Content

Archives of Environmental Protection | 2020 | vol. 46 | No 3 |

Download PDF Download RIS Download Bibtex

Abstract

Per- and polyfl uoroalkyl substances (PFASs) are human-invented chemicals that were created in the middle of the 20th century. They were synthesized for the fi rst time in 1949, and because of their exceptional surfactant properties, they have been widely used in many industrial applications and daily life products. The common use of PFASs resulted in their worldwide dissemination in natural environment. PFASs are reported to be ubiquitous in surface and drinking waters, but also may be present in soils, animals, milk and milk-products, plants, food. Contaminated drinking water and food are the most signifi cant exposure sources to these chemicals. Ingested PFASs are bio-accumulative and have adverse eff ect on health of humans as well as animal organisms. This paper reviews the most signifi cant information on the origin, properties, distribution, environmental fate, human exposure, health eff ects, and the environmental regulations on PFASs and summarizes the latest advances in the development of novel methods for the eff ective removal of these chemicals from the aqueous environment. Recognized (reverse osmosis, adsorption on activated carbon) and most promising developing removal methods such as adsorption on biomaterials (plant proteins, chitosan beds), mineral adsorbents (LDHs, hydrotalcite), ionexchange resins, and photocatalytic degradation have been emphasized.

Go to article

Authors and Affiliations

Mariusz Grabda
Sylwia Oleszek
Michiaki Matsumoto
Download PDF Download RIS Download Bibtex

Abstract

The removal of nitrates from aqueous solutions is cumbersome because of their high solubility in water. The use of zero-valent iron (ZVI) for the reduction of nitrates is the chemical process and it is an alternative method to the biological ones. The aim of the present study was to evaluate the eff ectiveness of nitrates removal from water solution by using the ZVI process. The process was coupled with the removal of COD, phosphates and turbidity by using by-products of nitrates reduction. Batch tests were performed to evaluate the eff ectiveness of ZVI in the removal of nitrates from aqueous solutions. The eff ectiveness of nitrates removal was analyzed after 5, 10, 20, 30 and 60 min. and compared to the initial concentration of pollutants. Simultaneously analysis of ammonium nitrogen and nitrites was controlled to identify products of nitrates reduction under various pH. The removal of COD, phosphates and turbidity was also performed in batch tests. The eff ectiveness of the emoval by using three types of chemicals was compared – PIX, FeSO4, and waste Fe2+/Fe3+ from the ZVI process. The results obtained in the study indicate that ZVI can be eff ectively used in the treatment of water polluted with nitrates and the by-products of the process could be further applied in the removal of COD, phosphates and turbidity. Based on the results the method should be advised as a promising alternative to the technologies used nowadays under technical scale as a technology that fits with a circular economy.

Go to article

Authors and Affiliations

Ewa Wiśniowska
Maria Włodarczyk-Makuła
Download PDF Download RIS Download Bibtex

Abstract

The aim of the work was to analyze the effi ciency and reliability of pollutants removal (total suspended solids – TSS, BOD5, COD) in a collective wastewater treatment plant with activated sludge and hydroponic lagoon during its long term operation. The tested object was designed to treat wastewater in flowing through the sewerage system and wastewater delivered by the septic truck. The projected capacity of the treatment plant was 1200 m3∙d-1. The technological system for wastewater treatment consisted of a mechanical part, a flowing biological reactor working according to the BARDENPHO process, a secondary settling tank and a hydroponic lagoon. The efficiency and reliability of pollutants removal in the analyzed treatment plant were assessed on the basis of the data concerning influent and effluent wastewater collected during the years 2011–2018. On the basis of the measurements results, there were determined characteristic values of the selected pollution indicators in wastewater and the average efficiency of pollutants removal. The technological reliability of the wastewater treatment plant was assessed for the basic pollution parameters (BOD5, COD, TSS) in accordance with the elements of the Weibull’s reliability theory, with regard to normative values of the indicators specified in the Regulation of the Minister of Environment. The analysis was carried out using the Statistica 13.1 software. It was proved that in the wastewater treatment plant with an activated sludge and hydroponic lagoon the level of organic pollutants removal expressed by BOD5 was on average 99.5%, COD – 98.1% and TSS – 99.4%. The technological reliability of the system was 100% in terms of the removal of pollutants from the basic group, which means that during the long term operation (8 years) it provided failure-free operation and guaranteed the fulfillment of the requirements that can be found in the Polish law regulations concerning the analyzed pollutants.

Go to article

Authors and Affiliations

Karolina Jóźwiakowska
Michał Marzec
Download PDF Download RIS Download Bibtex

Abstract

This paper discusses design, evaluation, and application for the use of swirl/vortex technologies as liquid purifi cation system. A study was performed using modifi ed swirl sedimentation tanks. The vortex separators containing baffle have been studied under laboratory conditions at hydraulic load from 21 to 64 [m3/(m2·h)]. Analyzed disperser phases were municipal water and glycerol solutions of varying concentration. The pressure drop and the efficiency of purification of liquid stream were analyzed. The suspended particles of different diameters were successfully removed from liquid with the application of swirl chambers of proposed constructions. It was found that damming of liquid in the tank increases alongside liquid stream at the inlet and depends on the tank construction. The efficiency of the sedimentation tanks increases alongside the diameters of solid particles and decrease in the liquid flow rate. The best construction proved to be the one where baffle is located in the middle of in- and outlet due to the highest efficiency of the purification liquid stream for solid particles of the smallest diameter. The proposed solution is an alternative to the constructions of heavy fraction separators.

Go to article

Authors and Affiliations

Małgorzata Markowska
Marek Ochowiak
Sylwia Włodarczak
Magdalena Matuszak
Download PDF Download RIS Download Bibtex

Abstract

An increasing number of municipal sewage treatment plants in Poland, desirable from an environmental perspective, raises the problem of managing the growing volume of sewage sludge. The thermal treatment of municipal sewage sludge (TTMSS) method, by greatly reducing the waste volume, increases the heavy metal concentration in fly ash (primary, end product of the treatment process), which may constitute a risk factor when attempting to utilize them economically. The research paper concentrates on determining the TTMSS fly ash heavy metal leaching level. For this purpose, ash samples were subjected to leaching with the batch and percolation tests, and the heavy metal content in eluates was determined by the FAAS method. The obtained results served as a base to determine the level of heavy metal immobilization in the ash, the element release mechanism (percolation test), and the impact of the L/S (liquid to solid) ratio and pH on the heavy metal leaching intensity (percolation test). The conducted research indicated high immobilization of heavy metals in TTMSS fly ash, regardless of the applied study method, which corresponds to the results of other researchers. Lead was the most intensively eluted metal.

Go to article

Authors and Affiliations

Łukasz Szarek
Download PDF Download RIS Download Bibtex

Abstract

Biogas plants processing municipal waste are very important investments from the point of view of waste management and also the sustainable development of urban infrastructures. They may also have a potentially negative impact on the environment in the form of odour emission. Olfactometry is the main method for odour impact assessment. Field olfactometry allows for performing a wide range of tests, the results of which are practically instantaneous. The purpose of this work is to provide a tool for assessing the odour impacts of municipal management facilities, including biogas plants processing municipal waste and evaluating the correctness of processes carried out in these plants, namely the method of field olfactometry. In order to compare obtained olfactometric results with the concentration of chemical compounds, chromatographic tests were also carried out using the Photovac Voyager portable chromatograph (hydrogen sulphide – H2S and dimethyl sulphide – (CH3)2S. The results of the odour concentration tests are in line with the results of odorant concentration tests and indicate that cod is strongly related to the concentration of hydrogen sulphide. Thanks to this method, it is possible to find a relationship between odour nuisance, technological processes used in the plant and the type of treated waste.

Go to article

Authors and Affiliations

Marta Wiśniewska
Andrzej Kulig
Krystyna Lelicińska-Serafin
Download PDF Download RIS Download Bibtex

Abstract

The aim of this study was the application of the geo-accumulation index and geostatistical methods to the assessment of forest soil contamination with heavy metals in the Babia Góra National Park (BGNP). For the study, 59 sample plots were selected to reflect all soil units (soil subtypes) in the studied area and take into account various forms of terrain. The content of organic carbon and total nitrogen, pH, hydrolytic acidity, the base cations and heavy metals content were determined in the soil samples. The geo-accumulation index (Igeo) was calculated, enabling estimation of the degree of soil pollution. The tested soils are characterized by strong contamination with heavy metals, especially with lead. The concentration of heavy metals in the surface horizons of the tested soils exceeds allowable concentration. The content of heavy metals was related to the content of soil organic matter, soil acidity and altitude. Higher altitudes are dominated by coniferous tree stands, which are accompanied by acidic, poorly decomposed organic horizons. Our study has confirmed the impact of pollutants transported from industrial areas on the amount of heavy metals in soils of the BGNP.

Go to article

Authors and Affiliations

Stanisław Łyszczarz
Ewa Błońska
Jarosław Lasota
Download PDF Download RIS Download Bibtex

Abstract

The pesticide persistence, in particular in soils, often significantly exceeding the declarations of their manufacturers is surprising. There are many publications devoted to the explanation of this phenomenon in the field literature, but the diverse research methodologies used may lead to the ambiguous conclusions. On the basis of the collected literature, the attempt was made to systematize the available information on the interactions of commonly used groups of pesticides with individual soil components. The complex mechanisms of interactions between pesticides and soil based on van der Waals forces, ionic and covalent bonding, ligand exchange and charge transfer complexes formation were demonstrated. It was also proved that the nature of interactions is strictly dependent on the structure of the pesticide molecule. The conclusion of the review may contribute to the choice of plant protection products that, in addition to their effectiveness, are as little ballast for the environment as possible.

Go to article

Authors and Affiliations

Hanna Barchańska
Marianna Czaplicka
Joanna Kyzioł-Komosińska
Download PDF Download RIS Download Bibtex

Abstract

The purpose of this study was to validate the applicability of specialized microbial consortium for the degradation of lipids in wastewater. An experimental model of the process is proposed that enables prediction of the required batch length. This model can be used for supervision of the process and to control cycles of the batch reactor. The study involved 4 reactors with microbial consortium obtained by inoculation from a commercially available biopreparate. Each reactor was fed a different load of lipid containing substrate. The biodiversity, settling characteristics and COD reductions were measured. The biodiversity of the microbial consortium changed within a range of ±15% depending on lipids concentration, as shown by the Shannon index and increasing amount of β-proteobacteria. Higher concentrations of lipids increased the biodiversity suggesting higher growth of microorganisms capable of utilizing lipids as energy and carbon source by producing lipid hydrolyzing enzymes. High lipid concentrations degrade the settling capabilities of the biomass. Higher lipid concentrations (0.5–2.0 [g/l]) increase the final COD (1445–2160 [mg O2/l]). The time necessary for substrate degradation changes with the initial concentration and can be predicted using the proposed model. The study showed that specialized microbial consortium is capable of reducing the lipids containing substrate and maintains its biodiversity suggesting that utilization of such consortia in multiple cycles of a batch reactor is possible. Future research should concentrate on assessing the biodiversity and effectiveness of substrate reduction after an increased number of batch reactor cycles.

Go to article

Authors and Affiliations

Witold Nocoń
Anna Węgrzyn
Mieczysław Metzger
Download PDF Download RIS Download Bibtex

Abstract

Cytostatic drugs have become one of the greatest environmental hazards. They exhibit toxic, carcinogenic, mutagenic and teratogenic effects on flora and fauna, including people. They are poorly eliminated in conventional wastewater treatment plants and their mixtures could possess higher ecotoxicity than individual drugs. Fungi are organisms with enormous potential for biodegradation of a variety of toxic chemical pollutants. The aim of this work was to estimate tolerance of five fungal strains to selected anticancer drugs, which will be useful to determine the potential for their possible use in cytostatics removal and may be significant in the context of wastewater treatment application. Test was conducted on Fomes fomentarius (CB13), Hypholoma fasciculare (CB15), Phyllotopsis nidulans (CB14), Pleurotus ostreatus (BWPH) and Trametes versicolor (CB8) and the chosen drugs were bleomycin and vincristine. Their ability to grow in the presence of selected cytostatics was evaluated in cultures conducted on two solid media which differed in the richness of nutrient compounds. Fungal strains tolerance was expressed as a half maximal effective concentration. Results showed that fungi display better tolerance to high cytostatics’ concentrations in the medium rich in carbon source. Regardless of the medium used, the differences in growth ability were lower for bleomycin (the tolerance was higher). The greatest tolerance for bleomycin was shown by Pleurotus ostreatus. Results suggest that more efficient elimination of bleomycin would be possible to obtain, strain BWPH seems to be the best fungal candidate for this drug degradation assay and, probably, in wastewater treatment application tests in a longer perspective.

Go to article

Authors and Affiliations

Marcelina Jureczko
Wioletta Przystaś
Monika Urbaniak
Anna Banach-Wiśniewska
Łukasz Stępień

Editorial office

Editors

Editor-in-Chief
Czesława Rosik-Dulewska

Editorial Advisory Board
Michał Bodzek
Katarzyna Juda-Rezler
Korneliusz Miksch

Assistant Editor
 Jerzy Szdzuj

Editorial Board:

President:
Lucjan Pawłowski

Members:
Brian A. Bolto (Australia)
Hubert Bril (France)
Bart Van der Bruggen (Belgium)
Zhihong Cao (China)
Pen-Chi Chiang (R.O.C.)
Wolfgang Frenzel (Germany)
Reinhard F. Hüttl (Germany)
Piotr Kowalik (Poland)
Joanna Kyzioł-Komosińska (Poland)
Rajmund Michalski (Poland)
Anuska Mosquera Corral (Spain)
Takashi Nakamura (Japan)
Józef M. Pacyna (Norway)
Wim H. Rulkens (The Nederlands)
Corrado Sarzanini (Italy)
Hans Martin Seip (Norway)
Jan Siuta (Poland)
Jerzy Sobota (Poland)
Joanna Surmacz-Górska (Poland)
Jadwiga Szczepańska (Poland)
Christopher G. Uchrin (USA)
Tomasz Winnicki (Poland)
Xiaoping Zhu (USA)
Jerzy Zwoździak (Poland) 

Contact

Institute of Environmental Engineering of the Polish Academy of Sciences
ul. M. Skłodowskiej-Curie 34, 41-819 Zabrze, Poland
Tel.: +48-32-271 64 81      Fax: +48-32-271 74 70
e-mail: aep@ipis.zabrze.pl

Instructions for authors

Instructions for Authors

Archives of Environmental Protection is a quarterly published jointly by the Institute of Environmental Engineering of the Polish Academy of Sciences and the Committee of Environmental Engineering of the Polish Academy of Sciences. Thanks to the cooperation with outstanding scientists from all over the world we are able to provide our readers with carefully selected, most interesting and most valuable texts, presenting the latest state of research in the field of engineering and environmental protection.

Scope

The Journal principally accepts for publication original research papers covering such topics as:

- Air quality, air pollution prevention and treatment;

- Wastewater treatment and utilization;

- Waste management;

- Hydrology and water quality, water treatment;

- Soil protection and remediation;

- Transformations and transport of organic/inorganic pollutants in the environment;

- Measurement techniques used in environmental engineering and monitoring;

- Other topics directly related to environmental engineering and environment protection.

The Journal accepts also authoritative and critical reviews of the current state of knowledge in the topic directly relating to the environment protection.

If unsure whether the article is within the scope of the Journal, please send an abstract via e-mail to: aep@ipis.zabrze.pl

Preparation of the manuscript

The following are the requirements for manuscripts submitted for publication:

• The manuscript (with illustrations, tables, abstract and references) should not exceed 20 pages. In case the manuscript exceeds the required number of pages, we suggest contacting the Editor.

• The manuscript should be written in English.

• The manuscript ought to be submitted in doc or docx format in three files:

– text.doc – file containing the entire text, without title, keywords, authors names and affiliations, and without tables and figures;

– figures.doc – file containing illustrations with legends;

– tables.doc – file containing tables with legends;

• The text should be prepared in A4 format, 2.5 cm margins, 1.5 spaced, preferable using Time New Roman font with no less than 12 point. The text should be divided into sections and subsections according to general rules of manuscript editing. The proposed place of tables and figures insertion should be marked in the text.

• Legends in the figures should be concise and legible, using a proper font size so as to maintain their legibility after decreasing the font size. Please avoid using descriptions in figures, these should be used in legends or in the text of the article. Figures should be placed without the box. Legends should be placed under the figure and also without box.

• Tables should always be divided into columns. When there are many results presented in the table it should also be divided into lines.

• References should be cited in the text of an article by providing the name and publication year in brackets, e.g. (Nowak 2019). When a cited paper has two authors, both surnames connected with the word “and” should be provided, e.g. (Nowak and Kowalski 2019). When a cited paper has more than one author, surname of its first author, abbreviation ‘et al.’ and publication year should be provided, e.g. (Kowalski et al. 2019). When there are more than two publications cited in one place they should be divided with coma, e.g. (Kowalski et al. 2019, Nowak 2019, Nowak and Kowalski 2019). Internet sources should be cited like other texts - providing the name and publication year in brackets.

• References should be listed at the end of the article ordered alphabetically by surname of the first author. References should be made according to the following rules:

1. Journal:

Surnames and initials. (publication year). Title of the article, Journal Name, volume, number, pages, DOI.

For example:

Nowak, S.W., Smith, A.J. & Taylor, K.T. (2019). Title of the article, Archives of Environmental Protection, 10, 2, pp. 93–98, DOI: 10.24425/aep.2019.126330.

2. Book:

Surnames and initials. (publication year). Title, Publisher, Place and publishing year.

For example:

Kraszewski, J. & Kinecki, K. (2019). Title of book, Work & Sudies, Zabrze 2019.

3. Edited book:

Surnames and initials of text authors. (publishing year). Title of cited chapter, in: Title of the book, Surnames and initials of editor(s). (Ed.)/(Eds.). Publisher, Place, pages.

For example:

Reynor, J. & Taylor, K.T. (2019). Title of chapter, in: Title of the cited book, Kaźmierski, I. & Jasiński, C. (Eds.). Work & Studies, Zabrze, pp. 145–189.

4. Internet sources:

Surnames and initials or the name of the institution which published the text. (publication year). Title, (website address (accessed on)).

For example:

Kowalski, M. (2018). Title, (http://www.krakow.pios.gov.pl/publikacje/2009/ (03.12.2018)).

5. Patents:

Orszulik, E. (2009). Palenisko fluidalne, Patent polski: nr PL20070383311 20070910 z 16 marca 2009.

Smith, I.M. (1988). U.S. Patent No. 123,445. Washington, D.C.: U.S. Patent and Trademark Office.

6. Materials published in language other than English:

Titles of cited materials should be translated into English. Information of the language the materials were published in should be provided at the end.

For example:

Nowak, S.W. & Taylor, K.T. (2019). Title of article, Journal Name, 10, 2, pp. 93–98, DOI: 10.24425/aep.2019.126330. (in Polish)

Not more than 30 references should be cited in the original research paper.

Submission of the manuscript

By submitting the manuscript Author(s) warrant(s) that the article has not been previously published and is not under consideration by another journal. Authors claim responsibility and liability for the submitted article. The manuscripts should be submitted on-line using the Editorial System available at http://www.editorialsystem.com/aep. Authors are asked to propose at least 4 potential reviewers, including 2 from Poland, together with their e-mail addresses. The journal does not have article processing charges (APCs) nor article submission charges.

Review Process

All the submitted articles are assessed by the Editorial Board. If positively assessed by at least two editors, Editor in Chief, along with department editors selects two independent reviewers from recognized authorities in the discipline. Reviewers receive a text of the article (without personal data of Authors) and review forms applicable in the journal. In justified cases, reviewers receive additional questions regarding the article. Review process usually lasts from 1 to 4 months.

After completion of the review process Authors are informed of the results and - if both reviews are positive - asked to correct the text according to reviewers’ comments. Next, the revised work is verified by the editorial staff for factual and editorial content.

Acceptance of the manuscript

The manuscript is accepted for publication on grounds of the opinions of independent reviewers and approval of Editorial Board. Authors are informed about the decision and also asked to pay processing charges and to send completed declaration of the transfer of copyright to the editorial office.

Proofreading and Author Correction

All articles published in the Archives of Environmental Protection go through professional proofreading process. If there are too many language errors that prevent understanding of the text, the article is sent back to Authors with a request to correct the indicated fragments or - in extreme cases – to re-translate the text.

After proofreading the manuscript is prepared for publishing. The final stage of the publishing process is Author correction. Authors receive a page proof copy of the article with a request to make final corrections.

Article publication charges

The publication fee of an article in the Journal is:

• 20 EUR/80 zł per page (black and white or in gray scale),

• 30 EUR/120 zł per page (color).

Payments in Polish zlotys

Bank BGK

Account no.: 20 1130 1091 0003 9111 7820 0001

Payments in Euros

Bank BGK

Account no.: 20 1130 1091 0003 9111 7820 0001

IBAN: PL 20 1130 1091 0003 9111 7820 0001

SWIFT: GOSKPLPW

Authors are kindly requested to inform the editorial office of making payment for the publication, as well as to send all necessary data for issuing an invoice.

Open Access policy

Archives of Environmental Protection jest czasopismem wydawanym w wolnym dostępie na licencji CC BY-NC-SA 4.0.

Archives of Environmental Protection is an open access journal with all content available with no charge in full text version. The journal content is available under the licencse CC BY-NC-SA 4.

Additional information

Abstracting & Indexing

Archives of Environmental Protection is covered by the following services:

AGRICOLA (National Agricultural Library)

AGRIS

Arianta

Baidu Scholar

BazTech

CABI (over 50 subsections)

Chemical Abstracts Service (CAS) - CAplus

Chemical Abstracts Service (CAS) - SciFinder

CNKI Scholar (China National Knowledge Infrastructure)

CNPIEC

Dimensions

DOAJ (Directory of Open Access Journals)

EBSCO (relevant databases)

EBSCO Discovery Service

Engineering Village

FSTA - Food Science & Technology Abstracts

Genamics JournalSeek

GeoArchive

GeoRef

Google Scholar

Index Copernicus

Inspec

Japan Science and Technology Agency (JST)

J-Gate

Journal Citation Reports/Science Edition

JournalTOCs

KESLI-NDSL (Korean National Discovery for Science Leaders)

Microsoft Academic

Naviga (Softweco)

Primo Central (ExLibris)

ProQuest (relevant databases)

Publons

ReadCube

Reaxys

SCOPUS

Sherpa/RoMEO

Summon (Serials Solutions/ProQuest)

TDNet

TEMA Technik und Management

Ulrich's Periodicals Directory/ulrichsweb

WanFang Data

Web of Science - Biological Abstracts

Web of Science - BIOSIS Previews

Web of Science - Science Citation Index Expanded

WorldCat (OCLC)

This page uses 'cookies'. Learn more