Applied sciences

Archives of Environmental Protection

Content

Archives of Environmental Protection | 2011 | No 1 |

Abstract

The prevalence of heavy metals in wastewater is the cause of death of numerous organisms which take part in biological treatment of wastewater, that is why the aim of the study has been to asses the influence of cadmium and copper ions upon the microfauna of activated sludge. 5, 10, 50, and 100 mg/l of Cd2+ and Cu2+ were added into the samples of activated sludge and then, after 24 hours, the microscopic observations of activated sludge microfauna were carried out, and all changes concerning the amount of microfauna, functional groups, and species composition were determined. The results obtained allowed to find a high level of toxicity of Cd2+ and Cu2+ ions to activated sludge microfauna, which resulted in the changes in the value of the Sludge Biotic Index and classes of sludge, survivability of microfauna, and reduction in the number of taxonomic units. It was observed that Cu2+ ions are more toxic to activated sludge microfauna than Cd2+ ions in identical doses. Organisms sensitive to Cd2+ and Cu2+ ions have been found to be testate amoebae, Aspidisca sp. and Epistylis sp., as well as organisms relatively sensitive to tested metals, which turned out to be ciliates of Opercularia and Vorticella convalaria genera.

Go to article

Abstract

In this paper, we present results indicating ozone effect on visible plants response as well as on other parameters, such as dry weight, chlorophyll concentration, cell membrane stability and salicylic acid content in bioindicator plants. Ozone-resistant and -sensitive clones of white clover (Trifolium repens L. cv. "Regal") were used in the investigations. The experiment was carried out in ambient air conditions of the Wielkopolska province (Poland) in 2005 growing season. The exposure led to changes in the level of plant response parameters that might be used as potential biomarkers of oxidative stress triggered by tropospheric ozone in ambient air conditions.

Go to article

Abstract

Aluminium is one of the main soil components. Usually it is a part of non-toxic aluminosilicates but in low pH values its mobility is higher and - especially in monomeric form is toxic for plants. Selenium is an essential element necessary for animals and humans. Its compounds have anticancer and anti mutagenic character. However, its high uptake from environment, e.g. with food or water could lead to various diseases including embryonic deformity, decreased hatchling survival and death to aquatic organisms. Soil contamination with aluminium leads to disturbances in plant growth as a result of low calcium and magnesium uptake. High concentrations of selenium lead to its accumulation in plant tissues what is the beginning of selenium fate in food chain. In this work a cultivated layer of soils located near five industry plants in the town of Opole (southern Poland) were investigated. Aluminium and selenium content in soils is an effect of two factors: its natural occurrence in rocks (natural content) and human activity - especially chemicals from agriculture, industrial and transport pollutants. Aluminium was determined in the range of 3440 to 14804 mg/kg d.w. Obtained results of selenium concentration covered the range from 27.1 to 958.1 μg/kg d.w. These results are slightly higher than concentrations noted in natural or non-polluted soils, but still low. These amounts of selenium could have more positive than negative effects. Aluminium and selenium concentrations were discussed concurrently with base soils parameters, such as pH, EC and granulometric fractions composition.

Go to article

Abstract

A prospective brown coal mine "Legnica" is to be responsible for forming a depression funnel which can cover "Ścinawskie Swamps" where 26 herbaceous plant species forming 7 communities were recognized, among others: Phragmitetum australis, Caricetum gracilis and Acoretum calami. Investigated wetland characterizes changeable level of water which brings about the presence of as many as 30.77% species connected with Molinio-Arrhenatheretea class. The half of taxa belongs to synantropic species, while 50% are non - synantropic ones. The area of "Ścinawskie Swamps" can be assessed as featuring moderately high nature values and, therefore worth further protection as ecological areas.

Go to article

Abstract

The paper presents microbiological characteristic of sewage sludge composted in controlled conditions together with biowastes (wheat, maize and rapeseed straw, sawdust and refined glycerol). An experiment was carried out in which the material was mixed at appropriate weight proportions and then placed in bioreactor chambers of constant air flow (4 lźmin-1). The performed composting process aimed at determining the developmental dynamics of heterotrophic bacteria, molds, actinomycetes as well as bacteria from Salmonella genus and Enterobacteriaceae family. Microbiological analyses were performed on selective substrates using Koch's plate method. Moreover, using the floatation method, the presence of live eggs of ATT (Ascaris spp., Trichuris spp., Toxocara spp.) intestinal parasites was assessed and levels of dehydrogenase activity were determined using 1% triphenylotetrazole chloride as a substrate. It was concluded, on the basis of the obtained research results, that the composting process reduced bacterial counts of heterotrophic bacteria, molds and the activity of dehydrogenases activity in all experimental treatments. On the other hand, no reduction was observed in quantities of actinomycetes in the composted materials whose changes in numbers were found to correlate positively most strongly with levels of dehydrogenases activity. In addition, it was found that changes in numbers of the analysed groups of microorganisms depended, primarily, on the pH value and concentrations of ammonia released from the composted materials. Furthermore, the obtained research results also revealed that the sewage sludge used in the experiment did not contain Salmonella spp. bacteria and live eggs of ATT intestinal parasites, and that the composting process reduced completely numbers of bacteria from the Enterobacteriaceae family in all compost treatments. The obtained composts fulfilled all sanitary standards complying with the requirements issued by the Minister of Agriculture and Rural Development (2008) as well as with the EU regulation (EC) No. 185/2007 from February 2007 changing EEC regulations No. 809/2003 and No. 810/2003 connected with the extension of the period of transitional requirements for composting and biogas plants as provided by the EU regulation No. 1774/2002 of the European Parliament and Council.

Go to article

Abstract

The paper presents results of floristic investigation conducted within the territory of post-industrial spoil heaps connected with zinc and lead products manufacturing. The flora of specific technogenic habitats was analyzed with regard to geographical-historical groups and syntaxonomic classification. For each species, the following characteristics were determined: a life form according to the classification of Raunkiaer, means of seed spreading and types of mycorrhiza for each species based on the literature. On the two heaps, a total of 257 species of vascular plants belonging to 59 families were found. Only 92 species occurred on both sites, which is 36% of all plants recorded. The most numerous families are: Asteraceae (45 species) and Poaceae (28 species). Apophytes dominate in the flora of spoil heaps (70.9%). Hemicryptophytes are the most numerous group and therophytes are also abundant. Ruderal (belonging to Artemisietea vulgaris and Stelarietea mediae) and meadow species (belonging to Molino-Arrhenatheretea) dominate on both post-industrial dumps. Xerothermal species (belonging to Festuco-Brometea) are also fairly numerous (6.7%). Their presence is related to the specific habitat conditions. The anemochoric species dominate in the flora of dumps. The high proportion of mycorrhizal plants was recorded. Finally, reclamation interventions which were carried out on the H2 spoil heap are discussed.

Go to article

Abstract

In the present paper we show results of our research on the contents of selected heavy metals in the surface and subsurface water layers of the estuarine lake Gardno. Obtained results show that there are substantial differences between concentrations of lead, copper and zinc in surface microlayer and subsurface waters. We observed that the surface microlayer is capable of accumulating much higher amounts of these metals than the subsurface waters. Analysis of seasonal changes in heavy metal concentrations in surface microlayers and subsurface waters shows some periodicity of these changes.

Go to article

Abstract

Ammonia-oxidizing bacteria communities were evaluated in a completely mixed, laboratory scale membrane reactor (MBR) working under anoxic conditions for 5 months. The microorganisms in activated sludge were fed a synthetic medium containing 66-150 mg NH4 +-N/l. The age of the activated sludge in MBR was 50 days and the hydraulic retention time (HRT) was 3.3 days. The estimation of the diversity and complexity of the AOB community together with the identification of the dominant bacteria in the activated sludge under anoxic conditions were performed using denaturing gradient gel electrophoresis (DGGE) and DNA sequencing. Molecular analysis of the microbial community carried out with two microbial molecular markers, 16S rRNA gene and amoA gene, suggested that nitrification was led by a Nitrosomonas-like species. In the biocenosis of the investigated bioreactor, oxygen was the crucial selective parameter. The results obtained in this work showed that amoA gene research is more suitable to study the stability and effectiveness of ammonia oxidation. This information emphasizes the necessity of the usage of molecular markers based on functional genes instead of ribosomal ones in order to present the actual state of the process performed in bioreactors. It was also stated that Nitrosomonas -like bacteria are able to perform nitritation even in anoxic environment, that is probably the reason why these bacteria are the most common AOB in different bioreactors.

Go to article

Abstract

The aim of the work was to estimate the influence of plants mycorrhizas on the number of hydrocarbons degrading bacteria, saprophytic bacteria and molds fungi during the remediation of the soil samples contaminated with used engine oil. The investigation were carried out in laboratory conditions. Nine modifications of the soil substrate were prepared and divided into three groups: the first one - without used engine oil; the second one - with 10% (w/w) of used engine oil; the third one - with 25% (w/w) of used oil. In each group one sample was sown with ribwort, one was inoculated with living spores of mycorrhizal fungi and sown with ribwort, and the third one was left without plants and mycorrhizal fungi. The sample of the uncontaminated soil was the control. The investigation showed a significant effect of used engine oil, the presence of ribwort and mycorrhizal fungi on the number of soil microorganisms. The increase of the number of hydrocarbons degrading bacteria, in respect to the control sample was observed in the used engine oil contaminated samples. The seeding of soil samples with plants and additional inoculation with spores of mycorrhizal fungi stimulated the increase of the number of microorganisms in the all studied groups.

Go to article

Abstract

This article presents test results for hydraulic conductivity and porosity structure of hardening slurries prepared of Portland cement, betonite, water and fluidal ashes from the combustion of hard and brown coal. The slurries were exposed to persistent filtering action (180 days) of liquids chemically aggressive to cement binders, i.e. distilled water, 0.5% solution of nitric acid, 1% solution of sodium sulphate, 1% solution of magnesium nitrate and 1% solution of ammonium nitrate. Samples exposed to filtration of tap water constituted the reference base. The research was into relations between hydraulic conductivity and pore structure parameters in slurries, as well as into the influence of the type of aggressive medium on leak tightness of slurries (their porosity and hydraulic conductivity).

Go to article

Editorial office

Editors

Editor-in-Chief
Czesława Rosik-Dulewska

Editorial Advisory Board
Michał Bodzek
Katarzyna Juda-Rezler
Korneliusz Miksch

Assistant Editor
Katarzyna Panz

 

Editorial Board:

President:
Lucjan Pawłowski

Members:
Brian A. Bolto (Australia)
Hubert Bril (France)
Bart Van der Bruggen (Belgium)
Zhihong Cao (China)
Pen-Chi Chiang (R.O.C.)
Wolfgang Frenzel (Germany)
Reinhard F. Hüttl (Germany)
Piotr Kowalik (Poland)
Joanna Kyzioł-Komosińska (Poland)
Rajmund Michalski (Poland)
Anuska Mosquera Corral (Spain)
Takashi Nakamura (Japan)
Józef M. Pacyna (Norway)
Wim H. Rulkens (The Nederlands)
Corrado Sarzanini (Italy)
Hans Martin Seip (Norway)
Jan Siuta (Poland)
Jerzy Sobota (Poland)
Joanna Surmacz-Górska (Poland)
Jadwiga Szczepańska (Poland)
Christopher G. Uchrin (USA)
Tomasz Winnicki (Poland)
Xiaoping Zhu (USA)
Jerzy Zwoździak (Poland) 

Contact

Institute of Environmental Engineering of the Polish Academy of Sciences
ul.
M. Skłodowskiej-Curie 34, 41-819 Zabrze, Poland
Tel.: +48-32-271 64 81      Fax: +48-32-271 74 70
e-mail:
aep@ipis.zabrze.pl, katarzyna.panz@ipis.zabrze.pl

Instructions for authors

Instructions for Authors

Archives of Environmental Protection is a quarterly published jointly by the Institute of Environmental Engineering of the Polish Academy of Sciences and the Committee of Environmental Engineering of the Polish Academy of Sciences. Thanks to the cooperation with outstanding scientists from all over the world we are able to provide our readers with carefully selected, most interesting and most valuable texts, presenting the latest state of research in the field of engineering and environmental protection.

Scope

The Journal principally accepts for publication original research papers covering such topics as:

  • Air quality, air pollution prevention and treatment;
  • Wastewater treatment and utilization;
  • Soil protection and remediation;
  • Hydrology and water quality, water treatment;
  • Waste management;
  • Ecosystem restoration, toxicology and sustainability;
  • Transformations and transport of organic pollutants in the environment;
  • Transformations and transport of inorganic pollutants in the environment;
  • Measurement techniques used in environmental engineering and monitoring;
  • Other topics directly related to environmental engineering and environment protection.

The Journal accepts also authoritative and critical reviews of the current state of knowledge in the topic directly relating to the environment protection.
If unsure whether the article is within the scope of the Journal, please send an abstract via email to: aep@ipis.zabrze.pl or katarzyna.panz@ipis.zabrze.pl

Preparation of the manuscript

The following are the requirements for manuscripts submitted for publication:

  • The manuscript (with illustrations, tables, abstract and references) should not exceed 20 pages. In case the manuscript exceeds the required number of pages, we suggest contacting the Editor.
  • The manuscript should be written in English.
  • The manuscript ought to be submitted in doc or docx format in three files:
    • text.doc – file containing the entire text, without title, keywords, authors names and affiliations
    • figures.doc – file containing illustrations with legends o tables.doc – file containing tables with legends.
  • The text should be prepared in A4 format, 2.5 cm margins, 1.5 spaced, preferable using Time New Roman font with no less than 12 point. The text should be divided into sections and subsections according to general rules of manuscript editing. The proposed place of tables and figures insertion should be marked in the text.
  • Legends in the figures should be concise and legible, using a proper font size so as to maintain their legibility after decreasing the font size. Please avoid using descriptions in figures, these should be used in legends or in the text of the article. Figures should be placed without the box. Legends should be placed under the figure and also without box.
  • Tables should always be divided into columns. When there are many results presented in the table it should also be divided into lines.
  • References should be cited in the text of an article by providing the name and publication year in brackets, e.g. (Nowak 2004). When a cited paper has two authors, both surnames connected with the word “and” should be provided, e.g. (Nowak and Kowalski 2004). When a cited paper has more than one author, surname of its first author, abbreviation ‘et al.’ and publication year should be provided, e.g. (Kowalski et al. 2004). When there are more than two publications cited in one place they should be divided with coma, e.g. (Nowak 2004, Nowak and Kowalski 2004, Kowalski et al. 2004). Internet sources should be cited like other texts - providing the name and publication year in brackets.
  • References should be listed at the end of the article ordered alphabetically by surname of the first author. References should be made according to the following rules:
    • Journal:

Surnames and initials, publication year in brackets, title of the article, journal name in italics, volume, number, pages. For example:
Nowak, S.W., Smith, A.J. & Taylor, K.T. (2006). Title of article, Journal Name, 10, 2, pp. 93–98. o Book:
Surnames and initials, publication year in brackets, title in italics, publisher, place, publishing year. For example:
Kraszewski, J. & Kinecki, K. (2006). Title of book, Work & Sudies, Zabrze 2006.

    • Edited book:

Surnames and initials of text authors, publishing year in brackets, title of cited chapter, ‘in:’, title of the book in intalics, surnames and initials of editor(s), ‘(Ed)’/’(Eds)”, publisher and place, pages. For example:
Reynor,.J. & Taylor, K.T. (2006). Title of chapter, in: Title of the cited book, Kaźmierski, I. & Jasiński, C. (Eds.). Zabrze 2011.

    • Internet sources:
Surnames and initials or the name of the institution which published the text, publication year in brackets, title , website address, accessed on - in brackets. For example:
Kowalski, M. (2010). Title, (http://www.krakow.pios.gov.pl/publikacje/2009/(03.12.2014)) o Patents:
Orszulik, E. (2009) Palenisko fluidalne, Patent polski: nr PL20070383311 20070910 z 16 marca 2009.
Smith, I.M. (1988). U.S. Patent No. 123,445. Washington, D.C.: U.S. Patent and Trademark Office.
    • Materials published in language other than English:

Titles of cited materials should be translated into English. Information of the language the materials were published in should be provided at the end. For example:
Nowak, S.W. & Taylor, K.T. (2006). Title of article, Journal Name, 10, 2, pp. 93–98 (in
Polish)
Not more than 30 references should be cited in the original research paper.

Submission of the manuscript

By submitting the manuscript Author(s) warrant(s) that the article has not been previously published and is not under consideration by another journal. Authors claim responsibility and liability for the submitted article. The manuscripts should be submitted on-line using the Editorial System available at http://www.editorialsystem.com/aep. Authors are asked to propose at least 4 potential reviewers, including 2 from abroad, together with their e- mail addresses. The journal does not have article processing charges (APCs) nor article submission charges.

Review Process

All the submitted articles are assessed by the Editorial Board. If positively assessed by at least two editors, Editor in Chief, along with department editors selects two independent reviewers from recognized authorities in the discipline. Reviewers receive a text of the article (without personal data of Authors) and review forms applicable in the journal. In justified cases, reviewers receive additional questions regarding the article. Review process usually lasts from 1 to 4 months.
After completion of the review process Authors are informed of the results and - if both reviews are positive - asked to correct the text according to reviewers’ comments. Next, the revised work is verified by the editorial staff for factual and editorial content.

Acceptance of the manuscript

The manuscript is accepted for publication on grounds of the opinions of independent reviewers and approval of Editorial Board. Authors are informed about the decision and also asked to pay processing charges and to send completed declaration of the transfer of copyright to the editorial office.
Proofreading and Author Correction
All articles published in the Archives of Environmental Protection go through professional proofreading process. If there are too many language errors that prevent understanding of the text, the article is sent back to Authors with a request to correct the indicated fragments or - in extreme cases – to re-translate the text.
After proofreading the manuscript is prepared for publishing. The final stage of the publishing process is Author correction. Authors receive a page proof copy of the article with a request to make final corrections.

Article publication charges

The publication fee of an article in the Journal is:
•    20 EUR/80 zł per page (black and white or in gray scale)
•    30 EUR/120 zł per page (color)

Payments in Polish zlotys - Bank BGK Account no.: 20 1130 1091 0003 9111 7820 0001,
Payments in Euros - Bank BGK Account no.: 20 1130 1091 0003 9111 7820 0001, IBAN: PL 20 1130 1091 0003 9111 7820 0001, SWIFT: GOSKPLPW.

Authors are kindly requested to inform the editorial office of making payment for the publication, as well as to send all necessary data for issuing an invoice.

Open Access policy

Archives of Environmental Protection jest czasopismem wydawanym w wolnym dostępie na licencji CC BY-NC-SA 4.0.

Archives of Environmental Protection is an open access journal with all content available with no charge in full text version. The journal content is available under the licencse CC BY-NC-SA 4.

Additional information

Abstracting & Indexing

Archives of Environmental Protection is covered by the following services:

AGRICOLA (National Agricultural Library)

AGRIS

Arianta

Baidu Scholar

BazTech

CABI (over 50 subsections)

Chemical Abstracts Service (CAS) - CAplus

Chemical Abstracts Service (CAS) - SciFinder

CNKI Scholar (China National Knowledge Infrastructure)

CNPIEC

Dimensions

DOAJ (Directory of Open Access Journals)

EBSCO (relevant databases)

EBSCO Discovery Service

Engineering Village

FSTA - Food Science & Technology Abstracts

Genamics JournalSeek

GeoArchive

GeoRef

Google Scholar

Index Copernicus

Inspec

Japan Science and Technology Agency (JST)

J-Gate

Journal Citation Reports/Science Edition

JournalTOCs

KESLI-NDSL (Korean National Discovery for Science Leaders)

Microsoft Academic

Naviga (Softweco)

Primo Central (ExLibris)

ProQuest (relevant databases)

Publons

ReadCube

Reaxys

SCOPUS

Sherpa/RoMEO

Summon (Serials Solutions/ProQuest)

TDNet

TEMA Technik und Management

Ulrich's Periodicals Directory/ulrichsweb

WanFang Data

Web of Science - Biological Abstracts

Web of Science - BIOSIS Previews

Web of Science - Science Citation Index Expanded

WorldCat (OCLC)

This page uses 'cookies'. Learn more