Szczegóły

Tytuł artykułu

Effect of Peak-Aged Heat Treatment on Corrosion Behavior of the AA6063 Alloy Containing Al3Ti

Tytuł czasopisma

Archives of Metallurgy and Materials

Rocznik

2012

Numer

No 2 June

Autorzy publikacji

Wydział PAN

Nauki Techniczne

Wydawca

Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Commitee on Metallurgy of Polish Academy of Sciences

Data

2012

Identyfikator

ISSN 1733-3490

Referencje

Meyveci A. (2010), Pin-on-disc characterization of 2xxx and 6xxx aluminium alloys aged by precipitation age hardening, Journal of Alloys and Compounds, 491, 278, doi.org/10.1016/j.jallcom.2009.10.142 ; Weiwei W. (2006), Study of rare earth element effect on microstructures and mechanical properties of an Al-Cu-Mg-Si cast alloy, Rare Metals, 25, 129, doi.org/10.1016/S1001-0521(08)60066-2 ; Anasyida A. (2010), Dry sliding wear behaviour of Al-12Si-4Mg alloy with cerium addition, Materials and Design, 31, 365, doi.org/10.1016/j.matdes.2009.06.007 ; Bhattamishra A. (1997), Microstructural studies on the effect of Si and Cr on the intergranular corrosion in Al-Mg-Si alloys, Materials Design, 18, 25, doi.org/10.1016/S0261-3069(97)00027-7 ; Ramgopal T. (2002), Role of grain boundary precipitates and SDZ on the intergranular corrosion of aluminum alloy AA7150, Corrosion Science Section, 58, 687, doi.org/10.5006/1.3287699 ; Leblanc P. (2002), A study of corrosion and pitting initiation of AA2024-T3 using atomic force microscopy, Journal of Electrochemical Society, 149, 239, doi.org/10.1149/1.1471546 ; Zhang W. (2002), Localized corrosion growth kinetics in AA2024 alloys, Journal of Electrochemical Society, 149, 510, doi.org/10.1149/1.1513984 ; Baek Y. (2002), Electrochemical quartz crystal microbalance study of corrosion of phases in AA2024, Journal of Electrochemical Society, 150, 1, doi.org/10.1149/1.1524172 ; Zhang W. (2003), Transitions between pitting and intergranular corrosion in AA2024, Electrochımıca Acta, 48, 1193, doi.org/10.1016/S0013-4686(02)00828-9 ; Meng Q. (2004), Effect of Cu content on corrosion behavior of 7xxx series aluminum alloys, Journal of Electrochemical Society, 151, 271, doi.org/10.1149/1.1695385 ; Birbilis N. (2004), Corrosion damage accumulation on high strength aluminum alloys: Some advances in understanding the role of intermetallics, Corrosion and Materials, 29, 4. ; Birbilis N. (2004), Electrochemical characteristic of intermetallic phases in Al alloys, Journal of Electrochemical Society, 152, 140, doi.org/10.1149/1.1869984 ; Santos H. (2005), Corrosion performance of Al-Si-Cu hypereutectic alloys in a synthetic condensed automotive solution, Materials Research, 8, 155, doi.org/10.1590/S1516-14392005000200011 ; Svenningsen G. (2006), Effect of artifical aging on intergranular corrosion of extruded AlMgSi alloy with small Cu content, Corrosion Science, 48, 1528, doi.org/10.1016/j.corsci.2005.05.045 ; Huang T. (2006), Influence of grain structure on anisotropic localised corrosion kinetics of AA7xxx-T6 alloys, Corrosion Engineering Science and Technology, 41, 192, doi.org/10.1179/174327806X120739 ; Dobrzanski L. (2008), Microstructure and mechanical properties of the Al-Ti alloy with calcium addition, Journal of Achievements in Materials and Manufacturing Engineering, 26, 183. ; Gavgali M. (2003), The effect of artificial aging on wear properties of AA 6063 alloy, Materials Letters, 57, 3713, doi.org/10.1016/S0167-577X(03)00168-X ; Ahlatci H. (2010), Effect of Ti on the corrosion behaviour of in-situ Mg<sub>2</sub>Si particle reinforced Al-12Si-20Mg-XTi alloys, Materials Science Forum, 636, 511, doi.org/10.4028/www.scientific.net/MSF.636-637.511 ; Saheb N. (2001), Influence of Ti addition on wear properties of Al-Si eutectic alloys, Wear, 249, 656, doi.org/10.1016/S0043-1648(01)00687-1 ; Das K. (2009), A study of microstructure and tribological behaviour of Al-4.5% Cu /Al3Ti Composites, Materials Characterization, 60, 808, doi.org/10.1016/j.matchar.2009.01.012 ; Siddiqui R. (2000), Influence of aging parameters on the mechanical properties of 6063 aluminium alloy, Journal of Materials Processing Technology, 102, 234, doi.org/10.1016/S0924-0136(99)00476-8 ; Gavgali M. (2004), Improvements of fatigue behavior in 2014 Al alloy by solution heat treating and age-hardening, Wear, 236, 144. ; Kaçar H. (2003), The effect of precipitation-hardening conditions on wear behaviors at 2024 aluminium wrought alloy, Wear, 236, 144. ; Altenpohl D. (1998), Aluminum technology, applications and environment a profile of a modern metal. ; Ralston K. (2008), Corrosion inhibition of aluminum alloy 2024-T3 by aqueous vanadium species, Journal of The Electrochemical Society, 155, 350, doi.org/10.1149/1.2907772 ; Cavanaugh M. (2007), Investigating localized corrosion susceptibility arising from Sc containing intermetallic Al<sub>3</sub>Sc in high strength Al-alloys, Scripta Materialia, 56, 995, doi.org/10.1016/j.scriptamat.2007.01.036 ; Birbilis N. (2005), An experimental survey of electrochemical characteristics for intermetallic phases in aluminum alloys, Journal of the Electrochemical Society, 152, 140. ; Anik M. (2006), Effect of the eutectic phase mixture on the anodic behavior of alloy AZ91, Mater. Design, 27, 347, doi.org/10.1016/j.matdes.2004.11.016 ; Kiourtsidis G. (1998), Corrosion behaviour of squeze-cast silicon carbide -2024 composites in aerated 3.5% sodium chloride, Mater. Sci. Eng, A 248, 165, doi.org/10.1016/S0921-5093(98)00494-8

DOI

10.2478/v10172-012-0048-x

×