Critical Metrological Evaluation of Fuel Analyses by Measurement Uncertainty
Divisions of PAS
EURACHEM/CITAC Guide. (2000). <i>Quantifying Uncertainty in Analytical Measurement.</i> EURACHEM/CITAC: Hungary. ; Oliveira E. (2004), Evaluation of the uncertainty in measurement versus the limit of specification: qualitative and quantitative aspects of compliance, null. ; International Organization for Standardization (ISO). (1993). <i>Guide to the Expression of Uncertainty in Measurement.</i> ISO: Geneva. Switzerland. ; ABNT NBR 13992. (2008). Motor gasoline - Determinations of fuel anhydrous ethylic alcohol content. ; ABNT NBR 13993. (2002). Ethylic Alcohol - Determination of hydrocarbons content. ; ASTM D95 - 05. (2010). Standard Test Method for Water in Petroleum Products and Bituminous Materials by Distillation. ASTM American Society for Testing and Materials. ; ASTM D56 - 05. (2005). Standard Test Method for Flash Point by Tag Closed Cup Tester. ASTM American Society for Testing and Materials. ; ASTM D4294 (2010). Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence Spectrometry. ASTM American Society for Testing and Materials. ; ISO/IEC Guide 99-12:2007. (2007). <i>International Vocabulary of Metrology. Basic and General Concepts and Associated Terms.</i> International Organization for Standardization: Geneva. Switzerland. ; Analytical Methods Committee. (1995). Analyst, 120, 2303-2008. ; White R. (2011), The meaning of measurement in metrology, Accred. Qual. Assur, 16, 31, doi.org/10.1007/s00769-010-0698-1 ; ISO 3534-2:2006. (2006). Statistics - Vocabulary and Symbols - Part 2: Probability and general statistical terms. International Organization for Standardization: Geneva. Switzerland. ; Rösslein M. (2007), Repeatability: some aspects concerning the evaluation of the measurement uncertainty, Accred. Qual. Assur, 12, 425, doi.org/10.1007/s00769-007-0278-1 ; Willink R. (2009), The role of the sample standard deviation in the analysis of measurement data, Accred. Qual. Assur, 14, 353, doi.org/10.1007/s00769-009-0526-7 ; Zieba A. (2010), Effective number of observations and unbiased estimators of variance for autocorrelated data - an overview, Metrology and Measurement Systems, 17, 1, 3, doi.org/10.2478/v10178-010-0001-0 ; Lisowski M. (2009), Issues of volume resistivity measurement of flat dielectric specimens and evaluation on uncertainty of the measurement results by approximate method at confidence level of 0.95, Metrology and Measurement Systems, 16, 2, 233. ; Meyer V. (2010), Calibration, handling repeatability, and the Maximum Permissible Error of single-volume glass instruments, Accred. Qual. Assur, 15, 715, doi.org/10.1007/s00769-010-0693-6 ; Oliveira E. (2009), Methodology validation for evaluation of the uncertainty in the calibration curves better adjusted for second-degree polynomials, Quim. Nov, 32, 1655. ; Miller, J.N., Miller, J.C. (2005). <i>Statistics and chemometrics for analytical chemistry.</i> New York. ; Miller J. (1991), Basic statistical methods for Analytical Chemistry. Part 2. Calibration and regression methods, A review. Analyst, 116, 3, doi.org/10.1039/an9911600003 ; Vandeginste B. (1998), Handbook of Chemometrics and Qualimetrics. Part B. ; Jiménez-Chacón J. (2010), An approach to detection capabilities estimation of analytical procedures based on measurement uncertainty, Accred. Qual. Assur, 15, 19, doi.org/10.1007/s00769-009-0608-6 ; Chuí Q. (2007), Uncertainties related to linear calibration curves: a case study for flame atomic absorption spectrometry, J. Braz. Chem. Soc, 18, 424, doi.org/10.1590/S0103-50532007000200027 ; Catelani M. (2010), Uncertainty interval evaluation using the Chi-square and Fisher distributions in the measurement process, Metrology and Measurement Systems, 17, 2, 195, doi.org/10.2478/v10178-010-0017-5 ; Doz M. (2004), Water Tolerance and Ethanol Concentration in Ethanol-Gasoline Fuels at Three Temperatures, Energy Fuels, 18, 334, doi.org/10.1021/ef034040a ; Pereira R. (2005), Effect of alcohol and copper content on the stability of automotive gasoline, Energy Fuels, 19, 426, doi.org/10.1021/ef049849h ; Young J. (2004), Lead dioxide, J. Chem. Educ, 81, 1414. ; Liaw H. (2010), Flash point for ternary partially miscible mixtures of flammable solvents, J. Chem. Eng. Data, 55, 134, doi.org/10.1021/je900287r ; Kweon, C.-B., Okada, S., Stetter, J.C., Christenson, G. (2003). SAE Technol. Pap. Ser., 01-1899.