TitleThe Influence of Geometrical Parameters in Socket - Pin Connections on the Value of Opening Force / Wpływ Parametrów Geometrycznych W Połączeniach Typu Gniazdo - Trzpień Na Wartość Siły Otwierającej
Journal titleArchives of Metallurgy and Materials
NumerNo 4 December
Divisions of PASNauki Techniczne
PublisherInstitute of Metallurgy and Materials Science of Polish Academy of Sciences ; Commitee on Metallurgy of Polish Academy of Sciences
Date2015[2015.01.01 AD - 2015.12.31 AD]
ReferencesSadowski (2011), Multidisciplinary analysis of the operational temperature increase of turbine blades in combustion engines by application of the ceramic thermal barrier coatings ( TBC ), Mater Sci, 50, 1326. ; Balawender (2011), Experimental and numerical analyses of clinched and adhesively bonded hybrid joints, Adhes Sci Technol, 47, 2391. ; Sadowski (2011), Damage and failure processes of hybrid joints : adhesive bonded aluminium plates reinforced by rivets, Mater Sci, 38, 1256. ; Brock (2012), Design Tool for Injection Molded Snap Fits in Consumer Products of Manufacturing Systems, Journal, 55, 32. ; Petrova (2014), Theoretical modeling and analysis of thermal fracture of semi - infinite functionally graded materials with edge cracks, Meccanica, 49, 2603, doi.org/10.1007/s11012-014-9941-x ; Gajewski (2014), Sensitivity analysis of crack propagation in pavement bituminous layered structures using a hybrid system integrating Artificial Neural Networks and Finite Element Method, Comput Mat Sci, 82, 114, doi.org/10.1016/j.commatsci.2013.09.025 ; Sadowski (2005), Prediction of the mechanical response of polycrystalline ceramics containing metallic intergranular layers under uniaxial tension, Comput Mat Sci, 34, 46, doi.org/10.1016/j.commatsci.2004.10.005 ; Sadowski (2009), Thermal analysis of layered FGM cylindrical plates subjected to sudden cooling process at one side - comparison of two applied methods for problem solution, Mater Sci, 45, 624. ; Postek (2011), Assessing the Influence of Porosity in the Deformation of Metal - Ceramic Composites Interfaces, Composite, 64, 57. ; Silva (2009), da das Analytical models of adhesively bonded joints - Part I : Literature survey, Int J Adhes Adhes, 23, 319, doi.org/10.1016/j.ijadhadh.2008.06.005 ; Dębski (2014), Modelling of microcracks initation and evolution along interfaces of the WC / Co composite by the finite element method, Comput Mat Sci, 83. ; Sadowski (2012), Detection and numerical analysis of the most efforted places in turbine blades under real working conditions, Mater Sci, 64, 285. ; Sadowski (2009), Cracks propagation and interaction in an orthotropic elastic material : analytical and numerical methods, Comput Mat Sci, 68, 687, doi.org/10.1016/j.commatsci.2009.06.006 ; Rusli (2010), Force and tactile feedback in preloaded cantilever snap - fits under manual assembly International of, Journal Industrial Ergonomics, 56, 618, doi.org/10.1016/j.ergon.2010.05.005 ; Marsavina (2009), Kinked cracks at a bi - material ceramic interface - numerical determination of fracture parameters, Comput Mat Sci, 69, 941, doi.org/10.1016/j.commatsci.2008.07.005 ; Burlayenko (2009), Analysis of structural performance of aluminium sandwich plates with foam - filled hexagonal foam, Mater Sci, 66, 658. ; Carrell (2011), Shape memory polymer snap - fits for active disassembly of Cleaner Production, Journal, 59, 2066. ; Balawender (2012), Numerical analysis and experiments of the clinch - bonded joint subjected to uniaxial tension Materials, Computational Science, 49, 270. ; Burlayenko (2012), A numerical study of the dynamic response of sandwich plates initially damaged by low - velocity impact, Comput Mat Sci, 72, 212, doi.org/10.1016/j.commatsci.2011.01.009 ; Sadowski (2010), Experimental investigations and numerical modelling of steel adhesive joints reinforced by rivets, J, 37, 338. ; Gömze (null), Ceramic - based lightweight composites with extreme dynamic strength - IOP Conf http : / dx, Ser Mater Sci Eng doi org, 2, 012033, doi.org/10.1088/1757-899X/47/1/012033 ; Nakonieczny (2009), Modelling of thermal shock in composite material using a meshfree FEM, Mater Sci, 44, 1307. ; Sadowski (2014), Spot welding - adhesive joints : modelling and testing, Adhesion, 40, 346, doi.org/10.1080/00218464.2013.766599 ; Balawender (2011), Technological problems and experimental investigation of hybrid : clinched - adhesively bonded joint, Arch Metall Mat, 48, 439. ; Bieniaś (2012), Analysis of microstructure damage in carbon / epoxy composites using FEM, Comput Mat Sci, 64, 168, doi.org/10.1016/j.commatsci.2012.03.033 ; Oudjenea (2008), On the parametrical study of clinch joining of metallic sheets using the Taguchi method Structures, Engineering, 44, 1782. ; Moroni (2010), Experimental analysis and comparison of the strength of simple and hybrid structural joints, J, 46, 367. ; Sadowski (2013), Heat transfer and stress concentrations in a two - phase polycrystalline composite structure Part I : Theoretical modelling of heat transfer - wiss, Werkstofftech, 44, 497, doi.org/10.1002/mawe.201300155 ; Sadowski (2008), Numerical investigation of local mechanical properties of WC / Co composite, Comput Mat Sci, 43, 235, doi.org/10.1016/j.commatsci.2007.07.030 ; Sadowski (2014), Effect of Tolerance in the Fitting of Rivets in the Holes of Double Lap Joints Subjected to Uniaxial Tension, Key Engineering Materials, 51, 607. ; BirMan (2007), Modelling and Analysis of Functionally Graded Materials and Structures, Appl Mech Rev, 60, 195, doi.org/10.1115/1.2777164 ; Zhao (2007), Synthesis and properties of copper conductive adhesives modified by SiO nanoparticles, Int J Adhes Adhes, 35, 2. ; Sadowski (2012), The influence of quantity and distribution of cooling channels of turbine elements on level of stresses in the protective layer TBC and the efficiency of cooling, Mater Sci, 52, 293. ; Sadowski (2007), Theoretical prediction and experimental verification of temperature distribution in FGM cylindrical plates subjected to thermal shock Heat and Mass Transfer, Int J, 50, 4461. ; Sadowski (2012), The analysis of heat transfer and thermal stresses in thermal barrier coatings under exploitation Defect and Diffusion, Forum, 326. ; Sadowski (2007), Stress distribution due to discontinuities in polycrystalline ceramics containing metallic inter - granular layers, Comput Mat Sci, 39, 230, doi.org/10.1016/j.commatsci.2006.03.022 ; Varis (2006), Ensuring the integrity in clinching process, Mater Proc Technol, 42, 277, doi.org/10.1016/j.jmatprotec.2006.02.001 ; Sadowski (2008), Thermal shock response of FGM cylindrical plates with various grading patterns, Comput Mat Sci, 43, 171, doi.org/10.1016/j.commatsci.2007.07.051 ; Silva (2009), da das Spelt Analytical models of adhesively bonded joints - Part II : Comparative study, Int J Adhes Adhes, 24, 331, doi.org/10.1016/j.ijadhadh.2008.06.007 ; Sadowski (2014), Fatigue response of the hybrid joints obtained by hot spot welding and bonding techniques, Key Engineering Materials, 52, 601. ; Needleman (1987), Acontinuum model forvoid nucleation by inclusion debonding, Appl Mech, 62, 525, doi.org/10.1115/1.3173064 ; Ivanov (2013), Crack propagation In functionally graded strip, European Physical Journal Special Topics, 222. ; Sadowski (2006), A new model for the timedependent behaviour of polycrystalline ceramic materials with metallic inter - granular layers under tension, Mat Sci Eng, 424. ; Tvergaard (1992), The relation between crack growth resistance and fracture process parameters in elasticplastic solids, Mech Phys Solids, 63, 1377, doi.org/10.1016/0022-5096(92)90020-3 ; Sadowski (2004), Estimation of the crack length after thermal shock in FGM strip, Int J Fract, 127, 135, doi.org/10.1023/B:FRAC.0000035087.34082.88 ; Wu (2009), Study of processing variables on the electrical resistivity of conductive adhesives, Int J Adhes Adhes, 34, 488, doi.org/10.1016/j.ijadhadh.2008.10.003 ; Burlayenko (2010), Influence of skin / core debonding on free vibration behaviour of foam and honeycomb cored sandwich plates Non - Linear Mechanics, J, 65, 959. ; Marsavina (2009), Fracture parameters at bi - material ceramic interfaces under bi - axial state of stress, Comp Mater Sci, 67, 693, doi.org/10.1016/j.commatsci.2008.06.005 ; Burlayenko (2014), Transient dynamic response of debonded sandwich plates predicted with the finite element, Meccanica, 71, 2617, doi.org/10.1007/s11012-014-9924-y ; Sadowski (2008), Development of damage state in porous ceramics under compression, Mater Sci, 43, 75.