Details

Title

Skew Bending of Aircraft Fuselage Panels with “L” and “C” Stringers Mounted by Hybrid Joint / Ukośne Zginanie Poszycia Samolotu Z U Sztywnieniami Typu “L” I “C”, Mocowanymi Za Pomocą Złącza Hybrydowego

Journal title

Archives of Metallurgy and Materials

Yearbook

2015

Numer

No 4 December

Publication authors

Divisions of PAS

Nauki Techniczne

Publisher

Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Commitee on Metallurgy of Polish Academy of Sciences

Date

2015[2015.01.01 AD - 2015.12.31 AD]

Identifier

ISSN 1733-3490

References

Sadowski (2011), Damage and failure processes of hybrid joints : adhesive bonded aluminium plates reinforced by rivets, Computational Materials Science, 50, 1256, doi.org/10.1016/j.commatsci.2010.06.022 ; Sadowski (2004), Estimation of the crack length after thermal shock in FGM strip, International Journal of Fracture, 127, 135, doi.org/10.1023/B:FRAC.0000035087.34082.88 ; Sadowski (2007), Stress distribution due to discontinuities in polycrystalline ceramics containing metallic inter - granular layers, Computational Materials Science, 39, 230, doi.org/10.1016/j.commatsci.2006.03.022 ; Sadowski (2008), Numerical investigation of local mechanical properties of WC / Co composite, Computational Materials Science, 43, 235, doi.org/10.1016/j.commatsci.2007.07.030 ; Sadowski (2013), Heat transfer and stress concentrations in a two - phase polycrystalline composite structure Part I : Theoretical modelling of heat transfer, Materialwissenschaft und Werkstofftechnik, 44, 497, doi.org/10.1002/mawe.201300155 ; Greenhalgh (1996), Characterisation of impact damage in skinstringercomposite structures, Composite Structures, 36, 187, doi.org/10.1016/S0263-8223(96)00077-3 ; Burlayenko (2014), Nonlinear dynamic analysis of harmonically excited debonded sandwich plates using finite element modeling, Composite Structures, 70, 354, doi.org/10.1016/j.compstruct.2013.09.042 ; Higgins (2000), Adhesive bonding of aircraft structures, International Journal of Adhesion and Adhesives, 20, 367, doi.org/10.1016/S0143-7496(00)00006-3 ; Balawender (2012), Numerical analysis and experiments of the clinch - bonded joint subjected to uniaxial tension, Computational Materials Science, 55, 270, doi.org/10.1016/j.commatsci.2012.05.014 ; Marsavina (2009), Kinked cracks at a bi - material ceramic interface - numerical determination of fracture parameters, Computational Materials Science, 74, 941, doi.org/10.1016/j.commatsci.2008.07.005 ; Sadowski (2007), Theoretical prediction and experimental verification of temperature distribution in FGM cylindrical plates subjected to thermal shock of Heat and Mass Transfer, International Journal, 50, 4461. ; Bertolini (2008), An experimental and numerical study on omega stringer debonding, Composite Structures, 86, 233, doi.org/10.1016/j.compstruct.2008.03.013 ; Sadowski (2014), Fatigue response of the hybrid joints obtained by hot spot welding and bonding techniques, Key Engineering Materials, 601. ; Sadowski (2005), Prediction of the mechanical response of polycrystalline ceramics containing metallic inter - granular layers under uniaxial tension, Computational Materials Science, 34, 46, doi.org/10.1016/j.commatsci.2004.10.005 ; Birman (2007), Modelling and analysis of functionally graded materials and structures, Applied Mechanics Review, 1, 195, doi.org/10.1115/1.2777164 ; Chintapalli (2010), The development of a preliminary structural design optimization method of an aircraft wing - box skin - stringer panels, Aerospace Science and Technology, 14, 188, doi.org/10.1016/j.ast.2009.12.007 ; Sadowski (2012), Gradual degradation in two - phase ceramic composites under compression, Computational Materials Science, 79, 209, doi.org/10.1016/j.commatsci.2012.01.034 ; Needleman (1987), A continuum model for void nucleation by inclusion debonding, Journal of Applied Mechanics, 65, 525, doi.org/10.1115/1.3173064 ; Pirondi (2011), Science of Clinch - Adhesive Joints in Hybrid adhesive joints Advanced Structured Materials da pp, Volume, 6, 109. ; Burlayenko (2009), Analysis of structural performance of aluminium sandwich plates with foam - filled hexagonal foam, Computational Materials Science, 69, 658, doi.org/10.1016/j.commatsci.2008.08.018 ; Sadowski (2006), A new model for the timedependent behaviour of polycrystalline ceramic materials with metallic inter - granular layers under tension, Materials Science Engineering A, 424. ; Marsavina (2009), Fracture parameters at bi - material ceramic interfaces under bi - axial state of stress, Computational Materials Science, 72, 693, doi.org/10.1016/j.commatsci.2008.06.005 ; Sadowski (2008), Development of damage state in porous ceramics under compression, Computational Materials Science, 77, 75, doi.org/10.1016/j.commatsci.2007.07.041 ; Sadowski (2011), Multidisciplinary analysis of the operational temperature increase of turbine blades in combustion engines by application of the ceramic thermal barrier coatings ( TBC ), Computational Materials Science, 50, 1326, doi.org/10.1016/j.commatsci.2010.05.032 ; Ivanov (2013), Crack propagation In functionally graded strip, European Physical Journal Special Topics, 222, 1587, doi.org/10.1140/epjst/e2013-01947-3 ; Liua (2007), Sound transmission through curved aircraft panels with stringer and ring frame attachments, Journal of Sound and Vibration, 64, 300. ; Reitemeyera (2013), Laser welding of large scale stainless steel aircraft structures, Physics Procedia, 41, 106, doi.org/10.1016/j.phpro.2013.03.057 ; Heitmann (2006), A new analysis model for the effective stiffness of stiffened metallic panels under combined compression and shear stress, Aerospace Science and Technology, 10, 316, doi.org/10.1016/j.ast.2005.12.008 ; Balawender (2011), Technological problems and experimental investigation of hybrid : clinched - adhesively bonded joint, Archives of Metallurgy and Materials, 56, 439, doi.org/10.2478/v10172-011-0047-3 ; Gajewski (2014), Sensitivity analysis of crack propagation in pavement bituminous layered structures using a hybrid system integrating artificial neural networks and finite element method, Computational Materials Science, 82, 114, doi.org/10.1016/j.commatsci.2013.09.025 ; Bieniaś (2012), Analysis of microstructure damage in carbon / epoxy composites using FEM, Computational Materials Science, 64, 168, doi.org/10.1016/j.commatsci.2012.03.033 ; Balawender (2011), Experimental and numerical analyses of clinched and adhesively bonded hybrid joints, Journal of Adhesion Science and Technology, 25, 2391. ; Burlayenko (2010), Influence of skin / core debonding on free vibration behaviour of foam and honeycomb cored sandwich plates of Non - Linear, International Journal Mechanics, 68, 959, doi.org/10.1016/j.ijnonlinmec.2009.07.002 ; Orifici (2008), An analysis methodology for failure in postbuckling skin - stiffener interfaces, Composite Structures, 58, 186, doi.org/10.1016/j.compstruct.2008.03.023 ; Sadowski (2010), Experimental investigations and numerical modelling of steel adhesive joints reinforced by rivets of Adhesive and Adhesives, International Journal, 30, 338. ; Sadowski (2013), Modern hybrid joints in aerospace : Modelling and testing, Archives of Metallurgy and Materials, 51, 163. ; Sadowski (2014), Effect of tolerance in the fitting of rivets in the holes of double lap joints subjected to uniaxial tension, Key Engineering Materials, 607. ; Silva (2009), da das Analytical models of adhesively bonded joints - Part II : Comparative study of Adhesive and Adhesives, International Journal, 29, 331. ; Moroni (2010), Experimental analysis and comparison of the strength of simple and hybrid structural joints of Adhesive and Adhesives, International Journal, 30, 367. ; Sadowski (2013), Numerical study of the prestressed connectors and their distribution on the strength of a single lap a double lap and hybrid joints subjected to uniaxial tensile test, Archives of Metallurgy and Materials, 58, 581, doi.org/10.2478/amm-2013-0041 ; Burlayenko (2012), A numerical study of the dynamic response of sandwich plates initially damaged by low - velocity impact, Computational Materials Science, 76, 212, doi.org/10.1016/j.commatsci.2011.01.009 ; Burlayenko (2014), Transient dynamic response of debonded sandwich plates predicted with the finite element, Meccanica, 71, 2617, doi.org/10.1007/s11012-014-9924-y ; Sadowski (2012), Detection and numerical analysis of the most efforted places in turbine blades under real working conditions, Computational Materials Science, 64, 285, doi.org/10.1016/j.commatsci.2012.02.048 ; Sadowski (2012), The analysis of heat transfer and thermal stresses in thermal barrier coatings under exploitation, Defect and Diffusion Forum, 326. ; Varis (2006), Ensuring the integrity in clinching process Materials Processing Technology, Journal, 174, 277. ; Oudjenea (2008), On the parametrical study of clinch joining of metallic sheets using the Taguchi method, Engineering Structures, 30, 1782, doi.org/10.1016/j.engstruct.2007.10.017 ; Jun (2014), A numerical model for bird strike on sidewall structure of an aircraft nose, Chinese Journal of Aeronautics, 27, 542, doi.org/10.1016/j.cja.2014.04.019 ; Wu (2009), Study of processing variables on the electrical resistivity of conductive adhesives of Adhesive and Adhesives, International Journal, 29, 488. ; Sadowski (2014), Experimental investigation and numerical modelling of spot welding - adhesive joints response, Composite Structures, 112, 66, doi.org/10.1016/j.compstruct.2014.01.008 ; Silva (2009), da das Analytical models of adhesively bonded joints - Part I : Literature survey of Adhesive and Adhesives, International Journal, 29, 319. ; Postek (2011), Assessing the influence of porosity in the deformation of metal - ceramic composites, Composite Interfaces, 67, 57. ; Tvergaard (1992), The relation between crack growth resistance and fracture process parameters in elasticplastic solids of Mechanics and Physics of Solids, Journal, 66, 1377. ; Varis (2003), A simple testing - based procedure and simulation of the clinching process using finite element analysis for establishing clinching parameters, Thin Walled Structures, 41, 691, doi.org/10.1016/S0263-8231(03)00026-0 ; Zhao (2007), Synthesis and properties of copper conductive adhesives modified by SiO nanoparticles of Adhesive and Adhesives, International Journal, 27, 2. ; Sadowski (2011), Multiscale Modelling of Twophase Ceramic Matrix Composites, Computational Materials Science, 78, 1336, doi.org/10.1016/j.commatsci.2010.04.011 ; Sadowski (2009), Cracks propagation and interaction in an orthotropic elastic material : analytical and numerical methods, Computational Materials Science, 73, 687, doi.org/10.1016/j.commatsci.2009.06.006 ; Sadowski (2009), Thermal analysis of layered FGM cylindrical plates subjected to sudden cooling process at one side - comparison of two applied methods for problem solution, Computational Materials Science, 45, 624, doi.org/10.1016/j.commatsci.2008.07.011 ; Sadowski (2012), The influence of quantity and distribution of cooling channels of turbine elements on level of stresses in the protective layer TBC and the efficiency of cooling, Computational Materials Science, 52, 293, doi.org/10.1016/j.commatsci.2011.02.027 ; Sadowski (2008), Thermal shock response of FGM cylindrical plates with various grading patterns, Computational Materials Science, 43, 171, doi.org/10.1016/j.commatsci.2007.07.051 ; Petrova (2014), Theoretical modeling and analysis of thermal fracture of semi - infinite functionally graded materials with edge cracks, Meccanica, 49, 2603, doi.org/10.1007/s11012-014-9941-x ; Balawender (2011), Experimental and Numerical Analyses of Clinched and Adhesively Bonded Hybrid Joints, and Journal of Adhesion Science and Technology, 25, 2391. ; Sadowski (2011), Technology of Clinch - Adhesive Joints in Hybrid adhesive joints Advanced Structured Materials da pp, Volume, 6, 149. ; Dębski (2014), Modelling of microcracks initation and evolution along interfaces of the WC / Co composite by the finite element method, Computational Materials Science, 83, 403, doi.org/10.1016/j.commatsci.2013.11.045 ; Golewski (2012), Numerical modelling crack propagation under Mode II fracture in plain concretes containing siliceous fly - ash additive using XFEM method, Computational Materials Science, 75, 75, doi.org/10.1016/j.commatsci.2012.05.009 ; Nakonieczny (2009), Modelling of thermal shock in composite material using a meshfree FEM, Computational Materials Science, 44, 1307, doi.org/10.1016/j.commatsci.2008.08.019 ; Sadowski (2014), Spot welding - adhesive joints : modelling and testing of Adhesion, Journal, 90. ; Burlayenko (2015), An evaluation of displacement - based finite element models used for free vibration analysis of homogeneous and composite plates, Journal of Sound and Vibration, 358, 4, doi.org/10.1016/j.jsv.2015.08.010

DOI

10.1515/amm-2015-0451

×