Silver Matrix Composites - Structure and Properties

Journal title

Archives of Metallurgy and Materials




No 1 March

Publication authors

Divisions of PAS

Nauki Techniczne


Commitee on Metallurgy of Polish Academy of Sciences ; Institute of Metallurgy and Materials Science of Polish Academy of Sciences




ISSN 1733-3490


Burdzik (2014), Research on influence of fatigue metal damage of the inner race of bearing on vibration in different frequencies of Metallurgy and, Archives Materials, 59, 1275. ; Bogdan (2012), Influence of surface treatment on the wetting process of jute fibres with thermosetting polyester resin of Chemical, Polish Journal Technology, 14, 21. ; Dolata (2012), Aspects of fabrication aluminium matrix heterophase composites by suspension method Conference Series - Materials Science and Article Number, Engineering, 35. ; Dolata (2011), Interaction of Al - Si alloys with SiC / C ceramic particles and their influence on microstructure of composites State, Solid Phenomena, 176. ; Mizuuchia (2012), Processing of diamond - particle - dispersed silver - matrix composites in solid - liquid co - existent state by SPS and their thermal conductivity :, Composites Part B Engineering, 43, 1445, ; Yi Chang (2000), Thermal Expansion Behavior of Silver Matrix Composites Metallurgical and Materials, Transactions, 31. ; Rigou (2012), Silver based composite coatings with improved sliding wear behavior, Wear, 290. ; Tavangar (2007), Assessing predictive schemes for thermal conductivity against diamond - reinforced silver matrix composites at intermediate phase contrast, Scripta Materialia, 56, 357, ; Oleksiak (2012), Application of the flotation process in the silver recovery from the wastes generated during the silvery semi - products manufacturing, Metalurgija, 51, 298. ; Kozioł (2012), Experimental study on the effect of stitch arrangement on mechanical performance of GFRP laminates manufactured on a basis of stitched preforms of Composite, Journal Materials, 46, 1067. ; Burdzik (2014), Analysis of impact of chosen parameters on the wear of camshaft of Metallurgy and, Archives Materials, 59, 957. ; Song (2015), Correlation between friction and wear properties and electrical performance of silver coated electrical connectors, Wear, 330. ; Dyzia (2012), Preliminary analysis of aluminum matrix compositions for composites reinforcement with carbon fibers, Steel Research International, 83, 981, ; Blacha (2014), The effects of mass transfer in the liquid phase on the rate of aluminium evaporation from the Ti - alloy, Metalurgija, 6, 51. ; Lipart (2013), Wastes from the coal - enrichment process as alternative reducers for lead smelting from lead - acid accmulator scrap, Metalurgija, 53, 493. ; Wieczorek (2015), Tribological properties and a wear model of aluminium matrix composites - SiC particles designed for metal forming of Metallurgy and, Archives Materials, 60, 111. ; Siwiec (2014), The effects of temperature on the kinetics of aluminium evaporation from the Ti - alloy, Metalurgija, 6, 225. ; Boczkowska (2013), Porous ceramic - metal composites obtained by infiltration methods, Metalurgija, 52, 345.