Microstructure of the Bonding Zone Between AZ91 and AlSi17 Formed by Compound Casting

Journal title

Archives of Foundry Engineering




vol. 17


No 1

Publication authors

Divisions of PAS

Nauki Techniczne


Archives of Foundry Engineering continues the publishing activity started by Foundry Commission of the Polish Academy of Sciences (PAN) in Katowice in 1978. The initiator of it was the first Chairman Professor Dr Eng. Wacław Sakwa – Corresponding Member of PAN, Honorary Doctor of Czestochowa University of Technology and Silesian University of Technology. This periodical first name was „Solidification of Metals and Alloys” , and made possible to publish the results of works achieved in the field of the Basic Problems Research Cooperation. The subject of publications was related to the title of the periodical and concerned widely understand problems of metals and alloys crystallization in a casting mold. In 1978-2000 the 44 issues have been published. Since 2001 the Foundry Commission has had patronage of the annually published “Archives of Foundry” and since 2007 quarterly published “Archives of Foundry Engineering”. Thematic scope includes scientific issues of foundry industry:

  • Theoretical Aspects of Casting Processes,
  • Innovative Foundry Technologies and Materials,
  • Foundry Processes Computer Aiding,
  • Mechanization, Automation and Robotics in Foundry,
  • Transport Systems in Foundry,
  • Castings Quality Management,
  • Environmental Protection.


The Katowice Branch of the Polish Academy of Sciences




ISSN 2299-2944


Dziadoń (2016), The microstructure of the surface layer of magnesium laser alloyed with aluminum and silicon, Mater Charact, 118, 505, ; Zare (2013), Investigation on interface of Al Cu couples in compound casting, Mater Sci Technol, 29, 190, ; Papis (2009), Light metal compound casting, Sci China Ser E Tech Sci, 52, 1, ; Hajjari (2011), Dissimilar joining of Al Mg light metals by compound casting process, Mater Sci, 46, 6491, ; Choe (2008), Study of the interface between steel insert and aluminum casting in EPC, Mater Sci Technol, 24, 60. ; Mróz (2015), Using the explosive cladding method for production of Mg bimetallic bars, Arch Civ Mech Eng, 15, 317, ; Dziadoń (2011), Formation of layered Mg - eutectic composite using diffusional process at the Mg - Al interface of Metall and, Arch Mater, 56, 677. ; Li (2008), XRD and SEM analysis near the diffusion bonding interface of Mg / Al dissimilar materials, Vacuum, 82, 15, ; Bae (2011), Cladding of Mg alloy with Al by twin - roll casting, Scripta Mater, 64, 836, ; Asano (2008), Formation of in situ composite layer on magnesium alloy surface by casting process Materials, Transactions, 49, 2394. ; Morishige (2008), Dissimilar welding of Al and Mg alloys by FSW, Mater Trans, 49, 1129, ; Zhang (2011), Microstructure ; bonding strength and thickness ratio of Al Al alloy laminated composites prepared by hot rolling, Mater Sci Eng, 528. ; Wierzba (2015), The influence of the asymetric ARB process on the properties of Al Al multi - layer sheets of Metall and, Arch Mater, 60, 2821. ; Avci (2009), Mechanical and microstructural properties of low - carbon steel - plate reinforced gray cast iron, Mater Process Technol, 209. ; Wróbel (2015), Bimetallic casting : ferritic stainless steel - grey cast iron of Metall and, Arch Mater, 60, 2361. ; Emami (2013), Effect of melt - to - solid insert volume ratio on Mg / Al dissimilar metals bonding, Mater Eng Perform, 22, 123, ; Zhang (2011), Microstructure evolution of aluminum / magnesium lap joints welded using MIG process with zinc foil as interlayer, Mater Lett, 65, 3292, ; Borrisutthekul (2005), Dissimilar material laser welding between magnesium alloy and aluminum alloy, Sci Tech Adv Mater, 31, 5052. ; Hajjari (2012), Intermetallic compounds and antiphase domains in Al Mg compound casting, Intermetallics, 23, 182,