TitleDiagnostics of Rotor Damages of Three-Phase Induction Motors Using Acoustic Signals and SMOFS-20-EXPANDED
Journal titleArchives of Acoustics
Divisions of PASNauki Techniczne
PublisherCommittee on Acoustics PAS, PAS Institute of Fundamental Technological Research, Polish Acoustical Society
IdentifiereISSN 2300-262X ; ISSN 0137-5075
ReferencesGorny (2015), Methodology for the construction of a rule - based knowledge base enabling the selection of appropriate bronze heat treatment parameters using rough sets of Metallurgy and Materials, Archives, 13, 309. ; Glowacz (2015), Diagnostics of separately excited DC motor based on analysis and recognition of signals using FFT and Bayes classifier of, Archives Electrical Engineering, 64, 29, doi.org/10.1515/aee-2015-0004 ; Dudek (2009), Neural network adaptation process effectiveness dependent of constant training data availability, Neurocomputing, 72, 15. ; Glowacz (2012), Diagnostics of Direct Current generator based on analysis of monochrome infrared images with the application of cross - sectional image and nearest neighbor classifier with Euclidean distance, Przeglad Elektrotechniczny, 88, 154. ; Izadbakhsh (2015), Dynamic response improvement of hybrid system by implementing ANN - GA for fast variation of photovoltaic irradiation and FLC for wind turbine of, Archives Electrical Engineering, 64, 291, doi.org/10.1515/aee-2015-0024 ; Glowacz (2007), Simulation language for analysis of discrete - continuous electrical systems th IASTED International Conference on Modelling Identification and Control Location : Innsbruck, Austria, 94. ; Jiang (2016), On the bi - dimensional variational decomposition applied to nonstationary vibration signals for rolling bearing crack detection in coal cutters and Technology Article Number, Measurement Science, 27, 065103, doi.org/10.1088/0957-0233/27/6/065103 ; Kalafat (2015), Acoustic emission source localization by artificial neural networks Structural Health Monitoring - An International, Journal, 26, 633. ; Jozwik (2016), Identification and monitoring of noise sources of CNC machine tools by acoustic Holography methods in and Technology Research, Advances Science Journal, 10, 127. ; Jun (2014), Investigations of Thermocouple Drift Irregularity Impact on Error of their Inhomogeneity Correction, Measurement Science Review, 14, 29. ; Perun (2015), Evaluation of state of rolling bearings mounted in vehicles with use of vibration signals of Metallurgy and Materials, Archives, 60, 1679. ; Roj (2015), Method of Measurement of Capacitance and Dielectric Loss Factor Using Artificial Neural Networks, Measurement Science Review, 46, 127. ; Hemmati (2016), Rolling element bearing fault diagnostics using acoustic emission technique and advanced signal processing Proceedings of the Institution of Mechanical Engineers Part - of, J Journal Engineering Tribology, 230, 64. ; Jun (2016), Development and Investigation of the Method for Compensating Thermoelectric Inhomogeneity Error of http dx doi org, International Journal Thermophysics, 25, doi.org/10.1007/s10765-015-2025-x ; Karandikar (2015), Tool wear monitoring using naive Bayes classifiers of, International Journal Advanced Manufacturing Technology, 29, 12. ; Yagami (2015), Turn - to - Turn Insulation Failure Diagnosis of Stator Winding of Low Voltage Induction Motor with the Aid of Support Vector Machine on Dielectrics and, IEEE Transactions Electrical Insulation, 58, 30993106. ; Figlus (2014), Condition monitoring of engine timing system by using wavelet packet decomposition of a acoustic signal of and, Journal Mechanical Science Technology, 28, 1663, doi.org/10.1007/s12206-014-0311-3 ; Sharma (2015), Linear discriminant analysis for the small sample size problem : an overview of Machine Learning and Cybernetics, International Journal, 48, 443. ; Zhang (2015), Acoustic emission detection of rail defect based on wavelet transform and Shannon entropy of and, Journal Sound Vibration, 61, 339. ; Ma (2015), The Acoustic Emission Signal Recognition based on Wavelet Transform and RBF Neural Network of Grid and Distributed Computing, International Journal, 8, 167. ; Hachaj (2012), Pattern Classification Methods for Analysis and Visualization of Brain Perfusion CT Maps Intelligence Paradigms in Advanced Pattern Classification Book Series : Studies in, Computational Computational Intelligence, 14, 386. ; Attoui (2015), Fault Diagnosis of an Induction Generator in a Wind Energy Conversion System Using Signal Processing Techniques and, Electric Power Components Systems, 1, 20. ; Hwang (2015), Support Vector Machine Based Bearing Fault Diagnosis for Induction Motors Using Vibration Signals of Engineering & Technology, Journal Electrical, 10, 1558. ; Kulka (2011), Advances in Digitization of Microphones and Loudspeakers of, Archives Acoustics, 36, 419, doi.org/10.2478/v10168-011-0030-z ; Kang (2015), Experimental Evaluation of Low - Voltage Offline Testing for Induction Motor Rotor Fault Diagnostics Transactions on Industry Applications, IEEE, 51, 13751384. ; Smolnicki (2010), Degradation of a geared bearing of a stacker of Civil and Mechanical, Archives Engineering, 50, 131. ; Kupiec (2015), Magnetic equivalent circuit model for unipolar hybrid excitation synchronous machine of, Archives Electrical Engineering, 64, 107, doi.org/10.1515/aee-2015-0010 ; Wickramarachchi (2016), HHCART : An oblique decision tree &, Computational Statistics Data Analysis, 57, 23. ; Gonzalez (2016), De Santiago Methodology for Overheating Identification on Induction Motors under Voltage Unbalance Conditions in Industrial Processes of Scientific &, Journal Industrial Research, 12, 100. ; Sapena (2015), Fault Diagnosis of Rotating Electrical Machines in Transient Regime Using a Single Stator Current s FFT on Instrumentation and Measurement, IEEE Transactions, 47, 3137. ; Van Hecke (2016), Low speed bearing fault diagnosis using acoustic emission sensors, Applied Acoustics, 105, 35, doi.org/10.1016/j.apacoust.2015.10.028 ; Irfan (2015), Anon - line condition monitoring system for induction motors via instantaneous power analysis of and, Journal Mechanical Science Technology, 29, 14831492, doi.org/10.1007/s12206-015-0321-9 ; Yoon (2015), Planetary gearbox fault diagnostic method using acoustic emission sensors Measurement &, IET Science Technology, 59, 936, doi.org/10.1049/iet-smt.2014.0375 ; Smalcerz (2013), Aspects of Application of Industrial Robots in Metallurgical Processes of Metallurgy and Materials, Archives, 49, 203. ; Mika (2016), Normative measurements of noise at CNC machines workstations in Science and Technology - Research, Advances Journal, 10, 30. ; Stolinski (2015), Detecting Recorded Speech for Polish Language Proceedings of the th International Conference - Green Innovation for African Renaissance Book Series, IEEE Africon, 52. ; Kantoch (2014), Monitoring activities of daily living based on wearable wireless body sensor network th Annual International Conference of the IEEE Engineering in Medicine and Biology Book Series in Medicine and, Society IEEE Engineering Biology Society Conference Proceedings, 28, 586. ; Glowacz (2015), Recognition of Acoustic Signals of Synchronous Motors with the Use of MoFS and Selected Classifiers, Measurement Science Review, 15, 167, doi.org/10.1515/msr-2015-0024 ; Vetrichelvan (2015), An investigation of tool wear using acoustic emission and genetic algorithm of and, Journal Vibration Control, 55, 15. ; Lara (2015), In fluence of constructive parameters and power signals on sound quality and airborne noise radiated by inverter - fed induction motors, Measurement, 73, 503, doi.org/10.1016/j.measurement.2015.05.049 ; Li (2016), Recent progress on decoupling diagnosis of hybrid failures in gear transmission systems using vibration sensor signal : Areview, Measurement, 90, 4, doi.org/10.1016/j.measurement.2016.04.036 ; Glowacz (2009), Diagnostics of commutator DC motor using spectral analysis method, Przeglad Elektrotechniczny, 85, 147. ; Panek (2015), Acoustic analysis assessment in speech pathology detection of and, International Journal Applied Mathematics Computer Science, 25, 631, doi.org/10.1515/amcs-2015-0046 ; Marzec (2015), Methods of face localization in thermograms and, Biocybernetics Biomedical Engineering, 35, 138, doi.org/10.1016/j.bbe.2014.09.001 ; Krolczyk (2016), Metrological changes in surface morphology of high - strength steels in manufacturing processes, Measurement, 34, 176, doi.org/10.1016/j.measurement.2016.03.055 ; Jena (2015), Automatic gear and bearing fault localization using vibration and acoustic signals, Applied Acoustics, 98, 33, doi.org/10.1016/j.apacoust.2015.04.016 ; Kluska (2014), Computer - Assisted Integration of Knowledge in the Context of Identification of the Causes of Defects in Castings of Metallurgy and Materials, Archives, 59, 743. ; Zhang (2015), Wind Power Prediction Considering Nonlinear Atmospheric Disturbances, Energies, 60, 475, doi.org/10.3390/en8010475 ; Glowacz (2012), Feature selection of the armature windings short circuit fault in synchronous motor using genetic algorithm and the Mahalanobis distance, Przeglad Elektrotechniczny, 88, 204.