TitleThermomechanical States in Arc Weld Surfaced Steel Elements
Journal titleArchives of Metallurgy and Materials
NumerNo 3 September
Divisions of PASNauki Techniczne
PublisherInstitute of Metallurgy and Materials Science of Polish Academy of Sciences ; Commitee on Metallurgy of Polish Academy of Sciences
ReferencesChang (2004), Numerical and experimental investigations on the residual stresses of the butt - welded joints, Comput Mater Sci, 29, 511, doi.org/10.1016/j.commatsci.2003.12.005 ; Bokota (2007), Numerical analysis of thermo - mechanical phenomena of hardening process of elements made of carbon steel, Arch Metall Mater, 52, 277. ; Gawąd (2004), Interpretation of the tensile test results interpretation based on two criterion optimization In Informatics in Metal Technology et Cracow, Proc, 27, 14. ; Bokota (1998), Numerical analysis of phase transformations and residual stresses in steel cone - shaped elements hardened by induction and flame methods, Int J Mech Sci, 40, 617, doi.org/10.1016/S0020-7403(97)00084-2 ; Piekarska (2013), Numerical simulation of deformations in T - joint welded by the laser beam, Arch Metall Mater, 58, 1391. ; Kim (2006), Relationship between yield ratio and the material constants of the swift equation Metals Materials No, Int, 12, 131. ; Winczek (2012), A simplified method of predicting stresses in surfaced steel rods, Mater Proc Techn, 212. ; Winczek (2010), Analytical solution to transient temperature field in a half - infinite body caused by moving volumetric heat source Heat Mass Transfer, Int J, 53, 5774. ; Klimpel (2006), The effect of the method and parameters in the GMA surfacing with solid wires on the quality of pudding welds and the content of the base material in the overlay Welding, Int, 20, 845. ; Modenesi (2007), A model for melting rate phenomena in GMA welding, Mater Proc Technol, 189. ; Hrabe (2009), Influence of welding parameters on geometry of weld deposit bead In Manufacturing Systems Regent, Int Proc Conf Economic Eng, 10, 291. ; Ghosh (2013), A study of thermal behaviour during submerged arc welding Strojniški vestnik, Mech Eng, 59, 333, doi.org/10.5545/sv-jme.2012.775 ; Vila (2004), Real da The effect of residual stresses in the lateral - torsional buckling of steel I - beams at elevated temperature, Construct Steel Research, 783, doi.org/10.1016/S0143-974X(03)00143-3 ; Jiang (2010), Numerical simulation to study the effect of repair width on residual stresses of stainless steel clad plate, Int J Pres Ves Pip, 87. ; Piekarska (2012), Theoretical investigations into heat transfer in laser - welded steel sheets, Them Anal, 110. ; Koistinen (1959), A general equation prescribing the extent of the austenite - martensite transformation in pure iron - carbon alloys and plain carbon steels, Acta Metall, 7, doi.org/10.1016/0001-6160(59)90170-1 ; Vishnu (1991), Heat - flow model for pulsed welding, Mater Sci Techn, 7, 649, doi.org/10.1179/mst.19184.108.40.2069 ; Lian (1991), Theoretical model for the tensile work hardening behaviour of dual - phase steel, Mater Sci Eng, 147. ; Winczek (2013), The analysis of stress states in steel rods surfaced by welding, Archiv Metall Mater, 58. ; Domański (2011), Numerical models of hardening phenomena of tools steel base on the TTT and CCT diagrams, Arch Metall Mater, 56. ; Chen (2008), A viscous - elastoplastic constitutive equation incorporating phase transformation with the application to the residual stress analysis for welding process, Mater Proces Technol, 205. ; Joshi (2013), Characterization of material properties and heat source parameters in welding simulation of two overlapping beads on a substrate plate, Comput Mater Sci, 69. ; Avrami (1939), Kinetics of phase change General theory, Chem, 7, 1103. ; Winczek (2011), New approach to modeling of temperature field in surfaced steel elements Heat Mass Transfer, Int J, 54, 4702. ; Parkitny (1999), Modelling of phase transformations during multipass surfacing In : XXXVIII Sympozjon Modelling in Mechanics Silesian University of Technology, Conf Proc, 219.