Tytuł artykułuModelling and Experimental Testing of Hybrid Joints Made of: Aluminium Adherends, Adhesive Layers and Rivets for Aerospace Applications
Tytuł czasopismaArchives of Metallurgy and Materials
Wydział PANNauki Techniczne
WydawcaInstitute of Metallurgy and Materials Science of Polish Academy of Sciences ; Commitee on Metallurgy of Polish Academy of Sciences
ReferencjePostek (2011), Assesing the influence of porosity in the deformation of metal - ceramic composites, Interfaces, 18. ; Marsavina (2007), Stress intensity factors for an interface kinked crack in a bi - material plate loaded normal to the interface, Int J, 145. ; Birman (2007), Modelling of and, Analysis Functionally Graded Materials Structures Appl Mech Rev, 1. ; Silva (2011), da Hybrid adhesive joints, null, 23. ; Burlayenko (2014), numerical study of the Nonlinear dynamic analysis of harmonically excited debonded sandwich plates using finite element modeling, Composite Structures, 37. ; Silva (2009), da das Spelt Analytical models of adhesively bonded joints - Part II : Comparative study, Int J Adhes Adhes, 21, 29. ; Moroni (2010), Experimental analysis and comparison of the strength of simple and hybrid structural joints, Int J, 30, 367. ; Burlayenko (2009), numerical study of the dynamic response of sandwich plates initially damaged by low - velocity impact Mat, Comput Sci, 212. ; Sadowski (2005), Prediction of the mechanical response of polycrystalline ceramics containing metallic inter - granular layers under uniaxial tension Mat, Comput Sci, 34. ; Tvergaard (1992), The relation between crack growth resistance and fracture process parameters in elastic - plastic solids, Mech Phys Solids, 1377. ; Sadowski (2012), The influence of quantity and distribution of cooling channels of turbine elements on level of stresses in the protective layer TBC and the efficiency of cooling, Mater Sci, 14, 293. ; Balawender (2011), Experimental and numerical analyses of clinched and adhesively bonded hybrid joints, Sci Technol, 31, 2391. ; Burlayenko (2012), numerical study of the dynamic response of sandwich plates initially damaged by low - velocity impact Mat, Comput Sci, 39. ; Darwish (2011), of weld adhesive joints in da Hybrid adhesive joints, Science, 25, 1. ; Marsavina (2009), Kinked cracks at a bi - material ceramic interface - numerical determination of fracture parameters Mat, Comput Sci, 941. ; Sadowski (2018), Effect of aggregate kind and graining on modeling of plain concrete under compression Mat, Comput Sci, 119. ; Pocius (1997), adhesives technology New York, Adhesion, 17. ; Silva (2011), da Handbook of Technology, Adhesion, 22. ; Silva (2008), da Modelling of adhesively bonded joints, null, 19. ; Sadowski (2013), Numerical study of the prestressed connectors and their distribution on the strength of a single lap a double lap and hybrid joints subjected to uniaxial tensile test of and, Archives Metallurgy Materials, 581. ; Ivanov (2013), Crack propagation In functionally graded strip, European Physical Journal Special Topics, 222. ; Savchenko (2014), The influence of porosity on the elasticity and strength of alumina ceramics of Silicate Based and Composite Materials, Journal, 16, 44. ; Pirondi (2011), of Clinch - Adhesive Joints in Hybrid adhesive joints Advanced Structured Materials da, Science, 29, 109. ; Sadowski (2016), Numerical modelling of two - phase ceramic composite response under uniaxial loading Structures, Composite, 143. ; Gömze (2009), Alumina - based hetero - modulus ceramic composites with extreme dynamic strength - phase transformation of Si during high speed collision with metallic bodies of Silicate Based and Composite Materials, Journal, 61, 38. ; Petrova (2014), Theoretical modeling and analysis of thermal fracture of semi - infinite functionally graded materials with edge cracks, Meccanica, 49. ; Marsavina (2013), comparison between dynamic and static fracture toughness of polyurethane foams Testing, Polymer, 673. ; Sadowski (2004), Neubrand Estimation of the crack length after thermal shock in FGM strip, Int J, 127. ; Adams (1997), Structural adhesive joints in engineering nd ed, null, 18. ; Sadowski (2008), of damage state in porous ceramics under compression, Development Mater Sci, 43. ; Sadowski (2011), Damage and failure processes of hybrid joints : adhesive bonded aluminium plates reinforced by rivets, Mater Sci, 24, 1256. ; Sadowski (2003), Modelling of porous ceramics response to compressive loading, Am Soc, 2218. ; Sadowski (2014), Experimental investigation and numerical modelling of spot welding - adhesive joints response Structures, Composite, 26, 66. ; Gömze (null), Ceramic - based lightweight composites with extreme dynamic strength - http dx org, Ser Mater Sci Eng, 012033, doi.org/10.1088/1757-899X/47/1/012033 ; Dębski (2014), Modelling of microcracks initation and evolution along interfaces of the WC / Co composite by the finite element method Mat, Comput Sci, 12, 403. ; Needleman (1987), continuum model for void nucleation by inclusion debonding, Appl Mech, 525. ; Sadowski (2012), Detection and numerical analysis of the most efforted places in turbine blades under real working conditions, Mater Sci, 15, 285. ; Sadowski (2014), Spot welding adhesive joints modeling testing of, Journal Adhesion, 27, 346. ; Marsavina (2009), Fracture parameters at bi - material ceramic interfaces under bi - axial state of stress, Mater Sci, 45. ; Silva (2009), da das Spelt Analytical models of adhesively bonded joints - Part Literature survey, Int J Adhes Adhes, 20, 29. ; Sadowski (2011), Multiscale modelling of two - phase ceramic matrix composites Mat, Comput Sci, 1336. ; Birsan (2012), Altenbach Deformation analysis of functionally graded beams by the direct approach Part, Composites, 1315. ; Sadowski (2007), Stress distribution due to discontinuities in polycrystalline ceramics containing metallic inter - granular layers Mat, Comput Sci, 11, 39. ; Bieniaś (2012), of microstructure damage in carbon / epoxy composites using Mat, Analysis Comput Sci, 13, 168. ; Gajewski (2017), Geometry optimization of a thin - walled element for an air structure using hybrid system integrating artificial neural network and finite element method, null, 28, 159.