Details

Title

Selected studies of flow maldistribution in a minichannel plate heat exchanger

Journal title

Archives of Thermodynamics

Yearbook

2017

Numer

No 3

Publication authors

Divisions of PAS

Nauki Techniczne

Publisher

The Committee on Thermodynamics and Combustion of the Polish Academy of Sciences

Date

2017

Identifier

eISSN 2083-6023 ; ISSN 1231-0956

References

MikielewiczD (2016), Pressure drop of during flow condensation in minichannels, Int J Refrig, 7000, doi.org/10.1016/j.ijrefrig.2016.03.005 ; SturgisJ (1999), Assessment of CHF enhancement mechanisms in a curved rectangular channel subjected to concave heating Heat Transfer, null, 121. ; LaClairT (2000), Thermal transients in a capillary evaporator prior to the initiation of boiling, Int J Heat Mass Tran, 13, 3937, doi.org/10.1016/S0017-9310(00)00042-9 ; ReddyS (null), of systems thermal management and efficiency with single phase cooling, review Int J Heat Mass Tran, 14, 2015, doi.org/10.1016/j.ijheatmasstransfer.2015.07.134 ; NielsenK (2012), Degradation of the performance of microchannel heat exchangers due to flow maldistribution, Appl Therm Eng, 236, doi.org/10.1016/j.applthermaleng.2012.02.019 ; MikielewiczD (2013), Flow boiling intensification in minichannels by means of mechanical flow turbulising inserts, Int J Therm Sci, 79, doi.org/10.1016/j.ijthermalsci.2012.10.002 ; MikielewiczD (2008), study of flow boiling heat transfer in minichannels, Arch, 29, 73. ; LalotS (1999), Flow maldistribution in heat exchangers, Appl Therm Eng, 19, 847. ; TuckermanD (1981), performance heat sinking for Device, VLSI IEEE, 126, doi.org/10.1109/EDL.1981.253672 ; OrnatskiiA (1965), Heat transfer crisis in a forced flow of under - heated water in small - bore tubes Temp, null, 441. ; TuoH (2013), Effect of the header pressure drop induced flow maldistribution on the microchannel evaporator performance, Int J Refrig, 31, 2176. ; TengJ (2012), in, Fluid Dynamics, 403, doi.org/10.1002/97835276314453 ; MudawarI (2011), Two - phase microchannel heat sinks theory applications limitations, Electron, 11, 133. ; Ramos (2011), CFD study of liquid - cooled heat sinks with microchannel flow field configurations for electronics cells and concentrated solar cells, fuel Appl Therm Eng, 25, 2494, doi.org/10.1016/j.applthermaleng.2011.04.015 ; BassiounyM (1984), Flow distribution and pressure drop in plate heat exchangers - II type arrangement, Chem Eng Sci, 27, 39, doi.org/10.1016/0009-2509(84)80177-3 ; MudawarI (1985), Boiling heat transfer and critical heat flux in high - speed rotating liquid films, Int J Heat Mass Tran, 28, 795, doi.org/10.1016/0017-9310(85)90230-3 ; MinqiangP (2009), CFD - based study of velocity distribution among multiple parallel microchannels, Comput, 11, 1133, doi.org/10.4304/jcp.4.11.1133-1138 ; WangJ (2011), Theory of flow distribution in manifolds, Chem Eng J, 22, 168, doi.org/10.1016/j.cej.2011.02.050 ; MehendaleS (2000), Fluid flow and heat transfer at micro - and meso - scales with application to heat exchanger design, Appl Mech Rev, 53. ; KandlikarS (2005), High flux heat removal with microchannels A roadmap of challenges and opportunities Transfer, Heat Eng, 19, 5, doi.org/10.1080/01457630591003655 ; HuangL (2014), computational fluid dynamics and effectiveness - NTU based co - simulation approach for flow mal - distribution analysis in microchannel heat exchanger headers, Appl Therm Eng, 447, doi.org/10.1016/j.applthermaleng.2014.01.046 ; WenJ (2004), Study of flow distribution and its improvement on the header of plate - fin heat exchanger, Cryogenics, 21, 823, doi.org/10.1016/j.cryogenics.2004.04.009 ; BejanA (1997), Deterministic tree networks for fluid flow : geometry for minimal flow resistance between a volume and one point, Fractals, 24, 685, doi.org/10.1142/S0218348X97000553 ; AcrivosA (1959), Flow distributions in manifolds, Chem Eng Sci, 29, 112. ; ZhangZ (2003), CFD simulation on inlet configuration of plate - fin heat exchangers, Cryogenics, 12, 673, doi.org/10.1016/S0011-2275(03)00179-6 ; ManojSivaV (2014), DasS Effect of flow maldistribution on the thermal performance of parallel microchannel cooling systems, Int J Heat Mass Tran, 73, doi.org/10.1016/j.ijheatmasstransfer.2014.02.017 ; MudawarI (2001), Assessment of high - heat - flux thermal management schemes, IEEE Trans Technol, 24, 122. ; MuellerA (1988), of various types of flow maldistribution in heat exchangers Heat, Review Eng, 20, 36, doi.org/10.1080/01457638808939664 ; MudawarI (2009), Two - phase spray cooling of hybrid vehicle Components, electronics IEEE Trans Technol, 15, 501, doi.org/10.1109/TCAPT.2008.2006907 ; HallD (1999), Ultra - high critical heat flux for subcooled water flow boiling II high - CHF database and design equations, Int J Heat Mass Transf, 1429. ; Manag (null), Numerical investigations on characteristics of methane catalytic combustion in micro - channels with a concave or convex wall cavity, Energy Convers, 16, 2015, doi.org/10.1016/j.enconman.2015.03.058 ; WangJ (2001), Analytical solution of flow coefficients for a uniformly distributed porous channel, Chem Eng J, 30, 1, doi.org/10.1016/S1385-8947(00)00263-1 ; BajuraR (1971), model for flow distribution in manifolds, Eng Power, 28, 1. ; AmadorC (2004), Flow distribution in different microreactor scale - out geometries and the effect of manufacturing tolerances and channel blockage, Chem Eng J, 23, 101, doi.org/10.1016/j.cej.2003.11.031 ; BassiounyM (1984), Flow distribution and pressure drop in plate heat exchangers type arrangement, Chem Eng Sci, 26, 39, doi.org/10.1016/0009-2509(84)80176-1 ; MikielewiczD (2010), thermodynamic criterion for selection of working fluid for subcritical and supercritical domestic micro, Appl Therm Eng, 9, 2357, doi.org/10.1016/j.applthermaleng.2010.05.035 ; KumaranR (2011), KumaraguruparanG numerical and experimental investigation of flow maldistribution in a microchannel heat sink, Int Commun Heat Mass, 37, 1349. ; KimS (2014), of databases and predictive methods for heat transfer in condensing and boiling mini / micro - channel flows, Review Int J Heat Mass Tran, 18, 77, doi.org/10.1016/j.ijheatmasstransfer.2014.05.036 ; AnbumeenakshiC (2016), Experimental investigation of header shape and inlet configuration on flow maldistribution in microchannel, Exp Therm Fluid Sci, 39, doi.org/10.1016/j.expthermflusci.2016.02.004 ; JimenezP (1994), multi - kilowatt immersion - cooled standard electronic clamshell module for future aircraft avionics, Electron, 12, 116. ; KandlikarS (2003), of microchannel flow passages - thermohydraulic performance and fabrication technology Heat, Evolution Eng, 24, 1, doi.org/10.1080/014576303040405 ; BerthierJ (null), Whole blood spontaneous capillary flow in narrow groove microchannels, Sensors Chem, 17, 206, doi.org/10.1016/j.snb.2014.09.040

DOI

10.1515/aoter-2017-0020

×