Details

Title

The performance of H2O, R134a, SES36, ethanol, and HFE7100 two-phase closed thermosyphons for varying operating parameters and geometry

Journal title

Archives of Thermodynamics

Yearbook

2017

Numer

No 3

Publication authors

Divisions of PAS

Nauki Techniczne

Publisher

The Committee on Thermodynamics and Combustion of the Polish Academy of Sciences

Date

2017

Identifier

ISSN 1231-0956 ; eISSN 2083-6023

References

MuszynskiT (2016), Heat transfer characteristics of hybrid microjet Microchannel cooling module, Appl Therm Eng, 1360, doi.org/10.1016/j.applthermaleng.2015.08.085 ; NoieS (2005), Heat transfer characteristics of a two - phase closed thermosyphon, Appl Therm Eng, 25, 495. ; JiaoB (2008), Investigation on the effect of filling ratio on the steady - state heat transfer performance of a vertical two - phase closed thermosyphon, Appl Therm Eng, 28, 1417. ; MuszynskiT (2017), Investigations on mixture preparation on two phase adiabatic pressure drop of a during flow in mm diameter channel Arch, null, 20, 134, doi.org/10.1515/aoter-2017-0018 ; ReayD (2013), Heat pipes Theory design applications, null. ; MuszynskiT (2016), Applicability of arrays of microjet heat transfer correlations to design compact heat exchangers, Appl Therm Eng, 105. ; OngK (2016), Thermal resistance of a thermosyphon filled with operating at low evaporator temperature, Appl Therm Eng, 15, 410, doi.org/10.1016/j.applthermaleng.2016.06.080 ; AndrzejczykR (2017), Experimental investigations on adiabatic frictional pressure drops of a during flow in mm diameter channel, Exp Therm Fluid Sci, 19, 134, doi.org/10.1016/j.expthermflusci.2016.12.016 ; AndrzejczykR (null), Analysis of the effectiveness of waste heat recovery with application of heat pipe Part Structure and operation of the measurement system design of heat pipe i in Polish, Tech, 2015. ; ElmosbahiM (2012), An experimental investigation on the gravity assisted solar heat pipe under the climatic conditions of, Tunisia Energy Convers, 11, 594. ; MikielewiczD (2016), Analytical model with nonadiabatic effects for pressure drop and heat transfer during boiling and condensation flows in conventional channels and minichannels Heat, Eng, 25, 37. ; TekeI (2010), Determining the best type of heat exchangers for heat recovery, Appl Therm Eng, 27, 577. ; CieślińskiJ (2016), Effect of nanofluid concentration on two - phase thermosyphon heat exchanger performance Arch, null, 37, doi.org/10.1515/aoter-2016-0011 ; AndrzejczykR (2014), Modern method of snow and ice remowal from operational surfaces Bud in Polish, Mater, 12, 18. ; MacGregorR (2013), Investigation of low Global Warming Potential working fluids for a closed two - phase thermosyphon, Appl Therm Eng, 16, 917. ; MuszynskiT (2016), Parametric study of fluid flow and heat transfer over louvered fins of air heat pump evaporator, Arch, 21, 37, doi.org/10.1515/aoter-2016-0019 ; KannanM (2014), An experimental study on heat transport capability of a two phase thermosyphon charged with different working fluids, Am Appl Sci, 13, 584. ; AndrzejczykR (2016), of the efectiveness of waste heat recovery Part Experimental investigations in Polish, Analysis Tech, 26. ; MaH (2016), Experimental study on heat pipe assisted heat exchanger used for industrial waste heat recovery, Appl Energy, 23, 169. ; JouharaH (2010), Experimental investigation of small diameter two - phase closed thermosyphons charged with water FC FC FC, Appl Therm Eng, 14, 77. ; AndrzejczykR (2017), Thermodynamic and geometrical characteristics of mixed convection heat transfer in the shell and coil tube heat exchanger with baffles, Appl Therm Eng, 18, doi.org/10.1016/j.applthermaleng.2017.04.053 ; BielińskiH (2016), Application of a two - phase thermosyphon loop with minichannels and a minipump in computer cooling Arch, null, 1, doi.org/10.1515/aoter-2016-0001 ; MuszynskiT (2017), and experimental investigations of a cylindrical microjet heat exchanger for waste heat recovery systems, Design Appl Therm Eng, 22, doi.org/10.1016/j.applthermaleng.2017.01.021 ; FadhlB (2013), Numerical modelling of the temperature distribution in a two - phase closed thermosyphon, Appl Therm Eng, 12, 122.

DOI

10.1515/aoter-2017-0013

×