Electrostatic deposition of nanothin films on metal substrate
Divisions of PAS
ISSN 0239-7528, eISSN 2300-1917
Cloupeau M. (1989), Electrostatic spraying of liquids in cone - jet mode, J. Electrostatics, 22, 135. ; Cloupeau M. (1990), Electrostatic spraying of liquids. Main functioning modes, J. Electrostatics, 25, 165. ; Cloupeau M. (1994), Electrohydrodynamic spraying functioning modes. A critical review, J. Aerosol Sci, 25, 6, 1121. ; Grace J. (1994), A review of liquid atomization by electrical means, J. Aerosol Sci, 25, 6, 1005. ; Hayati I. (1987), Investigations into the Mechanisms of Electrohydrodynamic Spraying of Liquids. Pt.I. Effect of electric field and the environment on pendant drop and factors affecting the formation of stable jets and atomization, J. Coll. Interface Sci, 117, 1, 205. ; Hayati I. (1987), Investigations into the Mechanisms of Electrohydrodynamic Spraying of Liquids. Pt.II. Mechanism of stable jet formation and electrical forces acting on a liquid cone, J. Coll. Interface Sci, 117, 1, 222. ; Jaworek A. (1999), Classification of the modes of EHD spraying, J. Aerosol Sci, 30, 7, 873. ; Jaworek A. (1999), Jet and drop formation in electrohydrodynamic spraying of liquids. A systematic approach, Exp. Fluids, 27, 1, 43. ; Marginean I. (2004), Flexing the electrified meniscus: The birth of a jet in electrosprays, Anal. Chem, 76, 4202. ; Marginean I. (2007), Electrospray characteristic curves: In pursuit of improved performance in the nanoflow regime, Anal. Chem, 79, 21, 8030. ; Marginean I. (2007), Astable regime in electrosprays, Phys. Rev. E, 76, 2. ; Wang D. (2005), High resolution print-patterning of a nano-suspension, J. Nanoparticle Res, 7, 301. ; Lenggoro I. (2006), Nanoparticle assembly on patterned "plus/minus" surfaces from electrospray of colloidal dispersion, J. Coll. Interface Sci, 303, 124. ; Park J.-U. (2007), High-resolution electrohydrodynamic jet printing, Nat. Materials, 6, 10, 782. ; Li X. (2008), Novel patterning of nano-bioceramics: template-assisted electrohydrodynamic atomization spraying, J. R. Soc. Interface, 5, 253. ; Ahmad Z. (2008), Deposition of nano-hydroxyapatite particles utilising direct and transitional electrohydrodynamic processes, J. Mater. Sci.: Mater. Med, 19, 3093. ; Gopalakrishnan M. (2003), Structural characterisation and strength evaluation of spray formed ceramic composite near-net shapes, J. Mater. Proc. Technol, 135, 228. ; Chaudhury S. (2004), A new spray forming technique for the preparation of aluminium rutile (TiO<sub>2</sub>) ex situ particle composite, J. Mater. Proc. Technol, 145, 385. ; Jaworek A. (2007), Electrospray droplet sources for thin film deposition. A review, J. Mater. Sci, 42, 1, 266. ; Jaworek A. (2008), Electrospraying route to nanotechnology: An overview, J. Electrostatics, 66, 3-4, 197. ; Chen C. (1999), Electrostatic sol-spray deposition of nanostructured ceramic thin films, J. Aerosol Sci, 30, 7, 959. ; Jayasinghe S. (2004), Controlled deposition of nanoparticle clusters by electrohydrodynamic atomization, Nanotechn, 15, 1519. ; Jayasinghe S. (2006), Self-assembled nanostructures via electrospraying, Physica E, 33, 398. ; Wang D. (2007), Coaxial electrohydrodynamic direct writing of nanosuspensions, J. Nanoparticle Res, 9, 825. ; Teng W. (1997), Towards particle-by-particle deposition of ceramics using electrostatic atomization, J. Mater. Sci. Lett, 16, 1017. ; Chen C. (1998), Effects of additives in electrospraying for materials preparation, J. Europ. Ceramic Soc, 18, 1439. ; Nguyen T. (2001), Deposition and characterization of nanocrystalline tetragonal zirconia films using electrostatic spray deposition, Solid State Ionics, 138, 191. ; Balachandran W. (2001), Electrospray of fine droplets of ceramic suspensions for thin film preparation, J. Electrostatics, 50, 4, 249. ; Miao P. (2001), Characterization of ZrO<sub>2</sub> and SiC ceramic thin films prepared by electrostatic atomization, J. Mater. Sci, 36, 2925. ; Miao P. (2002), Formation of ceramic thin films using electrospray in cone-jet mode, IEEE Trans. Ind. Appl, 38, 1, 50. ; Miao P. (1999), Electrostatic atomization of ultra fine spray of ceramic solution, Electrostatics 1999, Inst. Phys. Conf. Ser, 163, 119. ; Wang D. (2006), Solid freeform fabrication of thin-walled ceramic structures using an electrohydrodynamic jet, J. Am. Ceram. Soc, 89, 5, 1727. ; Wang Z. (2008), Fabrication of YSZ thin films from suspension by electrostatic spray deposition, Materials Letters, 62, 425. ; Chaparro A. (2007), Study of membrane electrode assemblies for PEMFC, with cathodes prepared by the electrospray method, J. Power Sources, 169, 77. ; Böttger P. (2007), Electrospraying of colloidal nanoparticles for seeding of nanostructure growth, Nanotechn, 18. ; Lee K. (2006), Direct synthesis and inkjetting of silver nanocrystals toward printed electronics, Nanotechn, 17, 2424. ; Lee D. (2007), Electrohydrodynamic printing of silver nanoparticles by using a focused nanocolloid jet, Appl. Phys. Lett, 90. ; Yu J. (2007), Effect of viscosity of silver nanoparticle suspension on conductive line patterned by electrohydrodynamic jet printing, Appl. Phys. A, 89, 157. ; Ishida Y. (2007), Inkjet printing of nickel nanosized particles for metal-induced crystallization of amorphous silicon, Japanese J. Appl. Phys, 46, 9B, 6437. ; Sobota J. (1997), Ion bombardment of MoS<sub>2</sub> nanoplatelet coatings deposited by electrospraying, Tribology Lett, 3, 161. ; Sorensen G. (1999), Ion bombardment of electrosprayed coatings: an alternative to reactive sputtering?, Surf. Coat. Techn, 112, 1-3, 221. ; Balasubramanian K. (2006), Coaxial electrohydrodynamic atomization of ceramic suspensions, Int. J. Appl. Ceram. Technol, 3, 1, 55. ; Burkarter E. (2007), Superhydrophobic electrosprayed PTFE, Surf. Coatings Techn, 202, 194. ; Burkarter E. (2007), Electrosprayed superhydrophobic PTFE: a non-contaminating surface, J. Phys. D: Appl. Phys, 40, 7778. ; Lu J. (2003), Microstructure and electrical properties of Pb(Zr, Ti)O<sup>3</sup> thick film prepared by electrostatic spray deposition, Sensors Actuators A, 108, 2. ; Wang T. (2005), Ink-jet printing and sintering of PZT, J. Am. Ceram. Soc, 88, 8, 2053. ; Sun D. (2008), Novel forming of columnar lead zirconate titanate structures, J. European Ceramic Soc, 28, 3131. ; Huang J. (2004), Electrospraying of a nanohydroxyapatite suspension, J. Materials Sci, 39, 1029. ; Kim B. (2007), Hydroxyapatite layers prepared by sol-gel assisted electrostatic spray deposition, Ceramics Int, 33, 119. ; Li X. (2008), Development of nano-hydroxyapatite coating by electrohydrodynamic atomization spraying, J. Mater. Sci.: Mater. Med, 19, 1545. ; Thian E. (2008), The role of electrosprayed apatite nanocrystals in guiding osteoblast behaviour, Biomaterials, 29, 1833. ; Thian E. (2007), Influence of nanohydroxyapatite patterns deposited by electrohydrodynamic spraying on osteoblast response, J. Biomed. Mater. Res. Part A, 85A, 1, 188. ; Chen Q. (2006), Improved mechanical reliability of bone tissue engineering (zirconia) scaffolds by electrospraying, J. Am. Ceram. Soc, 89, 5, 1534.