Details

Title

Methanol as a High Purity Hydrogen Source for Fuel Cells: A Brief Review of Catalysts and Rate Expressions

Journal title

Chemical and Process Engineering

Yearbook

2017

Volume

vol. 38

Issue

No 1

Authors

Keywords

copper catalysts ; noble metal catalysts ; fuel cell ; hydrogen production ; CO-PROX

Divisions of PAS

Nauki Techniczne

Coverage

147-162

Publisher

Polish Academy of Sciences Committee of Chemical and Process Engineering

Date

2017.03.30

Type

Artykuły / Articles

Identifier

DOI: 10.1515/cpe-2017-0012 ; ISSN 2300-1925 (Chemical and Process Engineering)

Source

Chemical and Process Engineering; 2017; vol. 38; No 1; 147-162

References

Lachowska (2010), Steam reforming of methanol over Cu Ga catalyst - effect of the reduction conditions on the catalytic performance, Reac Kinet Mech Cat, 101, doi.org/10.1007/s11144-010-0213-z ; Wang (2008), Preferential oxidation of CO in rich stream over Au - Co catalysts, Catal Commun, 9, doi.org/10.1016/j.catcom.2007.12.017 ; Takezawa (1997), Steam reforming and dehydrogenation of methanol : Difference in the catalytic function of copper and group VIII metals, Catal Today, 36, doi.org/10.1016/S0920-5861(96)00195-2 ; Papavasiliou (2009), Steady - state isotopic transient kinetic analysis of steam reforming of methanol over Cu - based catalysts, Appl Catal B Environ, 88, doi.org/10.1016/j.apcatb.2008.10.018 ; Momirlan (2005), The properties of hydrogen as fuel tomorrow in sustainable energy system for a cleaner planet, Int J Hydrogen Energ, 30, doi.org/10.1016/j.ijhydene.2004.10.011 ; Rameshan (2012), CO - selective methanol steam reforming on In - doped Pd studied by in situ - ray photoelectron spectroscopy, Catal, 295, doi.org/10.1016/j.jcat.2012.08.008 ; Patel (2006), Influence of preparation method on performance of Cu - alumina catalysts for the hydrogen production via steam reforming of methanol, Porous Mat, 13, doi.org/10.1007/s10934-006-8033-2 ; Lachowska (2004), Reforming metanolu parą wodną na katalizatorze miedziowo - cynkowo - cyrkonowym modyfikowanym Ga , Mn oraz Mg, Inż Chem Proc, 25. ; Dudfield (2001), A carbon monoxide PROX reactor for PEM fuel cell automotive application, Int J Hydrogen Energ, 26, doi.org/10.1016/S0360-3199(00)00131-2 ; Mastalir (2005), Steam reforming of methanol over Cu catalysts : a kinetic study, Appl Catal AGen, 230, doi.org/10.1016/j.jcat.2004.12.020 ; Purnama (2004), CO formation / selectivity for steam reforming of methanol with a commercial CuO catalyst, Appl Catal A Gen, 259, doi.org/10.1016/j.apcata.2003.09.013 ; Kung (2003), Supported Au catalysts for low temperature CO oxidation, Catal, 216, doi.org/10.1016/S0021-9517(02)00111-2 ; Lee (2004), Methanol steam reforming Cu catalyst : kinetics and effectiveness factor, Appl Catal A Gen, 278, doi.org/10.1016/j.apcata.2004.09.022 ; Samms (2002), Kinetics of methanol - steam reformation in an internal reforming fuel cell, Power Sources, 112, doi.org/10.1016/S0378-7753(02)00089-7 ; Korotkikh (2000), Selective catalytic oxidation of CO in Fuel cell applications, Catal Today, 62, doi.org/10.1016/S0920-5861(00)00426-0 ; Spivey (2005), Catalysis in the development of clean energy technologies, Catal Today, 100, doi.org/10.1016/j.cattod.2004.12.011 ; Santacesaria (1983), Kinetics of catalytic steam reforming of methanol in a CSTR reactor, Appl Catal, 5, doi.org/10.1016/0166-9834(83)80162-6 ; Margitfalvi (2004), Modification of Au / MgO catalysts used in low temperature CO oxidation with Mn and Fe, Appl Catal A Gen, 272, doi.org/10.1016/j.apcata.2004.05.035 ; Idem (1996), Characterization studies of calcined , promoted and non - promoted methanolsteam reforming catalysts, Can J Chem Eng, 74, doi.org/10.1002/cjce.5450740214 ; Agrell (2001), Production of hydrogen by partial oxidation of methanol over Cu / ZnO catalysts prepared by microemulsion technique, Appl Catal A Gen, 211, doi.org/10.1016/S0926-860X(00)00876-0 ; Agrell (2002), Steam reforming of methanol over a Cu catalyst : A kinetic analysis and strategies for suppression of CO formation, Power Sources, 106, doi.org/10.1016/S0378-7753(01)01027-8 ; Wang (2007), Production of hydrogen by steam reforming of methanol over Cu / ZnO catalysts prepared via a practical soft reactive grinding route based on dry oxalate - precursor synthesis, Catal, 246, doi.org/10.1016/j.jcat.2006.12.006 ; Gu (2014), Ordered mosorporous Cu catalysts for CO preferential oxidation in - rich gasees : Influance of copper content and pretreatment conditions, Appl Catal, 152, doi.org/10.1016/j.apcatb.2014.01.011 ; Navarro (2002), Production of hydrogen by partial oxidation of methanol over a Cu catalyst : Influence of the initial state of the catalyst on the start - up behaviour of the reformer, Catal, 212, doi.org/10.1006/jcat.2002.3764 ; Di Benedetto (2013), Role of CO on CO preferential oxidation over CuO catalyst, Appl Catal B Environ, 142, doi.org/10.1016/j.apcatb.2013.05.001 ; Matsumura (2013), Development of durable copper catalyst for hydrogen production by high temeperature methanol steam refo, rming Int J Hydrogen Energ, 38, doi.org/10.1016/j.ijhydene.2013.08.066 ; Liu (2008), Waste - free soft reactive grinding synthesis of high - surface - area copper - manganese spinel oxide catalysts highly effective for methanol steam reforming, Catal Lett, 121, doi.org/10.1007/s10562-007-9311-6 ; Lopez (2012), Hydrogen production from oxidative steam reforming of methanol : Effect of the Cu and Ni impregnation on and their molecular simulation studies, Int J Hydrogen Energ, 37, doi.org/10.1016/j.ijhydene.2012.02.105 ; Yong (2013), Review of methanol steam reforming - Cu - based catalysts , surface reaction mechanisms , and reaction schemes, Int J Hydrogen Energ, 38, doi.org/10.1016/j.ijhydene.2013.03.023 ; Alejo (1997), Partial oxidation of methanol to produce hydrogen over Cu - Znbased catalysts, Appl Catal A Gen, 162, doi.org/10.1016/S0926-860X(97)00112-9 ; Liu (2003), Steam reforming of methanol over Cu catalysts studied in comparison with Cu / ZnO and Cu catalysts, Top Catal, 22, doi.org/10.1023/A:1023519802373 ; Sá (2010), Catalysts for methanol steam reforming - A review, Appl Catal B Environ, 99, doi.org/10.1016/j.apcatb.2010.06.015 ; Avgouropoulos (2002), A comparative study of Pt / , Au / α and CuO catalysts for the selective oxidation of carbon monoxide in excess hydrogen, Catal Today, 75, doi.org/10.1016/S0920-5861(02)00058-5 ; Agrell (2003), Production of hydrogen by partial oxidation of methanol over ZnO - supported palladium catalysts prepared by microemulsion technique, Appl Catal A Gen, 242, doi.org/10.1016/S0926-860X(02)00517-3 ; Chang (2006), Hydrogen production by partial oxidation of methanol over gold catalysts supported on TiO Co Zn ) composite oxides, Appl Catal A Gen, 302, doi.org/10.1016/j.apeata.2005.12.028 ; Amphlett (1985), Hydrogen production by the catalytic steam reforming of methanol Part : Kinetics of methanol decomposition using girdler catalyst, Can J Chem Eng, 66, doi.org/10.1002/cjce.5450630412 ; Mastalir (2007), Steam reforming of methanol over Cu modified with hydrotalcites, Catal Commun, 8, doi.org/10.1016/j.catcom.2007.01.031 ; Dodds (2015), Hydrogen and fuel cell technologies for heating : A review, Int J Hydrogen Energy, 40, doi.org/10.1016/j.ijhydene.2014.11.059 ; Jiang (1993), Kinetic mechanism for the reaction between methanol and water over a Cu catalyst, Appl Catal A Gen, 97, doi.org/10.1016/0926-860X(93)80081-Z ; Hung (2011), Steam reforming of methanol over copper - yttria catalyst supported on praseodymium - aluminum mixed oxides, Catal Commun, 12, 1389, doi.org/10.1016/j.catcom.2011.05.022 ; Peppley (1999), Methanol - steam reforming on Cu catalysts Part : A comprehensive kinetic model, Appl Catal A Gen, 179, doi.org/10.1016/S0926-860X(98)00299-3 ; Wu (2009), The role of the promoters in Cu based catalysts for methanol steam reforming, Catal Lett, 130, doi.org/10.1007/s10562-009-9847-8 ; Snytnikov (2012), Catalysts for hydrogen production in a multifuel processor by methanol , dimethyl ether and bioetanol steam reforming for fuel cell applications, Int J Hydrogen Energ, 37, doi.org/10.1016/j.ijhydene.2012.02.116 ; Shishido (2004), Active Cu / ZnO and Cu catalysts prepared by homogeneous precipitation method in steam reforming of methanol, Appl Catal A Gen, 263, doi.org/10.1016/j.apcata.2003.12.018 ; Liu (2013), Improvement of catalytic performance of preferential oxidation of CO in - richgases on three - dimensionally ordered macro - and mesoporous Pt - Au catalysts -, Appl Catal B Environ, 142, doi.org/10.1016/j.apcatb.2013.06.002 ; Purnama (2004), Activity and selectivity of a nanostructured CuO catalyst in the steam reforming of methanol, Catal Lett, 94, doi.org/10.1023/B:CATL.0000019332.80287.6b ; Jiang (1993), Kinetic study of steam reforming of methanol over copper - based catalysts, Appl Catal A Gen, 93, doi.org/10.1016/0926-860X(93)85197-W ; Liu (2004), Preferential oxidation of CO in over CuO catalysts, Catal Today, 93, doi.org/10.1016/j.cattod.2004.06.049 ; Yao (2006), Effect of preparation method on the hydrogen production from methanol steam reforming over binary Cu catalysts, Appl Catal A Gen, 297, doi.org/10.1016/j.apcata.2005.09.002 ; Takahashi (1982), The mechanism of steam reforming of methanol over a coppersilica catalyst, Appl Catal, 2, doi.org/10.1016/0166-9834(82)80154-1 ; Papavasiliou (2007), Combined steam reforming of methanol over Cu - Mn spinel oxide catalysts, Catal, 251, doi.org/10.1016/j.jcat.2007.07.025 ; Cubeiro (1998), Selective production of hydrogen by partial oxidation of methanol over ZnOSupported palladium catalysts, Catal, 179, doi.org/10.1006/jcat.1998.2184 ; Park (2015), Compact design of oxidative steam reforming of methanol assisted by blending hydrogen peroxide, Int J Hydrogen Energ, 40, doi.org/10.1016/j.ijhydene.2015.07.084 ; Tesser (2009), Methanol steam reforming : A comparison of different kinetics in the simulation of a packed bed reactor, Chem Eng J, 154, doi.org/10.1016/j.cej.2009.06.007 ; Monte (2014), Preferential oxidation of CO in excess over CuO catalysts : Performance as a function of copper coverage and exposed face present in the support, Catal Today, 229, doi.org/10.1016/j.cattod.2013.10.078 ; Pojanavaraphan (2012), Hydrogen production by oxidative reforming of methanol over Au catalysts, Chem Eng J, 192, doi.org/10.1016/j.cej.2012.03.083 ; Urasaki (2005), Hydrogen production via steam - iron reaction using iron oxide modified with very small amounts of palladium and zirconia, Appl Catal A Gen, 288, doi.org/10.1016/j.apcata.2005.04.023 ; Barton (1980), Kinetics of catalytic conversion of methanol at higher pressures, Collect Czech Chem Commun, 45. ; Pojanavaraphan (2014), Effect of support composition and metal loading on Au - xZrxO catalysts for the oxidative steam reforming of methanol, Chem Eng J, 2, 240, doi.org/10.1016/j.cej.2013.11.062 ; Maeda (2008), Performance of Pt Fe mordenite monolithic catalysts for preferential oxidation of carbon monoxide in a refor - mate gas for PEFCs, Appl Catal A Gen, 341, doi.org/10.1016/j.apcata.2008.02.022 ; Geissler (2001), Autothermal methanol reforming for hydrogen production in fuel cell applications, Phys Chem Chem Phys, 3, doi.org/10.1039/b004881j ; Kim (2009), Preferential CO oxidation over supported noble metal catalysts, Catal Today, 146, doi.org/10.1016/j.cattod.2009.01.045 ; Matsumura (2013), Stabilization of Cu catalyst for methanol steam reforming to hydrogen by coprecipitation on zirconia support, Power Sources, 238, doi.org/10.1016/j.jpowsour.2013.03.074 ; Tang (2014), Efficient fabrication of active CuOCeO catalysts for preferential oxidation of CO by solid state impregnation, Appl Catal B Environ, 146. ; Cheng (2012), Zu Effect of on steam reforming of methanol over CuO catalysts, Chem Eng J, 192, doi.org/10.1016/j.cej.2012.03.063 ; Tanaka (2003), Catalytic performance of - promoted Rh / USY catalysts in preferential oxidation of CO in rich hydrogen, Appl Catal A Gen, 250, doi.org/10.1016/S0926-860X(03)00320-X ; Matsumura (2014), Durable Cu composite catalyst for hydrogen production by high temperature methanol steam reforming, Power Sources, 272, doi.org/10.1016/j.jpowsour.2014.09.047 ; Huang (2009), Steam reforming of methanol over CuO catalysts, Appl Catal A Gen, 358, doi.org/10.1016/j.apcata.2009.01.031 ; Ilinich (2013), Kinetics of methanol steam reforming with a Pd catalyst under realistic operating conditions of a portable reformer in fuel cell applications, Ind Eng Chem Res, 52, doi.org/10.1021/ie301606w ; Lindström (2002), Activity and characterization of Cu Cr and Cu / Zr on γ - alumina for methanol reforming for fuel cell vehicles, Appl Catal A Gen, 234, doi.org/10.1016/S0926-860X(02)00202-8

Editorial Board

Editorial Board

Ali Mesbah, UC Berkeley, USA ORCID logo0000-0002-1700-0600

Anna Gancarczyk, Institute of Chemical Engineering, Polish Academy of Sciences, Poland ORCID logo0000-0002-2847-8992

Anna Trusek, Wrocław University of Science and Technology, Poland ORCID logo0000-0002-3886-7166

Bettina Muster-Slawitsch, AAE Intec, Austria ORCID logo0000-0002-5944-0831

Daria Camilla Boffito, Polytechnique Montreal, Canada ORCID logo0000-0002-5252-5752

Donata Konopacka-Łyskawa, Gdańsk University of Technology, Poland ORCID logo0000-0002-2924-7360

Dorota Antos, Rzeszów University of Technology, Poland ORCID logo0000-0001-8246-5052

Evgeny Rebrov, University of Warwick, UK ORCID logo0000-0001-6056-9520

Georgios Stefanidis, National Technical University of Athens, Greece ORCID logo0000-0002-4347-1350

Ireneusz Grubecki, Bydgoszcz Univeristy of Science and Technology, Poland ORCID logo0000-0001-5378-3115

Johan Tinge, Fibrant B.V., The Netherlands ORCID logo0000-0003-1776-9580

Katarzyna Bizon, Cracow University of Technology, Poland ORCID logo0000-0001-7600-4452

Katarzyna Szymańska, Silesian University of Technology, Poland ORCID logo0000-0002-1653-9540

Marcin Bizukojć, Łódź University of Technology, Poland ORCID logo0000-0003-1641-9917

Marek Ochowiak, Poznań University of Technology, Poland ORCID logo0000-0003-1543-9967

Mirko Skiborowski, Hamburg University of Technology, Germany ORCID logo0000-0001-9694-963X

Nikola Nikacevic, University of Belgrade, Serbia ORCID logo0000-0003-1135-5336

Rafał Rakoczy, West Pomeranian University of Technology, Poland ORCID logo0000-0002-5770-926X

Richard Lakerveld, Hong Kong University of Science and Technology, Hong Kong ORCID logo0000-0001-7444-2678

Tom van Gerven, KU Leuven, Belgium ORCID logo0000-0003-2051-5696

Tomasz Sosnowski, Warsaw University of Technology, Poland ORCID logo0000-0002-6775-3766



×