Details

Title

Distinguishing the Plateau and Valley Components of Profiles From Various Types of Two-Process Textures

Journal title

Metrology and Measurement Systems

Yearbook

2016

Volume

vol. 23

Numer

No 4

Publication authors

Divisions of PAS

Nauki Techniczne

Publisher

Polish Academy of Sciences Committee on Metrology and Scientific Instrumentation

Date

2016

Identifier

ISSN 0860-8229

References

Dzierwa (2013), The study of the tribological properties of oneprocess and two - process textures after vapour blasting and lapping using pin - on - disc tests Key, Engineering Materials, 527. ; Leefe (1998), Bi - Gaussian representation of worn surface topography in elastic contact problems for, Tribology Energy Conservation, 281. ; Dzierwa (2014), Comparison of tribological behaviors of one - process and twoprocess steel surfaces in ball - on - disc tests Proceedings of the Institution of Mechanical : of, Engineers Part J Journal Engineering Tribology, 228. ; Watts (1974), Using an hyperbola as a transition model to fit two - regime straight - line data, Technometrics, 16, 369, doi.org/10.1080/00401706.1974.10489205 ; Malburg (1993), Characterization of surface texture generated by plateau - honing process, CIRP Annals, 42, 637, doi.org/10.1016/S0007-8506(07)62527-X ; Pawlus (1993), Effects of honed cylinder surface topography on the wear of piston - piston ring - cylinder assemblies under artificially increased dustiness conditions, Tribology International, 26. ; Grabon (2010), Tribological characteristics of one - process and two - process cylinder liner honed surfaces under reciprocating sliding conditions, Tribology International, 43, 1882, doi.org/10.1016/j.triboint.2010.02.003 ; Willis (1986), Surface finish in relation to cylinder liners, Wear, 109, 351, doi.org/10.1016/0043-1648(86)90278-4 ; Yu (2013), Dimple patterns for different circumstances, Lubrication Science, 25, 67, doi.org/10.1002/ls.168 ; Godi (2014), Chiffre A new procedure for characterizing textured surfaces with a deterministic pattern of valley features, Meas Sci Technol, 24, 085009, doi.org/10.1088/0957-0233/24/8/085009 ; Etsion (2005), State of the art in laser surface texturing ASME of, Journal Tribology, 127, 248, doi.org/10.1115/1.1828070 ; Whitehouse (1985), Assessment of surface finish profiles produced by multiprocess manufacture, Proc Inst Mech Eng, 199. ; Codgell (2008), A Convolved multi - Gaussian probability distribution for surface topography application Precision, Engineering, 32, 34. ; Grabon (2011), Problems of surface topography with oil pockets analysis, Phys Conf Ser, 311. ; Campbell (1973), Cylinder bore surface roughness in internal combustion engines Its appreciation and control, Wear, 19, 163, doi.org/10.1016/0043-1648(72)90302-X ; Pawlus (2008), The method of truncation parameters measurement from material ratio curve Precision, Engineering, 32, 342. ; Pawlus (2008), Simulation of stratified surface topographies, Wear, 264. ; Godi (2014), Chiffre A plateau - valley separation method for textured surfaces with a deterministic pattern Precision, Engineering, 38, 190. ; Greenwood (1966), Contact of nominally flat surfaces Proceedings of the A and, Royal Society Mathematical Physical Engineering Sciences London, 295. ; Zipin (1990), Analysis of the Rk surface roughness parameter proposals Precision, Engineering, 12, 106. ; Jakubiec (2003), Validation of software for calculation the surface roughness parameters according to ISO of th International Conference on Metrology and Properties of engineering Surfaces , Halmstad University, Proc, 3. ; Santochi (1982), A study on the functional properties of the honed surface, CIRP Annals, 31, 432, doi.org/10.1016/S0007-8506(07)63342-3 ; Anderberg (2009), Alternative descriptions of roughness for cylinder liner production of Materials Processing, Journal Technology, 209. ; Nielsen (1988), New approaches to surface roughness evaluation of special surfaces Precision, Engineering, 10, 209. ; Grabon (2014), Proposals of methods of oil capacity calculation, Tribology International, 75.

DOI

10.1515/mms-2016-0046

×