Tytuł artykułu

The influence of hygienisation of sewage sludge on the process of pyrolysis

Tytuł czasopisma

Chemical and Process Engineering




No 1 March

Autorzy publikacji

Wydział PAN

Nauki Techniczne


Polish Academy of Sciences Committee of Chemical and Process Engineering




ISSN 0208-6425


Arabiourrutia M. (2007), Product distribution obtained in the pyrolysis of tyres in a conical spouted bed reactor, Chem. Eng. Sci, 62, 5271, ; Barbooti M. (2004), Optimization of pyrolysis conditions of scrap tires under inert gas atmosphere, J Anal. Appl. Pyrol, 72, 165, ; Bellais M., 2007. <i>Modelling of the pyrolysis of large wood particles.</i> Ph.D Thesis, KTH Chemical Science and Engineering, Stockholm. ; Boxiong S. (2006), Pyrolysis of waste tyres: The influence of USY catalyst/tyre ratio on products, J Anal. Appl. Pyrol, 78, 243, ; Caballero J. (1997), Characterization of sewage sludges by primary and secondary pyrolysis, J Anal. Appl. Pyrol, 40-41, 433, ; Conesa J. (1998), Evolution of gases in the primary pyrolysis of different sewage sludges, Thermochim. Acta, 313, 63, ; Couhert C. (2009), Is it possible to predict gas yields of any biomass after rapid pyrolysis at high temperature from its composition in cellulose, hemicellulose and lignin?, Fuel, 88, 408, ; C. Di Blasi (2008), Modelling chemical and physical processes of wood and biomass pyrolysis, Energy Comb. Sci, 34, 47, ; Domínguez A. (2006), Hydrogen rich fuel gas production from the pyrolysis of wet sewage sludge at high temperature, J Anal. Appl. Pyrol, 77, 127, ; Filip Z. (1988), Comparison of salts marsh humic acid with humic-like substancs from the indigenous plant species Spartina Alterniflora (loisel), Sci. Total Environ, 74, 157, ; Fonts I. (2009), Study of the pyrolysis liquids obtained from different sewage sludge, J Anal. Appl. Pyrol, 85, 184, ; Fullana A. (2003), Pyrolysis of sewage sludge: nitrogenated compounds and pretreatment effects, J Anal. Appl. Pyrol, 68-69, 561, ; Fytili D. (2008), Utilization of sewage sludge in EU application of old and new methods-A review, Ren. Sus. Ener. Rev, 12, 116, ; Gasco G. (2007), The effect of acid treatment on the pyrolysis behavior of sewage sludges, J Anal. Appl. Pyrol, 80, 496, ; Gascó G. (2005), The influence of organic matter on sewage sludge pyrolysis, J Anal. Appl. Pyrol, 74, 413, ; Gondar D. (2005), Characterization and acid-base properties of fulvic and humic acids isolated from two horizons of an ombrotropic peat bog, Geoderma, 126, 367, ; Haykiri-Acma H. (2010), Comparison of the thermal reactivities of isolated lignin and holocellulose during pyrolysis, Fuel Process. Tech, 91, 759, ; Hossain M. (2009), Thermal characterisation of the products of wastewater sludge pyrolysis, J Anal. Appl. Pyrol, 85, 442, ; Chen Y. (1977), Information provided on humic substances by E4/E6 ratios, Soil Sci. Soc. Am. J, 41, 352, ; Inguanzo M. (2002), On the pyrolysis of sewage sludge: the influence of pyrolysis conditions on solid, liquid and gas fractions, J Anal. Appl. Pyrol, 63, 209, ; Islam M. (2008), Liquid fuels and chemicals from pyrolysis of motorcycle tire waste: Product yields, compositions and related properties, Fuel, 87, 3112, ; Lin K.-H. (2009), Pyrolytic product characteristics of biosludge from the wastewater treatment plant of a petrochemical industry, J Hazard. Mater, 171, 208, ; Liu Q. (2004), Effect of inorganic matter on reactivity and kinetics of coal pyrolysis, Fuel, 83, 713, ; Menéndez J. (2004), Microwave pyrolysis of sewage sludge: analysis of the gas fraction, J Anal. Appl. Pyrol, 71, 657, ; Méndez A. (2005), Preparation of carbon-based adsorbents from pyrolysis and air activation of sewage sludges, Chem. Eng. J, 108, 169, ; Mészáros E. (2007), TG/MS, Py-GC/MS and THM-GC/MS study of the composition and thermal behavior of extractive components of Robinia pseudoacacia, J Anal. Appl. Pyrol, 79, 61, ; Patwardhan P. (2010), Influence of inorganic salts on the primary pyrolysis products of cellulose, Biores. Tech, 101, 4646, ; Raclavská H. (2007), Technology for processing and utilization of sludge from municipal wastewater treatment plant. ; Radović L. (1983), Effect of lignite pyrolysis conditions on calcium oxide dispersion and subsequent char reactivity, Fuel, 62, 209, ; Raveendran K. (1995), Influence of mineral matter on biomass pyrolysis characteristics, Fuel, 74, 1812, ; Sánchez M. (2009), Effect of pyrolysis temperature on the composition of the oils obtained from sewage sludge, Biom. Bioener, 33, 933, ; Sato S. (2003), Hydrogen production from heavy oil in the presence of calcium hydroxide, Fuel, 82, 561, ; Swift R. (1996), Methods of soil analysis. Part 3. Chemical methods, 1018. ; Warman P. (2005), Evaluation of sewage sludge, septic waste and sludge compost applications to corn and forage: yields and N, P and K content of crops and soils, Biores. Tech, 96, 955, ; Werle S. (2010), A review of methods for the thermal utilization of sewage sludge: The Polish perspective, Renew. Energ, 35, 1914, ; Werther J. (1999), Sewage sludge combustion, Prog. Energy Comb. Sci, 25, 55, ; Williams P. (2007), Analysis of product from the pyrolysis and liquefaction of single plastics and waste plastic mixtures, Resour. Conservat. Recycl, 51, 754,