This article presents the results of the study of changes in mineral and chemical composition of artificial aggregates consisting of coal shale (a hard coal mining waste) and fluidized ashes. Such an aggregate was used for road construction. After completion of the construction works but before making the road available for public use, significant deformation of the surface in the form of irregular buckling of the asphalt layer occurred. It was excluded that this resulted from mining damage, design errors or performance mistakes, among others. A study of the materials that had been incorporated in the construction layers was undertaken in order to find the component and the mechanism responsible for the buckling of the road surface. A comparison of the mineral and chemical composition of aggregate samples collected from the embankment where the road buckled with the reference sample and samples from places without deformations showed that the bumps in the road embankment consisted of minerals that were not initially present in the aggregate. Wastes produced as a result of high temperatures (slag and power plants ashes, metallurgical wastes) are not as stable in terms of chemical and phase composition in the hypergenic environment. As a result of the processes occurring in the road embankment, anhydrite, which is the primary component of fluidized ashes, was transformed into gypsum and ettringite. As a result of contact with water CaO (present in fluidized ashes) easily changed into calcium hydroxide. As the crystallization of these minerals is expansive, it resulted in the filling of pores and, in extreme cases, in a substantial increase in the volume of the aggregate and, consequently, in the deformation of the road surface.
In this paper, the PLC-based (Programmable Logic Controller) industrial implementation in the form of the general-purpose function block for ADRC (Active Disturbance Rejection Controller) is presented. The details of practical aspects are discussed because their reliable implementation is not trivial for higher order ADRC. Additional important novelties discussed in the paper are the impact of the derivative backoff and the method that significantly simplifies tuning of higher order ADRC by avoiding the usual trial and error procedure. The results of the practical validation of the suggested concepts complete the paper and show the potential industrial applicability of ADRC.
The S-7 borehole log from the Sumina area (USCB Poland) revealed the presence of three basaltic veins originating from a basalt dyke. Coal interlayers in the rocks surrounding the basaltic veins have been coked to form natural coke. Photometric measurements revealed that the optical properties of the studied natural coke samples are characteristic of semi-graphite (Rmax > 9%). The natural coke matrix of all of the analyzed samples has a biaxial negative optical character. Vitrinite in the examined natural coke samples is characterized by a lower optical anisotropy than that of the natural matrix and it has a biaxial positive optical character. Vitrinite in almost all samples taken at locations more distant from the intrusion has a biaxial positive optical character. A reversal of the changes of the true maximum vitrinite reflectance and bireflectance with changing distance from the second basaltic vein has been observed. The temperature regime that acted upon the dispersed organic matter located in the immediate vicinity of the intrusion, estimated on the basis of the selected experimental data, is suggested to be higher than 750 °C.
Rare earth elements are characterized by the high risk of their shortage resulting from limited resources. From this reason REE constitute a group of elements of special importance for the European Union. The aim of this study was to evaluate ashes from the burning of coal in fluidized bed boilers as an potential source of REY . Twelve samples of fly ash and bottom ash taken from power plants in Poland were analyzed. Tests have shown that despite some differences in chemical composition, the fly ash and bottom ash from fluidized beds could be classified as the calsialic, low acid type. It was found that fly ashes contained more REY than bottom ashes. Among REY , the light elements (LREY ) had the highest share in the total REY content in both fly ashes and bottom ashes. Heavy elements (HREY ) had the lowest content. The normalized curves plotted for fly ash samples within almost all of their entire range were positioned above the reference level and these curves were of the L-M or H-M type. The content of the individual REY in these samples was even twice as high as in UCC . The normalized curves plotted for bottom ash samples were classified as of L, L-M or H type. They were positioned on the reference level or above it. The content of the individual REY in these samples was the same or up to about 4 times lower than in UCC. It was found that the content of critical elements and of excessive elements in fly ash and bottom ash differs, which has an effect on the value of the outlook coefficient Coutl, and which is always higher in the case of fly ash than in the case of bottom ash. Nevertheless, the computed values of the outlook coefficient Coutl allow both fly ash and bottom ash from fluidized beds to be regarded as promising REY raw materials.