Search results

Filters

  • Journals
  • Authors
  • Keywords
  • Date
  • Type

Search results

Number of results: 12
items per page: 25 50 75
Sort by:

Abstract

In the Admiralty Bay 36 taxa of macroalgae were found. Among them the most common were: green alga Monostroma hariotti, red algae — Georgiella confluens, Iridaea cordata, Leptosarca simplex and Plocamium cartilagineum, and brown algae — Adenocystis utricularis, Ascoseira mirabilis, Desmarestia anceps, D. ligulata, D. menziesii and Himatothallus grandifolius. The bottom surface covered with macroalgae (in the orthogonal projection on the water mirror) amounts to 36,9 km2 i.e. 31% of the total surface of the bay. In the central part of the Admiralty Bay the macroalgae aggregations occupy 35% of the bottom surface and are most abundant in respect to the density, biomass, number of taxa (33) and diversity. There were distinguished 3 zones of vertical distribution of phytobenthos in the Admiralty Bay. I zone includes the macroalgae in epilittoral, littoral and sublittoral to the depth of 10 m. II and III zones are situated in sublittoral within the depths of 10 60 m and 60—90 m, respectively. Each zone is characterized by the occurrence of different aggregation of taxa. The bottom areas belong to I, II and III zone of macroalgae make 28%, 64% and 8% respectively in relation to the total surface of phytobenthos in the bay. Vertical range of the distinguished zones varies in different parts of the Bay in relation to the bottom character. Macroalgae occur down to the depth of 90 —100 m. The composition of the macroalgae flora evidences for its transitory character between the benthic subantarctic flora and that of the areas adjacent to the Antarctic continent.
Go to article

Abstract

The “Sulmierzyce-Odolanów” study area analyzed in the present paper constitutes an example of the presence of deep Zechstein metallic mineralization in the Fore-Sudetic Monocline. Unlike the shallow deposits which are being mined nowadays, these types of areas were not previously considered in terms of their possible extraction. However, in recent years, due to the development of modern mining technologies, this situation has changed and these areas have become prospective for the future documenting of mineral deposits. The threshold parameters delimiting an ore deposit, recommended for use when preparing geological documentation and not compulsory, have been established by the regulation of the Minister of Environment. In the case of stratabound Zechstein deposits they take the equivalent percentage and productivity of only two metals, i.e. copper, as the main useful component, and silver into account. This leads to the underestimation of the resources of ore which also contains other metals, including zinc and lead, which is particularly disadvantageous in the case of deep deposits, which from an economic standpoint, it is advisable to focus on their richest parts and to document, and in the future to extract all the useful metals. Also, the regulation of the Minister of Environment does not take into account the fluctuations of the market prices of metals over time, the impact of which on the equivalent content and productivity of these elements in the deposit is considerable. This paper presents the authors’ own formulas intended to calculate polymetallic equivalent content and productivity taking the share of four elements in the ore into account: copper, silver, zinc and lead. They also enable determining these values for arbitrarily selected time intervals and tracing their changes over time. Apart from the quality parameters it is also possible to calculate the value of mineral resources in the deposit expressed in American dollars per one square meter of its area for each selected time interval. The calculations used the results of chemical analyses of historical drill cores originating from the studied area. A total of 135 historical holes located within its boundaries were analyzed. Based on the obtained figures, the time-varying resources of the polymetallic equivalent (Cu-Ag-Zn-Pb) were estimated along with their market value expressed in American dollars for each year in the time interval of 2012–2016.
Go to article

Abstract

Microporous carbon molecular sieves of extremely narrow pore size distribution were obtained by carbonization of a novel raw material (Salix viminalis). The precursor is inexpensive and widely accessible. The pore capacity and specific surface area are upgradable by H3PO4 treatment without significant change of narrowed PSD. The dominating pore size indicates that these molecular sieves are a potential competitor to other nanoporous materials such as opened and purified carbon nanotubes.
Go to article

Abstract

This overview paper presents and compares different methods traditionally used for estimating damped sinusoid parameters. Firstly, direct nonlinear least squares fitting the signal model in the time and frequency domains are described. Next, possible applications of the Hilbert transform for signal demodulation are presented. Then, a wide range of autoregressive modelling methods, valid for damped sinusoids, are discussed, in which frequency and damping are estimated from calculated signal linear self-prediction coefficients. These methods aim at solving, directly or using least squares, a matrix linear equation in which signal or its autocorrelation function samples are used. The Prony, Steiglitz-McBride, Kumaresan-Tufts, Total Least Squares, Matrix Pencil, Yule-Walker and Pisarenko methods are taken into account. Finally, the interpolated discrete Fourier transform is presented with examples of Bertocco, Yoshida, and Agrež algorithms. The Matlab codes of all the discussed methods are given. The second part of the paper presents simulation results, compared with the Cramér-Rao lower bound and commented. All tested methods are compared with respect to their accuracy (systematic errors), noise robustness, required signal length, and computational complexity.
Go to article

Abstract

In this paper it is shown that M class PMU (Phasor Measurement Unit) reference model for phasor estimation recommended by the IEEE Standard C37.118.1 with the Amendment 1 is not compliant with the Standard. The reference filter preserves only the limits for TVE (total vector error), and exceeds FE (frequency error) and RFE (rate of frequency error) limits. As a remedy we propose new filters for phasor estimation for M class PMU that are fully compliant with the Standard requirements. The proposed filters are designed: 1) by the window method; 2) as flat-top windows; or as 3) optimal min-max filters. The results for all Standard compliance tests are presented, confirming good performance of the proposed filters. The proposed filters are fixed at the nominal frequency, i.e. frequency tracking and adaptive filter tuning are not required, therefore they are well suited for application in lowcost popular PMUs.
Go to article

Abstract

Coarse-scale studies on chlorophyll a distribution in a region covering the Scotia Front zone showed an increased chlorophyll content and its deeper distribution at stations situated in the frontal zone. The sources of chlorophyll α were probably both the phytoplankton released from melting ice as well as spring bloom.
Go to article

Abstract

In 2011, the Miedzi Copper Corporation (MCC) initiated its exploration program involving deep Cu-Ag deposits in the Fore-Sudetic Monocline. A very vast study area was adopted, along with the use of a wide range of research instruments. In the years 2011–2013 the exploration of MCC involved 21 concession areas. The location of concessions for exploration as well as exploration and prospecting was based on the known prognostic and hypothetical areas with confirmed contact of the Rote Fäule facies with the reduced facies, placed in the proximity of the Zechstein elevations. In 2012 and 2013, historical boreholes drilled mainly by the petroleum industry were logged, and in cases where the preservation of rock material allowed, samples were collected for chemical analyses. Moreover, a wide range of specialized examinations was performed, involving organic chemistry, coal macerals, vitrinite reflectance and petrography, with a particular emphasis on the Rock Eval method. The latter allows the presence of the so-called strong Rote Fäule associated with the presence of the richest mineralized horizons to be established. It was equally important for the purpose of exploration to perform the reprocessing of geophysical data using the innovative method of effective reflection coefficients. This allows transforming a conventional seismic image into an impulse form of seismic records, meaning a temporal sequence of coefficients, whose sections can be correlated with the logs of historical boreholes in order to trace the course of lithological series. This method provides a much higher accuracy for determining structural elements crucial for exploration than before, suggesting the presence of various tectonic phenomena important for mineralization. As a result, a more detailed mineralization distribution model was obtained and the so-called sweet spots were pinpointed, becoming an object of further drilling exploration. The number of active concessions was reduced to 6, which resulted largely not just from the absence of ore, but also from economic premises. The drilling program initiated in 2013 and still continued today allowed the discovery and preliminary documentation of three copper and silver deposits in the Fore-Sudetic Monocline. These are the Mozów and Sulmierzyce deposits, where the presence of prospective areas was previously recorded, as well as the Nowa Sól deposit, discovered in the so-called green field, where no ore exploration was previously conducted. At the current stage of identification, each of these deposits contains resources exceeding 5 million tons of equivalent copper, and the performed economic analyses indicate the viability of their extraction using the modern methods of shaft sinking, air conditioning and waste management.
Go to article

Abstract

Respiratory disturbances frequently accompany stuttering. Their influence on lung ventilation can be assessed by measurement of the end-tidal CO2 concentration (EtCO2). The effectiveness of the CO2-based visual feedback method of breath regulation (VF) designed for stuttering therapy was tested in this study. The aim of the study was to answer the question if the VF helps to reduce respiratory disturbances in stuttering and increase speech fluency. 20 stuttering volunteers aged 13-45 years took part in the 3-parts test consisting of: 1. speaking without any techniques improving speech fluency, 2. learning the VF method, 3. VF-assisted speaking. The CO2/time signal and an acoustic signal of an utterance were recorded during the test. Significant increase of FE - the factor of breath ergonomics during speaking (based on both signals), from 47% to 71% (P < 0.01), and significant decrease of %SS - the percent of syllables stuttered, from 14% to 10% (P < 0.01) were received for VF-assisted utterances compared to the utterances without VF assistance. The results indicate that the VF can help to eliminate respiratory disturbances in stuttering and increase speech fluency.
Go to article

Abstract

Chlorophyll a content and the density and species composition of algae were determined in drifting sea ice north of the Elephant Island (between 54-56°W and 60°30'—61°00'S) at the end of October 1986. In yellow-brownish pieces of brash ice the amount of chlorophyll α was on average 203.5 ± 149.9 mg m-3 at the density of algal cells of 255.7+137.8-103 in cm3. In not visibly discoloured ice the respective values were about 80 times lower, and in surface water about 700 times lower. 69 algal taxa were recorded in the samples, almost all of which were diatoms. Nitzschia cylindrus dominated in all the samples. A comparison of species composition in the investigated habitats revealed that the highest species similarities occurred between samples collected in discoloured ice, lower in the uncoloured ice and the lowest ones in water.
Go to article

Abstract

Three methods of estimating radii of spray droplets are discussed and results of their practical application in the case of explosively produced water spray are reported. Parameters of model radii distributions are fitted using the least squares method. Finally, the data obtained for a number of tests are used for estimating fraction of explosion energy used for pulverization of water in the process of explosive production of water-spray.
Go to article

This page uses 'cookies'. Learn more