Laplace Transform is often used in solving the free vibration problems of structural beams. In existing research, there are two types of simplified models of continuous beam placement. The first is to regard the continuous beam as a single-span beam, the middle bearing of which is replaced by the bearing reaction force; the second is to divide the continuous beam into several simply supported beams, with the bending moment of the continuous beam at the middle bearing considered as the external force. Research shows that the second simplified model is incorrect, and the frequency equation derived from the first simplified model contains multiple expressions which might not be equivalent to each other. This paper specifies the application method of Laplace Transform in solving the free vibration problems of continuous beams, having great significance in the proper use of the transform method.
The paper presents results of numerical calculations and experimental data on the directional pattern of two 38-element parametric arrays composed of ultrasound sources. Two types of antenna arrays are considered, namely with parallel and coaxial connections of ultrasonic transducers (elements). The results of selecting and functional testing of unit elements are described in this paper. It is found that in the coaxial element connection of the antenna array, the level of side lobes is higher than that in the parallel element connection.
Specific requirements are designed and implemented in electronic and telecommunication systems for received signals, especially high-frequency ones, to examine and control the signal radiation. However, as a serious drawback, no special requirements are considered for the transmitted signals from a subsystem. Different industries have always been struggling with electromagnetic interferences affecting their electronic and telecommunication systems and imposing significant costs. It is thus necessary to specifically investigate this problem as every device is continuously exposed to interferences. Signal processing allows for the decomposition of a signal to its different components to simulate each component. Radiation control has its specific complexities in systems, requiring necessary measures from the very beginning of the design. This study attempted to determine the highest radiation from a subsystem by estimating the radiation fields. The study goal was to investigate the level of radiations received and transmitted from the adjacent systems, respectively, and present methods for control and eliminate the existing radiations. The proposed approach employs an algorithm which is based on multi-component signals, defect, and the radiation shield used in the subsystem. The algorithm flowchart focuses on the separation and of signal components and electromagnetic interference reduction. In this algorithm, the detection process is carried out at the bounds of each component, after which the separation process is performed in the vicinity of the different bounds. The proposed method works based on the Fourier transform of impulse functions for signal components decomposition that was employed to develop an algorithm for separation of the components of the signals input to the subsystem.
The article presents the most frequent surname in Lithuania — Kazlauskas. Referring to the article “Mysterious Lewandowski” by K. Skowronek (2000), an attempt has been made to account for this frequency in three various ways. First, the principles behind the quantitative structure of anthroponomasticons (Zipf’s law) and the loss of surnames (genetic drift) are discussed. Then the Slavic origin of the surname under consideration has been highlighted as a typical trait of the majority of surnames in Lithuania. In connection with this fact, it has been stressed that caution must be exercised in proposing a thesis on its origin as a translation from Lithuanian on a mass scale, since this thesis requires plentiful empirical evidence. Finally, the etymology of the name is analyzed. Morphologically it is a typical surname derived from a toponym. This supposition is additionally supported by the existence in Poland of numerous localities called Kozłów, Kozłowo or similar name; these in turn are most likely to have been derived from appellative-based personal names of their owners or inhabitants, such as Kozieł.
The aim of the study was to examine the relationship between tinnitus pitch and maximum hearing loss, frequency range of hearing loss, and the edge frequency of the audiogram, as well as, to analyze tinnitus loudness at tinnitus frequency and normal hearing frequency. The study included 212 patients, aged between 21 to 75 years (mean age of 54.4 ± 13.5 years) with chronic subjective tinnitus and sensorineural hearing loss. For the statistical data analysis we used Chisquare test and Fisher’s exact test with level of significance p < 0:05. Tinnitus pitch corresponding to the frequency range of hearing loss, maximum hearing loss and the edge frequency was found in 70.8%, 37.3%, and 16.5% of the patients, respectively. The majority of patients had tinnitus pitch from 3000 to 8000 Hz corresponding to the range of hearing loss (p < 0:001). The mean tinnitus pitch was 3545 Hz ± 2482. The majority (66%) of patients had tinnitus loudness 4–7 dB SL. The mean sensation level at tinnitus frequency was 4.9 dB SL ± 1.9, and 13 dB SL ± 2.9 at normal hearing frequency. Tinnitus pitch corresponded to the frequency range of hearing loss in majority of patients. There was no relationship between tinnitus pitch and the edge frequency of the audiogram. Loudness matching outside the tinnitus frequency showed higher sensation level than loudness matching at tinnitus frequency.
This paper presents a printed dual band monopole antenna working below 250 MHz using meander line and an added stub. Meander line approach is used to reduce the size of the low frequency monopole. The proposed antenna is fed by microstrip line and printed on FR-4 substrate with an overall size of 290 x 83 mm2. The added stub tuned dual band operation at 114 MHz and 221 MHz with measured reflection coefficient of -19 dB at both bands. The antenna has omni-directional characteristics with efficiency greater than 90% and gain of 1.87, 1.7 dBi at both bands respectively. The antenna design is optimized through a detailed parametric study. This study includes varying stub, Meander, feed and ground dimensions. The antenna has been fabricated and measured where dual band operation in the MHz range is verified.
Thin plates, in the form of individual panels or whole device casings, often separate the noise source from its recipients. It would be very desirable if the panels could effectively block the sound transmission preventing noise from further propagation. This is especially challenging to achieve at low frequencies. A promising approach, intensively developed in the recent years, is to employ active control methods by adding sensors and actuators, and running a control algorithm. However, if the noise is narrow-band, an alternative passive solution originally developed by the authors can be applied. It is based on appropriately located passive elements which can be used to alter the frequency response of the vibrating structure thus improving its sound insulation properties. Such an approach is referred to as the frequency response shaping method. The purpose of this paper is to further develop this method and apply it to a device casing panel. The efficiency of the method is evaluated by simulation and real experiments. Appropriate cost functions and mathematical models are formulated and used to optimise the arrangement of passive elements mounted to the plate, enhancing its sound insulation properties at the given frequency range. The results are reported, and advantages and limits of the method are pointed out and discussed.
The paper presents the results of investigations concerning the influence of gray cast iron modification on free vibration frequency of the disc casting. Three different chemical composition melts of gray cast iron were prepared in induction furnace. During gravity casting 0.05% and 0.3% mass of the Inolate modifier was added on stream of metal for changing graphite flakes in castings. Sound signal vibration of cast iron sample was registered by means on microphone for free vibration frequency measurements. Decreasing of free vibration frequency of modified cast iron in comparison with non modified castings was observed. Higher contents of modifier causes more decreasing of free vibration frequency. Cast iron with smaller contents of carbon and silicon have higher free vibration frequency in comparison with eutectic composition cast iron. Hardness of examined cast iron is lower when the more modifier is added during modification process. Free frequency is smaller with smaller Brinell hardness of disc casting. It was concluded that control of free vibration frequency of disc castings by means of chemical composition and modification process can improved comfort and safety of working parts.
The measurement of frequency characteristics, like magnitude and phase, related to a specific transfer function of DC–DC converters, can be a difficult task – especially when the measured signal approaches the boundary of a small-signal model validity (i:e. 1/3 of the switching frequency fS). It is hard to find a paper where authors mention the measurement techniques they use to draw frequency characteristics. Meanwhile the presence of noise in the output signal does not enable to directly measure the gain and the phase shift between the input and output signals. In such situations additional analysis is required in order to achieve a reliable result. This paper contains a description of a few methods that can be used to analyse measured signals in order to determine the gain and the phase shift of a specific transfer function. They enable to verify mathematical models in a wide range of frequencies (up to 1/3 fS). The methods use signals measured in the time domain and can be implemented in mathematical software such as Matlab or Scilab.
In this paper, two new sinusoidal signal frequency estimators calculated on the basis of four equally spaced signal samples are presented. These estimators are called four-point estimators. Simulation and experimental research consisting in signal frequency estimation using the invented estimators have been carried out. Simulation has also been performed for frequency tracking. The simulation research was carried out applying the MathCAD computer program that determined samples of a sinusoidal signal disturbed by Gaussian noise. In the experimental research, sinusoidal signal samples were obtained by means of a National Instruments PCI-6024E data acquisition card and an Agilent 33220A function generator. On the basis of the collected samples, the values of four-point estimators invented by the authors and, for comparison, the values of three- and four-point estimators proposed by Vizireanu were determined. Next, estimation errors of the signal frequency were determined. It has been shown that the invented estimators can estimate a signal frequency with greater accuracy.
A new method of optical frequency beat counting based on fast Fourier transform (FFT) analysis is described. Signals with a worse signal-to-noise ratio can be counted correctly comparing to the conventional counting method of detecting each period separately. The systematic error of FFT counting below 10 Hz is demonstrated and can be decreased. Additionally the modulation width of a frequency-stabilized laser with high frequency modulation index can be simultaneously measured during a carrier frequency measurement against an optical frequency synthesizer or other laser.
When a frequency domain sensor is under the effect of an input stimulus, there is a frequency shift at its output. One of the most important advantages of such sensors is their converting a physical input parameter into time variations. In consequence, changes of an input stimulus can be quantified very precisely, provided that a proper frequency counter/meter is used. Unfortunately, it is well known in the time-frequency metrology that if a higher accuracy in measurements is needed, a longer time for measuring is required. The principle of rational approximations is a method to measure a signal frequency. One of its main properties is that the time required for measuring decreases when the order of an unknown frequency increases. In particular, this work shows a new measurement technique, which is devoted to measuring the frequency shifts that occur in frequency domain sensors. The presented research result is a modification of the principle of rational approximations. In this work a mathematical analysis is presented, and the theory of this new measurement method is analysed in detail. As a result, a new formalism for frequency measurement is proposed, which improves resolution and reduces the measurement time.
In 2018, the 90th anniversary of Professor Vasiliy Danilovich Bondaletov`s birth will be celebrated. The aim of the article is to remind readers of the quantitative and qualitative method of statistical analysis in anthroponomastic research developed by Professor Bondaletov, as well as to show its advantages over simplified descriptions of the frequency of personal names. In this article, the detailed analysis of male Christian names found in customs books from Northern Russia (1633–1636 and 1678–1680) was conducted. The comparison of statistical data, according to the suggestion of Professor V. D. Bondaletov, enabled us to observe subtle differences between the abovementioned resources, namely to estimate the level of their (dis)similarity and describe the dynamics of the evolution of the resources of male Christian names throughout the 17th century, as well as changes in the popularity of various names.
The authors discuss the main premises of the project “The most popular surnames in Poland — past and present. E-dictionary” which has been in development since July 2014 in IJP PAN in Krakow. They also present its basic aims and functions, progress already made and they compare it with other dictionaries of surnames. The authors describe several aspects of the dictionary related to IT and computers but also those concerned with onomastics and lexicography. Additionally, they pay particular attention to the information contained in specific parts of each entry.
This paper presents an approximate analytical model for estimating the transmission loss (TL) of a finite rectangular plate in the low frequency range, which is based on the modal summation approach (MSA) taking into account the modal radiation impedance and fluid loading. The mode-dependent radiation resistance is calculated using the Rayleigh integral. The fluid loading is taken into account through the natural frequency modified by the added mass. The results are compared with the ones of Statistical Energy Analysis (SEA) coupled with FEM and FEM coupled with BEM. In addition, the effects of the various vibration modes and the fluid loading on TL, and a way for reducing the calculation time are discussed.
The human voice is one of the basic means of communication, thanks to which one also can easily convey the emotional state. This paper presents experiments on emotion recognition in human speech based on the fundamental frequency. AGH Emotional Speech Corpus was used. This database consists of audio samples of seven emotions acted by 12 different speakers (6 female and 6 male). We explored phrases of all the emotions – all together and in various combinations. Fast Fourier Transformation and magnitude spectrum analysis were applied to extract the fundamental tone out of the speech audio samples. After extraction of several statistical features of the fundamental frequency, we studied if they carry information on the emotional state of the speaker applying different AI methods. Analysis of the outcome data was conducted with classifiers: K-Nearest Neighbours with local induction, Random Forest, Bagging, JRip, and Random Subspace Method from algorithms collection for data mining WEKA. The results prove that the fundamental frequency is a prospective choice for further experiments.
In this study, free and forced vibration responses of carbon nanotube reinforced uniform and tapered composite beams are investigated. The governing differential equations of motion of a carbon nanotube (CNT) reinforced uniform and tapered composite beams are presented in finite element formulation. The validity of the developed formulation is demonstrated by comparing the natural frequencies evaluated using present FEM with those of available in literature. Various parametric studies are also performed to investigate the effect of aspect ratio, percentage of CNT content, ply orientation, and boundary conditions on natural frequencies and mode shapes of a CNT reinforced composite beam. It was observed that the addition of carbon nanotube in fiber reinforced polymer composite (FRP) beam enhances the stiffness of the structure which consequently increases the natural frequencies and alters the mode shapes.
To overcome the detrimental influence of α impulse noise in power line communication and the trap of scarce prior information in traditional noise suppression schemes , a power iteration based fast independent component analysis (PowerICA) based noise suppression scheme is designed in this paper. Firstly, the pseudo-observation signal is constructed by weighted processing so that single-channel blind separation model is transformed into the multi-channel observed model. Then the proposed blind separation algorithm is used to separate noise and source signals. Finally, the effectiveness of the proposed algorithm is verified by experiment simulation. Experiment results show that the proposed algorithm has better separation effect, more stable separation and less implementation time than that of FastICA algorithm, which also improves the real-time performance of communication signal processing.
In cellular networks, cells are grouped more densely around highly populated areas to provide more capacity. Antennas are pointed in accordance with local terrain and clutter to reduce signal shadows and interference. Hardware parameters are easily set during installation but difficult to change thereafter. In a dynamic environment of population migration, there is need to continuously tune network parameters to adapt the network performance. Modern mobile equipment logs network usage patterns and statistics over time. This information can be used to tune soft parameters of the network. These parameters may include frequency channel assignment or reuse, and transmitter radiation power assignment to provide more capacity on demand. The paper proposes that by combining the frequency and power assignments, further optimisation in resource allocation can be achieved over a traditional frequency assignment. The solution considers the interference, traffic intensity and use of priority flags to bias some edges. An Edge Weight Power and Frequency Assignment Algorithm is presented to solve the resource allocation problem in cellular networks. The paper also analyses the performance improvements obtained over that of the Edge Weight Frequency Assignment Algorithm. The results show that the proposed algorithm improves the performance of the Edge Weight Frequency Assignment Algorithm depending on the initial structure of the graph.
High voltage direct current (HVDC) emergency control can significantly improve the transient stability of an AC/DC interconnected power grid, and is an important measure to reduce the amount of generator and load shedding when the system fails. For the AC/DC interconnected power grid, according to the location of failure, disturbances can be classified into two categories: 1) interconnected system tie-line faults, which will cause the power unbalance at both ends of the AC system, as a result of the generator rotor acceleration at the sending-end grid and the generator rotor deceleration at the receiving-end grid; 2) AC system internal faults, due to the isolation effect of the DC system, only the rotor of the generator in the disturbed area changes, which has little impact on the other end of the grid. In view of the above two different locations of disturbance, auxiliary power and frequency combination control as well as a switch strategy, are proposed in this paper. A four-machine two-area transmission system and a multi-machine AC/DC parallel transmission system were built on the PSCAD platform. The simulation results verify the effectiveness of the proposed control strategy.
Microwave frequency detectors enable immediate determination of an unknown microwave signal frequency. Measurement is possible if the output characteristic of a frequency detector is unequivocal in a selected band of operation. The paper presents a method for obtaining unequivocal output characteristics for a given band of frequency detector operation.
The paper deals with the basic set-up of single-frequency microchip laser - so called Lyot filter configuration. Description of its operation and practical realization is given. Some results obtained for Nd:YAG/KTP microchip laser are presented. The evidences of single-frequency operation and its limits are emphasized. Described construction constitutes the base for building the frequency stabilization of green 532 nm microchip laser.
In parallel to the ultrasonic noise assessment procedures and research activity in the field there have appeared several papers in the domain of so called high-frequency audiometry which covers the range of frequencies 8-20 kHz. They are important for recognizing the harmfulness and hazard of the audible high frequency sound components in the same range as the one of the low frequency ultrasonic noise. On the other hand there exists a certain inconsequent situation in the general approach to the problem of ultrasonic noise hazard assessment in work places environment which concerns the convention to include the frequency range of 10-20 kHz to the domain of ultrasonics. The range consists of one third octave bands of central frequencies: 10, 12.5, 16, 20 kHz and conventionally is called low frequency ultrasonic noise though at least the components of the two lowest bands are naturally audible by a majority of population (mainly young people).The paper presents a discussion related to some achievements of the two domains and some conclusions which could be useful for a more consequent description of the subject and could be taken into account in the future regulations for the ultrasonic noise assessment in work places environment.
The main aim of this paper is to present recent knowledge about the assessment and evaluation of low frequency noise and infrasound close to the threshold of hearing and the potential effects on human health. Low frequency noise generated by air flowing over a moving car with the open window is chosen as a source of noise. The noise within the interior of the car and its effects on a driver’s comfort at different velocities is analyzed. An open window at high velocity behaves as a source of specifically strong tonal low frequency noise which is annoying. The interior noise of a passenger car was measured under different conditions; while driving on normal highway and roadways. First, an octave-band analysis was used to assess the noise level and its impact on the driver’s comfort. Second, a Fast Fourier Transform (FFT) analysis was used for the detection of tonal low frequency noise. Finally, the paper suggests possibilities for scientifically assessing and evaluating low frequency noise but not only for the presented source of the sound.
Noise measurements have been carried out at eleven different sites located in three prominent cities of the Tarai region of India to evaluate the effectiveness of vegetation belts in reducing traffic noise along the roadsides. Attenuation per doubling of distance has been computed for each site and excess attenuation at different 1/3 octave frequencies has been estimated. The average excess attenuation is found to be approximately 15 dB over the low frequencies (200 Hz to 500 Hz) and between 15 dB to 20 dB over the high frequencies (8 kHz to 12.5 kHz). Over the critical middle frequencies (1-4 kHz), the average excess attenuation (between 10-15 dB) though not as high, is still significant, with a number of sites showing an excess attenuation of 15 dB or more at 1 kHz. The results indicate that sufficiently dense vegetation belts along the roadsides may prove as effective noise barriers and significant attenuation may be achieved over the critical middle frequencies (1-4 kHz).