The increment in the number of automobiles and the densification of the city has increased noise pollution rates. In addition, the lack of regulation in Chile regarding the acoustic insulation of façades is a problem of a growing concern. The main objective of the present study was to obtain a model of the Sound Insulation of housing, façades, stratified in Santiago, Chile, based on constructive variables. It is expected to serve as a basis for one future regulation for acoustic façades of houses. In the present study, tests based on the international ISO 140-5 standard were carried out in situ. An estimation model of the Standardized Level Difference Dls,2m,nT,w + C, was obtained based on the opening/façade proportion, and the type of glass used for the windows.
Acoustic quality of a classroom is a term proposed to describe acoustic properties that contribute to a subjective impression received by a human, such as speech intelligibility, external noise, or vocal effort. It is especially important in classrooms, where suitable conditions should be provided to convey verbal content to students, taking into account their age. The article presents a method for assessing the acoustic quality of classrooms based on a single number global index and taking into account a number of factors affecting the outcome of the assessment. Partial indices are presented and their weights are proposed based on an analysis of factors determining whether a room meets applicable acoustic requirements. Results of the assessment of the acoustic quality carried out with the use of the developed method in selected classrooms are also presented.
The publication presents the comparison of selected refining methods (gaseous and/or flux) based on mechanical properties of the obtained secondary silumin EN AC-AlSi7Mg0.3 (in accordance to the European Standard PN-EN 1706:2011). The point of reference was a similar primary alloy produced using pure batch materials. The mechanical properties measured in room temperature were used to calculate the materials quality index. The research showed, that properly carried out refinement process of secondary (recycled) alloys can bring their quality indexes close to those of their primary materials. The goal was to assess the efficiency of selected refining methods when applied to the examined group of casting silumins, by measuring the basic mechanical properties (in room temperature) before and after refining. The practical aspect was to choose an effective (ecologically, technologically and economically) method of refining of secondary EN AC-AlSi7Mg0.3 alloy used to cast car rims for JN METAL company in Ostowiec Świętokrzyski (Poland).
Several authors have proposed indices to synthesize the acoustics of a space, especially of concert halls. Meanwhile, a few studies have focused on the acoustics of worship spaces. The peculiarities of these last ones have shown distinctive characteristics. The increasing interest for the acoustics of worship spaces justifies the formulation of indices to synthesize the results of acoustic studies in these buildings too. This paper proposes a double synthetic index to evaluate the acoustics of a church. The index is obtained combining the average values of seven parameters generally considered in studies of architectural acoustics. The differences between requirements for music and speech in churches suggest to consider different optimal values of the selected parameters for different kinds of sound. A double synthetic index has been defined to synthesize the acoustical properties related to the music and to the speech separately. The validity of this double index is then assessed, comparing its values with subjective preferences captured through listening tests. The index, which is proposed and validated in this paper, aims to be an instrument to show synthetically the acoustical characteristics of a church to people with low knowledge in acoustics.
A356 is one of the widely used aluminium casting alloy that has been used in both sand and die casting processes. Large amounts of scrap metal can be generated from the runner systems and feeders. In addition, chips are generated in the machined parts. The surface area with regard to weight of chips is so high that it makes these scraps difficult to melt. Although there are several techniques evolved to remedy this problem, yet the problem lies in the quality of the recycled raw material. Since recycling of these scrap is quite important due to the advantages like energy saving and cost reduction in the final product, in this work, the recycling efficiency and casting quality were investigated. Three types of charges were prepared for casting: %100 primary ingot, %100 scrap aluminium and fifty-fifty scrap aluminium and primary ingot mixture were used. Melt quality was determined by calculating bifilm index by using reduced pressure test. Tensile test samples were produced by casting both from sand and die moulds. Relationship between bifilm index and tensile strength were determined as an indication of correlation of melt quality. It was found that untreated chips decrease the casting quality significantly. Therefore, prior to charging the chips into the furnace for melting, a series of cleaning processes has to be used in order to achieve good quality products.
The formation of oxide film on the surface of aluminium melts, i.e. bifilms, are known to be detrimental when they are incorporated into the cast part. These defects causes premature fractures under stress, or aid porosity formation. In this work, Al-12 Si alloy was used to cast a step mould under two conditions: as-received and degassed. In addition, 10 ppi filters were used in the mould in order to prevent bifilm intrusion into the cast part. Reduced pressure test samples were collected for bifilm index measurements. Samples were machined into standard bars for tensile testing. It was found that there was a good agreement with the bifilm index and mechanical properties.
A new approach to acoustic quality assessment of churches during simulation tests is proposed in the article. The numerical global index, based on four partial indices: reverberation, speech intelligibility, music sound index and a proposed new one - sound strength index, assesses the acoustic parameters of the model of the tested church in a complex manner. The global single number index was obtained from 17 simulations of acoustic adaptation options of the investigated church's interior. The equation of the approximate global index has been obtained by means of singular vectors, obtained from Singular Value Decomposition (SVD) of the Index Observation Matrix of Simulation Variants (IOMSV). The weights of four partial indices and a universal equation of the global index have been calculated using the SVD technique to solve the problem of correlated acoustical parameters. The global index may be a helpful tool during simulation tests of acoustic quality assessment of churches. The proposed final equation of the global index does not require knowledge of the SVD technique and the values of acoustic parameters preferred for churches. Therefore the methodology proposed is easily applicable.
The paper presents an innovative approach for the index assessment of the acoustic properties of churches. A new formula for an approximate single number index to assess selected acoustic parameters of church interiors, such as reverberation time (RT), speech intelligibility index (RASTI) and music clarity index (C80), is presented in the paper. The formula is created by means of the Singular Value Decomposition (SVD) method. An innovative approach for calculating the weights of partial indices is shown by solving the problem of redundant information, i.e., the system of overdetermined linear equations, using a computed pseudoinverse matrix. The new procedures for calculating the values of three partial indices and the single number index to assess selected acoustic parameters are presented. The proposed method was verified by measurements in several selected churches.
In parallel with research conducted using conventional methods, a uniform index method for assessing the acoustic quality of Roman Catholic churches has been developed. The latest version of the index method has been created using the index observation matrix of 12 churches which have been rated by means of the single number global index. Assessments of the acoustic quality of any Roman Catholic church, using two calculation models: the Global Acoustic Properties Index (GAP) and the Global Index (GI), are shown in the article. The verification was performed on the example of one church, showing the way of calculating global indices to assess the acoustic quality of a new facility. The next stages in the development of the index method for assessing the acoustic quality of churches were taking into account the audience, using simulation tests and determining the spatial distribution of the single number GAP index in an examined church. An attempt to use the GAP and GI calculation models to assess the acoustic properties of some churches is also shown in the article.
Issues connected with high quality casting alloys are important for responsible construction elements working in hard conditions. Traditionally, the quality of aluminium casting alloy refers to such microstructure properties as the presence of inclusions and intermetallic phases or porosity. At present, in most cases, Quality index refers to the level of mechanical properties – especially strength parameters, e.g.: UTS, YS, HB, E (Young’s Modulus), K1c (stress intensity factor). Quality indexes are often presented as a function of density. However, generally it is known, that operating durability of construction elements depends both on the strength and plastic of the material. Therefore, for several years now, in specialist literature, the concept of quality index (QI) was present, combines these two important qualities of construction material. The work presents the results of QI research for casting hypoeutectic silumin type EN AC-42100 (EN AC-AlSi7Mg0.3), depending on different variants of heat treatment, including jet cooling during solution treatment.
The study presents the results of the investigations of the effect of Cu, Ni, Cr, V, Mo and W alloy additions on the microstructure and mechanical properties of the AlSi7Mg0.3 alloy. The examinations were performed within a project the aim of which is to elaborate an experimental and industrial technology of producing elements of machines and devices complex in their construction, made of aluminium alloys by the method of precision investment casting. It was demonstrated that a proper combination of alloy additions causes the crystallization of complex intermetallic phases in the silumin, shortens the SDAS and improves the strength properties: Rm, Rp0.2,HB hardness. Elevating these properties reduces At, which, in consequence, lowers the quality index Q of the alloy of the obtained casts. Experimental casts were made in ceramic moulds preliminarily heated to 160 °C, into which the AlSi7Mg0.3 alloy with the additions was cast, followed by its cooling at ambient temperature. With the purpose of increasing the value of the quality index Q, it is recommended that the process of alloy cooling in the ceramic mould be intensified and/or a thermal treatment of the casts be performed (ageing)(T6).
The evaluation accuracies of rock mass structures based on the ratings of the Rock Quality Designation (RQD) and discontinuity spacing (S) in the Rock Mass Rating (RMR) system are very limited due to the inherent restrictions of RQD and S. This study presents an improvement that replaces these two parameters with the modified blockiness index (Bz) in the RMR system. Before proceeding with this replacement, it is necessary for theoretical model building to make an assumption that the discontinuity network contains three sets of mutually orthogonal disc-shaped discontinuities with the same diameter and spacing of discontinuities. Then, a total of 35 types of theoretical DFN (Discrete Fracture Network) models possessing the different structures were built based on the International Society for Rock Mechanics (ISRM) discontinuity classification (ISRM, 1978). In addition, the RQD values of each model were measured by setting the scanlines in the models, and the Bz values were computed following the modified blockiness evaluation method. Correlations between the three indices (i.e., Bz, RQD and S) were explored, and the reliability of the substitution was subsequently verified. Finally, RMR systems based on the proposed method and the standard approach were applied to real cases, and comparisons between the two methods were performed. This study reveals that RQD is well correlated with S but is difficult to relate to the discontinuity diameter (D), and Bz has a good correlation with RQD/S. Additionally, the ratings of RQD and S are always far from the actual rock mass structure, and the Bz ratings are found to give better characterizations of rock mass structures. This substitution in the RMR system was found to be acceptable and practical.
In the study suitability of water quality index approach and environmetric methods in fi ngerprinting heavy metal pollution as well as comparison of spatial variability of multiple contaminants in surface water were assessed in the case of The Gediz River Basin, Turkey. Water quality variables were categorized into two classes using factor and cluster analysis. Furthermore, soil contamination index was adapted to water pollution index and used to fi nd out the relative relationship between the reference standards and the current situation of heavy metal contamination in water. Results revealed that surface water heavy metal content was mainly governed by metal processing, textile and tannery industries in the region. On the other hand, metal processing industry discharges mainly degraded quality of water in Kemalpasa and Menemen. Furthermore, Kemalpasa region has been heavily affected from tannery and textile industries effl uents. Moreover, pollution parameters have not been infl uenced by changes in physical factors (discharge and temperature). This study indicated the effectiveness of water quality index approach and statistical tools in fi ngerprinting of pollution and comparative assessment of water quality. Both methods can assist decision makers to determine priorities in management practices.