The aim of this study was to establish reference values for 2D and M-mode measurements in Dachshunds. Basic echocardiographic data, including M-mode, 2D and spectral Doppler measurements, was collected, analyzed and compared between 41 healthy Dachshunds and 50 other healthy dogs of similar weight. Echocardiographic reference intervals were prepared for Dachshunds. Dachshunds had a smaller left ventricular diameter in diastole and systole and a thicker septum than other dog breeds. Male Dachshunds had larger diastolic and systolic left ventricular diameter than females. Reference intervals for 2D and M-mode measurements in healthy Dachshunds differ from other dogs of similar weight and should be used for this breed to assess chamber enlargement.
The author discusses the problem of reference of (nominal, verbal, adjectival groups, and adverbial) sentence components realized within coordinate relationships. Initially, the author refers to the theory of compactness as an explanation of the processes of generating coordinate constructions in the structure of simple sentences. There are evidences in favor of the thesis that the compactness theory does not explain coordination in semantic aspect. This applies not only to the structure with the main predicate with plural distribution (valence), but also to the entire range of coordination. The author distinguishes two types of references of coordinated phrases (in structure of a simple sentence): a distributional and a collective one. The constructional and semantic peculiarities of the expressions of both types have been described in relation to the contemporary Polish and Russian language.
Reference intervals (RIs) are one of the essential elements in the procedure of disease diagnosis. This is especially true for feline species in which RI is less available than in canine species. RIs are affected by biological, geographical and instrumental factors, yet published RIs with incomplete background are popularly used. Inappropriate interpretations of RIs may affect classification of disease and subsequent treatment. In this study, we demonstrated the step-by-step establishment of feline RIs following the American Society for Veterinary Clinical Pathology (ASVCP) reference interval guideline. A total of 51 parameters were examined, including 20 hematology and 31 biochemistry parameters, and the results were compared to one local RI and two foreign RIs. Overall, about 29% (10/35) of tested parameters were different form local RIs and 60% (30/50) were different from the two foreign RIs, highlighting geographical variations. A higher upper reference limit (URL) in red blood cell count (RBC), hematocrit (Hct), Hemoglobin (Hgb), albumin, creatinine and lower URL in potassium and white blood cell count (WBC) were identified, which may impact the interpretation. In addition, statistical analysis of age and gender were factored separately and indicated that 10 parameters were significantly higher in the adult group. For the impact of gender, percentage of basophil and total iron-binding capacity (TIBC) were lower in female and male cats, respectively. In conclusion, we have demonstrated that it is desirable to establish in-house RIs or RIs of local sources. An age specific RI for the geriatric feline population is advisable for better diagnosis and monitoring the disease.
Research activities of Polish research groups in a period of 2015–2019 on reference frames and reference networks are reviewed and summarised in this paper. The summary contains the results concerning the implementation of latest resolutions on reference systems of the International Union of Geodesy and Geophysics and the International Union of Astronomy with special emphasis on the changes in the Astronomical Almanac of the Institute of Geodesy and Cartography, Warsaw. It further presents the status of the implementation of the European Terrestrial Reference System 1989 (ETRS89) in Poland, monitoring the terrestrial reference frame, operational work of GNSS permanent IGS/EPN stations in Poland, operational work of the laser ranging station in Poland of the International Laser Ranging Service (ILRS), active GNSS station network for the realization of ETRS89 in Poland, validation of recent ETRS89 realization, expressed in ETRF2000 in Poland, and maintenance of the vertical control in Poland (PL-KRON86-NH). Extensive research activities are observed in the field of maintenance and modernization of gravity control not only in Poland, but also in Sweden and in Denmark, as well as establishment of gravity control in Ireland based on absolute gravity survey. The magnetic control in Poland was also regularly maintained. The bibliography of the related works is given in references.
Technical development, new applications and requests for increased accuracy in georeferencing are setting new demands for accuracy and reliability of reference frames. Due to crustal deformations and local movements of benchmarks, a static reference network deteriorates with time, thus eventually requiring update of the whole system. Technically, renewal of a reference frame is straightforward and should be done whenever enough new data or updated information exist to get an improvement in accuracy. An example is the International Terrestrial Reference Frame, ITRF, which is renewed regularly. The situation is more complicated with national reference frames which may have been given a legal status, and parameters defined by the national legislation. Even without that, renewal and implementation of such a frame is a multi-million euro project taking years to complete. Crustal deformations and movements deteriorate static reference frames (defined by fixed/static coordinates of benchmarks) with time. Eventually, distortions in a static reference frame will become bigger than the uncertainties of GNSS measurements, thus deteriorating the obtainable accuracy of the measurement technique. Instead of a static reference frame, one can use semi-kinematic or kinematic approach where either the transformation from global to the national reference frame or the coordinates of reference frame benchmarks are time-dependent. In this paper we give a short overview of the topic, and discuss on technical issues and future aspects of the reference frames in the viewpoint of National Mapping and Cadastre Authorities (NMA) with an example on the national strategy in Finland.
Figuig Berber (eastern Morocco) has a large number of deictic constructions. Among these, a construction with a preposed pronominal element followed by a genitival phrase is by far the most common. All deictic constructions use a basic contrast between two elements: -u and -ənn. In exophoric deixis, the former has proximal interpretation, while the latter has distal interpretation. In endophoric deixis, the situation is more complicated. For some speakers, only constructions with -ənn are permitted in this use, while other speakers use both constructions with -u and -ənn, without clear contrast. In the article, emphasis is laid on when endophoric deictic marking is used, and when it is absent. In principle, such marking shows that the referent has already been mentioned in the previous context, and can be regarded anaphoric. However, in such situations, it is still possible not to mark the noun. This is mainly the case when there is only one potential referent in a given situation, as, for example, in the case of kings, or as is often the case with nouns modified by a genitival phrase.
The summary of research activities concerning reference frames and reference networks performed in Poland in a period of 2011–2014 is presented. It contains the results of research on implementation of IUGG2011 and IAU2012 resolutions on reference systems, implementation of the ETRS89 in Poland, operational work of permanent IGS/ EUREF stations in Poland, operational work of ILRS laser ranging station in Poland, active GNSS station networks in Poland, maintenance of vertical control in Poland, maintenance and modernization of gravity control, and maintenance of magnetic control in Poland. The bibliography of the related works is given in references.
The DiSTFA method (Displacements and Strains using Transformation and Free Adjustment) was presented in Kamiński (2009). The method has been developed for the determination of displacements and strains of engineering objects in unstable reference systems, as well as for examining the stability of reference points. The DiSTFAG (Gross errors) method presented in the paper is the extension of the DiSTFA method making it robust to gross errors. Theoretical considerations have been supplemented with an example of a practical application on a simulated 3D surveying network.
The article presents results of comparative tests performed to verify the conformity of geometric deviation measurements of a crankshaft carried out at a test bed equipped with a system of elastic support with measurements adopted as reference values. A number of simulation tests were carried out with varied shaft support conditions using the proposed measuring system. The selection criteria were established for support parameters. Meeting these criteria guarantees that shaft elastic deflections and strains are eliminated. Consequently, such strains will not affect the estimation of geometrical deviations of the measured object. The comparative evaluation measurement of roundness profiles and values of roundness deviations of main crankshaft bearing journals of a marine medium speed engine was performed using a correlation calculus. The results have revealed high conformity of both determined roundness deviation values and measured profiles compared to the reference ones.
In this paper distortion of surface topography measurement results by improper selection of the reference plane is taken into consideration. The following types of surfaces from cylindrical elements were analyzed: cylinder liners after plateau honing, cylinder liners with additionally burnished oil pockets and turned piston skirts. Surface topographies of these elements after a low wear process were also studied. In order to obtain areal surface topography parameters, the form was eliminated using cylinders and polynomials of the following degrees: 2, 3, 4, 6, 8, 10 and 12. Parameters of surfaces after form removal were compared. After analysis of results the reference elements for each kind of surface were recommended. A special procedure was proposed in order to select the degree of a polynomial. This method is based on surface topography changes with increase of polynomial degree. The effect of improper form elimination on measuring uncertainty was studied.
The main goal of this article is to characterise and compare some aspects of Hilary Putnam’s referential theory of meaning and Robert B. Brandom’s inferential theory of meaning. I will do it to indicate some similarities and differences in these theories. It will provide an opportunity for a deeper understanding of these theories and for a more adequate evaluation of how they describe and explain the process of meaning acquisition of linguistic expressions. In his theory of meaning Putnam emphasises the importance of reference understood as a relationship which connects linguistic expressions and extra-linguistic (empirical) reality. Brandom acknowledges inference as a main category useful in characterising the meaning of expressions used in premises and a conclusion of inference. But his theory of meaning is criticised for minimalising the role of an empirical component (demonstratives etc.). He tries to defend his standpoint in the anaphoric theory of reference. Putnam like Brandom claimed that we – as cognitive subjects – are not in a situation in which we learn about the extra-linguistic reality in a direct way. It is the reality itself as well as our cognitive apparatus that play a role in a cognitive process.
This paper presents a study of control strategies for 5-phase permanent magnet synchronous motors (PMSMs) supplied by a five-leg voltage source inverter. Based on the vectorial decomposition of the multi-phase machine, fictitious machines, magnetically decoupled, allow a more adequate control. In this paper, our study focuses on the vector control of a multi-phase machine using a linear proportional-integral-derivative (PID) current regulator in the cases of sinusoidal and trapezoidal back-electromotive force (EMF) waveforms. In order to determine currents’ references, two strategies are adopted. First one aims to minimize copper losses under constant torque, while the second one targets to increase torque for a given copper losses. These techniques are tested under a variable speed control strategy based on a proportional-integral (PI) regulator and experimentally validated.
Background concentrations of main trace elements and polycyclic aromatic hydrocarbons (PAHs) were investigated in pristine soils of the Beliy Island situated in the Kara Sea, Yamal autonomous region, North-West Siberia, Russia. Belyi Island is considered as reference landscpae for further investigation of soil polychemical contamination of the Yamal region. Three plots with different functional load (mature ecosystem, occasionally and permanently affected plots) were investigated with aim to evaluate the trend of long term polychemical effect on Stagnic Cryosols - benchmark soil type of the Yamal region. Accumulation of trace elements was not fixed in all soils investigated due to absence of direct sources of heavy metals on the territory of the Beliy Island. At the same time, there were essential alterations of PAHs fractional composition and content due to pronounced accumulation of the petroleum products combustion in the vicinity of the permanent meteorological station and former seasonal field base. The most intensive and statistically significant accumulation was noted for phenanthrene, anthracene, benzo[k]fluoranthene and benzo[a]pyrene. This indicates accumulation of the PAHs in soils, affected by the anthropogenic activity on the meteorological station. The most pronounced differences were revealed for the superficial layer of 0-5 cm. Deeper horizons of soil did not show accumulation of contaminants. Data obtained can be used for organization of further monitoring of contamination of soils and landscapes in Yamal as developing and industrial region.
Surface topography assessments with valley exploration are of great importance. Two-process surfaces are often proposed for many combustion engines. One of the errors committed in surface topography measurements and analysis are those that occur during data processing. In this paper, improper areal form removal was taken into consideration for plateau-honed cylindrical surfaces with additionally burnished oil pockets. Usually, the reference plane is established by application of: fitting algorithms (e.g. cylindrical shape), polynomials, filters and other procedures. In many cases, the influence of the reference plane was not fully recognized during valley depth consideration. Moreover, the influence of areal form removal with edge-to-dimple and valley‑to-dimple distances was not precisely defined. In this research, commonly used algorithms for form separation in surface topography analysis were proposed for the applications being considered. The digital filter bandwidth was also specified for valley depth analysis. The distortion of edge‑located oil pockets was specified. It was assumed that application of robust techniques does not necessarily provide the desired results.
The multi-stimulus test with hidden reference and anchors (MUSHRA) is commonly used for subjective quality assessment of audio systems. Despite its wide acceptance in scientific and industrial sectors, the method is not free from bias. One possible source of bias in the MUSHRA method may be attributed to a graphical design of its user interface. This paper examines the hypothesis that replacement of the standard multi-slider layout with a single-slider version could reduce a stimulus spacing bias observed in the MUSHRA test. Contrary to the expectation, the aforementioned modification did not reduce the bias. This outcome formally supports the validity of using multiple sliders in the MUSHRA graphical interface.