The paper presents national report of Poland for IAG on positioning and applications. The selected research presented was carried out at leading Polish research institutions and concern precise multi-GNSS satellite positioning – relative and absolute – and also GNSS-based ionosphere and troposphere modelling and studies. The research resulted in noticeable advancements in these subjects confirmed by the development of new algorithms and methods. New and improved methods of precise GNSS positioning were developed, and also GNSS metrology was studied. New advanced troposphere models were presented and tested. In particular, these models allowed testing IPW variability on regional and global scales. Also, new regional ionosphere monitoring web-based services were developed and launched.
The paper presents a summary of research activities concerning theoretical geodesy performed in Poland in the period of 2011–2014. It contains the results of research on new methods of the parameter estimation, a study on robustness properties of the M-estimation, control network and deformation analysis, and geodetic time series analysis. The main achievements in the geodetic parameter estimation involve a new model of the M-estimation with probabilistic models of geodetic observations, a new Shift-M split estimation, which allows to estimate a vector of parameter differences and the Shift- M split (+) that is a generalisation of Shift- M split estimation if the design matrix A of a functional model has not a full column rank. The new algorithms of the coordinates conversion between the Cartesian and geodetic coordinates, both on the rotational and triaxial ellipsoid can be mentioned as a highlights of the research of the last four years. New parameter estimation models developed have been adopted and successfully applied to the control network and deformation analysis. New algorithms based on the wavelet, Fourier and Hilbert transforms were applied to find time-frequency characteristics of geodetic and geophysical time series as well as time-frequency relations between them. Statistical properties of these time series are also presented using different statistical tests as well as 2 nd , 3 rd and 4 th moments about the mean. The new forecasts methods are presented which enable prediction of the considered time series in different frequency bands.
Climate atlases summarize large sets of quantitative and qualitative data and are results of complex analytical cartographic work. These special geographical publications summarize long term meteorological observations, provide maps and figures which characterise different climate elements. Visual information is supplemented with explanatory texts. A lot of information on short and long term changes of climate elements were provided in published Lithuanian atlases (Atlas of Lithuanian SDR, 1981; Climate Atlas of Lithuania, 2013), as well as in prepared but unpublished Lithuanian Atlas (1989) and in upcoming new national atlas publications (National Atlas of Lithuania. 1 st part, 2014). Climate atlases has to be constantly updated to be relevant and to describe current climate conditions. Comprehensive indicators of Lithuanian climate are provided in different cartographic publications. Different time periods, various data sets and diverse cartographic data analysis tools and visualisation methods were used in these different publications.
The purpose of this study was to determine the spatial structure of vegetation on the repository of the mine “Fryderyk” in Tarnowskie Góry. Tested area was located in the Upper Silesian Industrial Region (a large industrial region in Poland). It was a unique refuge habitat – Natura2000; PLH240008. The main aspect of this elaboration was to investigate the possible use of geotechniques and generally available geodata for mapping LULC changes and determining the spatial structure of vegetation. The presented study focuses on the analysis of a spatial structure of vegetation in the research area. This exploration was based on aerial images and orthophotomaps from 1947, 1998, 2003, 2009, 2011 and airborne laser scanning data (2011, ISOK project). Forest succession changes which occurred between 1947 and 2011 were analysed. The selected features of vegetation overgrowing spoil heap “Fryderyk” was determined. The results demonstrated a gradual succession of greenery on soil heap. In 1947, 84% of this area was covered by low vegetation. Tree expansion was proceeding in the westerly and northwest direction. In 2011 this canopy layer covered almost 50% of the research area. Parameters such as height of vegetation, crowns length and cover density were calculated by an airborne laser scanning data. These analyses indicated significant diversity in vertical and horizontal structures of vegetation. The study presents some capacities to use airborne laser scanning for an impartial evaluation of the structure of vegetation.
The summary of research activities concerning reference frames and reference networks performed in Poland in a period of 2011–2014 is presented. It contains the results of research on implementation of IUGG2011 and IAU2012 resolutions on reference systems, implementation of the ETRS89 in Poland, operational work of permanent IGS/ EUREF stations in Poland, operational work of ILRS laser ranging station in Poland, active GNSS station networks in Poland, maintenance of vertical control in Poland, maintenance and modernization of gravity control, and maintenance of magnetic control in Poland. The bibliography of the related works is given in references.
Image sequences, in particular digital video sequences, are characterised by the features which result in their high potential as measurement data. However, as early as at the stage of visual assessment of digital film images, originating, in particular, from amateur cameras, occurrence of some deformations may be observed, which may highly influence the results of measurements performed using these images; such deformations differ from deformations occurred in the case of static photographic images. It results both, by the method of image recording, using an electronic shutter and interlaced or progressive scanning, as well as the method of file recording and compression. It is worth to notice the systematic nature of such deformations, which highly depend on mutual motions of a camera and recorded objects. The objective of presented research works was to develop the mathematical description of image deformations, as a function of motion parameters. This would allow for adaptation of the camera calibration process to the demands of sequential imaging, as well as for modification of algorithms of measurements using self-calibration, and, as a result, minimisation of deformations. Another objective was to analyse the influence of deformations, typical for digital film images, on the results of measurements performed using these images, by means of series of experiments, which were based on multiple calibration of static and a moving camera, also with the use of a spatial test field. The first part was made by developing formulas based on some geometric relations, using some simplifications. On the stage of experimental research a certain degree of compatibility of experimental results and theoretical assumptions were confirmed.
The coastal zone and estuaries of Quang Ninh and Hai Phong have great potential not only for economic development but also for protection and conservation of biodiversity and ecosystem. Nowadays, due to industrial, agricultural and anthropogenic activities signs of water pollution in the region have been found. The level of surface water pollution can be determined by traditional methods through observatory stations. However, a traditional approach to determine water contamination is discontinuous, and thereby makes pollution assessment of the entire estuary very difficult. Nowadays, remote sensing technology has been developed and widely applied in many fields, for instance, in monitoring water environments. Remote sensing data combined with information from in-situ observations allow for extraction of polluted components in water and accurate measurements of pollution level in the large regions ensuring objectivity. According to results obtained from Spot-5 imagery of Quang Ninh and Hai Phong, the extracted pollution components, like BOD, COD and TSS can be determined with the root mean square error, the absolute mean error and the absolute mean percentage error (%): ±4.37 (mg/l) 3.86 (mg/l), 27%; ±55.32 (mg/l), 48.30 (mg/l), 14%; and ±32.90 (mg/l), 23.38 (mg/l), 28%; respectively. Obtained outcomes guarantee objectivity in assessing water contaminant levels in the investigated regions and show the advantages of remote sensing applications in Resource and Environmental Monitoring in relation to Water – Air – Land.
The summary of research activities concerning gravity field modelling and gravimetric works performed in Poland in the period of 2011–2014 is presented. It contains the results of research on geoid modelling in Poland and other countries, evaluation of global geopotential models, determination of temporal variations of the gravity field with the use of data from satellite gravity space missions, absolute gravity surveys for the maintenance and modernization of the gravity control in Poland and overseas, metrological aspects in gravimetry, maintenance of gravimetric calibration baselines, and investigations of the non- tidal gravity changes. The bibliography of the related works is given in references.
Efficient, accurate data collection from imagery is the key to an economical generation of useful geospatial products. Incremental developments of traditional geospatial data collection and the arrival of new image data sources cause new software packages to be created and existing ones to be adjusted to enable such data to be processed. In the past, BAE Systems’ digital photogrammetric workstation, SOCET SET ® , met fi n de siècle expectations in data processing and feature extraction. Its successor, SOCET GXP ® , addresses today’s photogrammetric requirements and new data sources. SOCET GXP is an advanced workstation for mapping and photogrammetric tasks, with automated functionality for triangulation, Digital Elevation Model (DEM) extraction, orthorectification and mosaicking, feature extraction and creation of 3-D models with texturing. BAE Systems continues to add sensor models to accommodate new image sources, in response to customer demand. New capabilities added in the latest version of SOCET GXP facilitate modeling, visualization and analysis of 3-D features.
The quarrying industry is changing the local landscape, forming deep open pits and spoil heaps in close proximity to them, especially lignite mines. The impact can include toxic soil material (low pH, heavy metals, oxidations etc.) which is the basis for further reclamation and afforestation. Forests that stand on spoil heaps have very different growth conditions because of the relief (slope, aspect, wind and rainfall shadows, supply of solar energy, etc.) and type of soil that is deposited. Airborne laser scanning (ALS) technology deliver point clouds (XYZ) and derivatives as raster height models (DTM, DSM, nDSM=CHM) which allow the reception of selected 2D and 3D forest parameters (e.g. height, base of the crown, cover, density, volume, biomass, etc). The automation of ALS point cloud processing and integrating the results into GIS helps forest managers to take appropriate decisions on silvicultural treatments in areas with failed plantations (toxic soil, droughts on south-facing slopes; landslides, etc.) or as regular maintenance. The ISOK country-wide project ongoing in Poland will soon deliver ALS point cloud data which can be successfully used for the monitoring and management of many thousands of hectares of destroyed post-industrial areas which according to the law, have to be afforested and transferred back to the State Forest.
This paper presents the summary of research activities carried out in Poland in 2011–2014 in the field of Earth rotation and geodynamics by several Polish research institutions. It contains a summary of works on Earth rotation, including evaluation and prediction of its parameters and analysis of the related excitation data as well as research on associated geodynamic phenomena such as geocentre motion, global sea level change and hydrological processes. The second part of the paper deals with monitoring of geodynamic phenomena. It contains analysis of geodynamic networks of local, and regional scale using space (GNSS and SLR) techniques, Earth tides monitoring with gravimeters and water-tube hydrostatic clinometer, and the determination of secular variation of the Earth’ magnetic field.
The aim of this study was to investigate the possible use of geoinformatics tools and generally available geodata for mapping land cover/use on the reclaimed areas. The choice of subject was dictated by the growing number of such areas and the related problem of their restoration. Modern technology, including GIS, photogrammetry and remote sensing are relevant in assessing the reclamation effects and monitoring of changes taking place on such sites. The LULC classes mapping, supported with thorough knowledge of the operator, is useful tool for the proper reclamation process evaluation. The study was performed for two post-mine sites: reclaimed external spoil heap of the sulfur mine Machów and areas after exploitation of sulfur mine Jeziórko, which are located in the Tarnobrzeski district. The research materials consisted of aerial orthophotos, which were the basis of on-screen vectorization; LANDSAT satellite images, which were used in the pixel and object based classification; and the CORINE Land Cover database as a general reference to the global maps of land cover and land use.
The Open Skies Treaty has been a peace-building instrument between North American and European nations for over two decades. This agreement is based on the possibility for each country-signatory of the Treaty to independently conduct observation flights and obtain aerial imagery data of the territories of other Treaty States-Parties. This imagery data was originally acquired only using traditional photographic film cameras. Together with the rapid development and advancement of digital sensor technologies, the logical step forward was to amend the Treaty provisions to allow for the use of these types of sensors during observation missions. This paper describes this transition process and highlights a number of technical problems which needed to be addressed by experts working within the Open Skies Consultative Commission workgroups.
The paper addresses the problem of the automatic distortion removal from images acquired with non-metric SLR camera equipped with prime lenses. From the photogrammetric point of view the following question arises: is the accuracy of distortion control data provided by the manufacturer for a certain lens model (not item) sufficient in order to achieve demanded accuracy? In order to obtain the reliable answer to the aforementioned problem the two kinds of tests were carried out for three lens models. Firstly the multi-variant camera calibration was conducted using the software providing full accuracy analysis. Secondly the accuracy analysis using check points took place. The check points were measured in the images resampled based on estimated distortion model or in distortion-free images simply acquired in the automatic distortion removal mode. The extensive conclusions regarding application of each calibration approach in practice are given. Finally the rules of applying automatic distortion removal in photogrammetric measurements are suggested
The paper presents the capability of applying selected modern remote sensing methods based on commonly available high spatial resolution MODIS images to fog and low layer clouds detection. Single spectral channel images, differential images and selected color compositions are analyzed for distinguishing the areas of the phenomena occurrence. Their internal structure and fog/cloud particles properties are assessed using brightness temperature and reflectance diagrams.