Search results

Filters

  • Journals
  • Date

Search results

Number of results: 19
items per page: 25 50 75
Sort by:

Abstract

The implemented online urban noise pollution monitoring system is presented with regard to its conceptual assumptions and technical realization. A concept of the noise source parameters dynamic assessment is introduced. The idea of noise modeling, based on noise emission characteristics and emission simulations, was developed and practically utilized in the system. Furthermore, the working system architecture and the data acquisition scheme are described. The method for increasing the speed of noise map calculation employing a supercomputer is explained. The practical implementation of noise maps generation and visualization system is presented, together with introduced improvements in the domain of continuous noise monitoring and acoustic maps creation. Some results of tests performed using the system prototype are shown. The main focus is put on assessing the efficiency of the acoustic maps created with the discussed system, in comparison to results obtained with traditional methods.
Go to article

Abstract

Two low-cost methods of estimating the road surface condition are presented in the paper, the first one based on the use of accelerometers and the other on the analysis of images acquired from cameras installed in a vehicle. In the first method, miniature positioning and accelerometer sensors are used for evaluation of the road surface roughness. The device designed for installation in vehicles is composed of a GPS receiver and a multi-axis accelerometer. The measurement data were collected from recorded ride sessions taken place on diversified road surface roughness conditions and at varied vehicle speeds on each of examined road sections. The data were gathered for various vehicle body types and afterwards successful attempts were made in constructing the road surface classification employing the created algorithm. In turn, in the video method, a set of algorithms processing images from a depth camera and RGB cameras were created. A representative sample of the material to be analysed was obtained and a neural network model for classification of road defects was trained. The research has shown high effectiveness of applying the digital image processing to rejection of images of undamaged surface, exceeding 80%. Average effectiveness of identification of road defects amounted to 70%. The paper presents the methods of collecting and processing the data related to surface damage as well as the results of analyses and conclusions.
Go to article

Abstract

A method for precise sound sources detection and localization in interiors is presented. Acoustic vector sensors, which provide multichannel output signals of acoustic pressure and particle velocity were employed. Methods for detecting acoustic events are introduced. The algorithm for localizing sound events in the audience is presented. The system set up in a lecture hall, which serves as a demonstrator of the proposed technology, is described. The accurracy of the proposed method is evaluated by the described measurement results. The analysis of the results is followed by conclusions pertaining the usability of the proposed system. The concept of the multimodal audio-visual detection of events in the audience is also introduced.
Go to article

Abstract

The aim of this paper is two-fold. First, some basic notions on acoustic field intensity and its measurement are shortly recalled. Then, the equipment and the measurement procedure used in the sound intensity in the performed research study are described. The second goal is to present details of the design of the engineered 3D intensity probe, as well as the algorithms developed and applied for that purpose. Results of the intensity probe measurements along with the calibration procedure are then contained and discussed. Comparison between the engineered and the reference commercial probe confirms that the designed construction is applicable to the sound field intensity measurements with a sufficient effectiveness.
Go to article

Abstract

An innovative system designed for the continuous monitoring of acoustic climate of urban areas was presented in the paper. The assessment of environmental threats is performed using online data, acquired through a grid of engineered monitoring stations collecting comprehensive information about the acoustic climate of urban areas. The grid of proposed devices provides valuable data for the purpose of long and short time acoustic climate analysis. Dynamic estimation of noise source parameters and real measurement results of emission data are utilized to create dynamic noise maps accessible to the general public. This operation is performed through the noise source prediction employing a propagation model being optimized for computer cluster implementation requirements. It enables the system to generate noise maps in a reasonable time and to publish regularly map updates in the Internet. Moreover, the functionality of the system was extended with new techniques for assessing noise-induced harmful effects on the human hearing system. The principle of operation of the dosimeter is based on a modified psychoacoustic model of hearing and on the results of research performed with participation of volunteers concerning the impact of noise on hearing. The primary function of the dosimeter is to estimate, in real time, auditory effects which are caused by exposure to noise. The results of measurements and simulations performed by the system prototype are depicted and analyzed. Several cases of long-term and short-term measurements of noise originating from various sources were considered in detail. The presented outcomes of predicted degree of the hearing threshold shift induced during the noise exposure can increase the awareness of harmfulness of excessive sound levels.
Go to article

Abstract

The results of long-term continuous noise measurements in two selected schools are presented in the paper. Noise characteristics were measured continuously there for approximately 16 months. Measurements started eight months prior to the acoustic treatment of the school corridors of both schools. An evaluation of the acoustic climates in both schools, before and after the acoustic treatment, was performed based on comparison of these two periods of continuous measurements. The autonomous noise monitoring stations, engineered at the Multimedia Systems Department of the Gdańsk University of Technology were used for this purpose. Investigations of measured noise, especially its influence on hearing sense, assessed on ground of spectral analyses in critical bands, is discussed. Effects of occupational noise exposure, including the Temporary Threshold Shift simulation, are determined. The correlation of the above said measurement results with respective instantaneous noise levels is discussed, and concluding remarks are presented. Some additional indicators such as air pollution or video analysis aiming at the analysis of corridor occupancy are also measured. It should be remembered that excessive noise, or air pollution may be evidence of a dangerous event and may pose health risks.
Go to article

Abstract

A system setup for measurements of acoustic field, together with the results of 3D visualisations of acoustic energy flow are presented in the paper. Spatial sampling of the field is performed by a Cartesian robot. Automatization of the measurement process is achieved with the use of a specialized control system. The method is based on measuring the sound pressure (scalar) and particle velocity(vector) quantities. The aim of the system is to collect data with a high precision and repeatability. The system is employed for measurements of acoustic energy flow in the proximity of an artificial head in an anechoic chamber. In the measurement setup an algorithm for generation of the probe movement path is included. The algorithm finds the optimum path of the robot movement, taking into account a given 3D object shape present in the measurement space. The results are presented for two cases, first without any obstacle and the other - with an artificial head in the sound field.
Go to article

Abstract

The paper presents functionality and operation results of a system for creating dynamic maps of acoustic noise employing the PL-Grid infrastructure extended with a distributed sensor network. The work presented provides a demonstration of the services being prepared within the PLGrid Plus project for measuring, modeling and rendering data related to noise level distribution in city agglomerations. Specific computational environments, the so-called domain grids, are developed in the mentioned project. For particular domain grids, specialized IT solutions are prepared, i.e. software implementation and hardware (infrastructure adaptation), dedicated for particular researcher groups demands, including acoustics (the domain grid “Acoustics”). The infrastructure and the software developed can be utilized mainly for research and education purposes, however it can also help in urban planning. The engineered software is intended for creating maps of noise threat for road, railways and industrial sources. Integration of the software services with the distributed sensor network enables automatic updating noise maps for a specific time period. The unique feature of the developed software is a possibility of evaluating auditory effects which are caused by the exposure to excessive noise. The estimation of auditory effects is based on calculated noise levels in a given exposure period. The outcomes of this research study are presented in a form of the cumulative noise dose and the characteristics of the temporary threshold shift.
Go to article

This page uses 'cookies'. Learn more