Search results

Filters

  • Journals
  • Authors
  • Keywords
  • Date
  • Type

Search results

Number of results: 354
items per page: 25 50 75
Sort by:

Abstract

Senecavirus A (SVA) the only member of the Senecavirus genus within the Picornaviridae family, is an emerging pathogen causing swine idiopathic vesicular disease and epidemic transient neonatal losses. Here, SVA strain (CH-HNKZ-2017) was isolated from a swine farm exhibiting vesicular disease in Henan Province of Central China. A phylogenetic analysis based on complete genome sequence indicated that CH-HNKZ-2017 was closely related to US-15-40381IA, indica- ting that a new SVA isolate had emerged in China.
Go to article

Abstract

Exploitation of hard coal seams by roadway system is applied by two coal mines in southern Poland in Upper Silesian Basin. It is a secondary mining exploitation carries out in safety pillars of urban areas and shafts within mining areas of closed coal mines. Roadway system is the excavation process of gateways which are made in parallel order leaving coal pillars between them. An optimal width of coal pillar makes roadway stable and reduces subsidence of terrain surface. The article presents results of subsidence simulation caused by partial extraction using empirical and numerical methods on the example of one exploitation field of “Siltech” coal mine. The asymptotic state of subsidence was considered after mining ceased in the study area. In order to simulate of subsidence, numerical model of rock mass and model of Knothe-Budryk theory were calibrated. Simulation of vertical displacements in numerical method was carried out using RS3 program by Rocscience based on finite element method. The assumption was made that model of rock mass is transversely isotropic medium, in which panels were designed according to order of extraction of coal seams. The results of empirical and numerical methods were compared with measured values of subsidence at benchmarks along drawn lines (subsidence profiles).
Go to article

Abstract

In individual dogs, despite good quality of raw sperm, some parameters are significantly changed after thawing, which cannot be predicted. We therefore investigated whether motility parameters objectively obtained by CASA, membrane integrity (MI), cell morphology or a combination are suitable to improve the prediction of bad post-thaw quality. For this purpose 250 sperm analysis protocols from 141 healthy stud dogs, all patients introduced for sperm cryopreservation, were evaluated and a Classification and Regression Tree (CART) -analysis performed. The sperm was routinely collected, analysed, and frozen by using a modified Uppsala system. After thawing, data were routinely examined by using CASA, fluorescent microscopy for membrane integrity (MI) and Hancock’s fixation for evaluation of cell morphology. Samples were sorted by post-thaw progressive motility (P) in good (P > / = 50%, n=135) and bad freezers (P<50%, n=115). Among bad freezers, 73.9% showed in addition post-thaw total morphological abberations of >40% and/or MI <50%. Bad freezers were significantly older than good freezers (p<0.05). Progressive motility (P), velocity curvilinear (VCL), mean coefficient (STR), and linear coefficient (LIN) were potential predictors for post-thaw sperm quality since specifity was best (85.8%) and sensitivity (75.4 %) and accuracy (80.4 %) good. For these objectively measured raw sperm parameters, cut-off values were calculated allowing prediction of bad post-thaw results with high accuracy: P = 83.1 % VCL = 161.3 µm/sec, STR = 0.83 %, and LIN = 0.48 %. Raw sperm samples with values below these cut off values will have below average post-thaw quality with a probability of 85.8%. We conclude that VCL, P, STR and LIN are potential predictors of the outcome of sperm cryopreservation, when combined.
Go to article

Abstract

In this paper, the applications of the multivariate data analysis and optimization on vibration signals from compressors have been tested on the assembly line to identify nonconforming products. The multivariate analysis has wide applicability in the optimization of weather forecasting, agricultural experiments, or, as in this case study, in quality control. The techniques of discriminant analysis and linear program were used to solve the problem. The acceleration and velocity signals used in this work were measured in twenty-five rotating compressors, of which eleven were classified as good baseline compressors and fourteen with manufacturing defects by the specialists in the final acoustic test of the production line. The results obtained with the discriminant analysis separated the conforming and nonconforming groups with a significance level of 0.01, which validated the proposed methodology.
Go to article

Abstract

Successful slogans in Italian political discourse – This paper aims to describe the notion of ‘sloganisation’, with special regard to the fortune and circulation of certain slogans in Italian public discourse. An analysis of their forms, contexts of occurrence (political propaganda, advertising, football supporters) and means of diffusion (street talk, electoral manifestos, traditional and new media) shows an increasing desemantisation of this kind of message. Slogans are routinely used by political parties and are widely quoted, regardless of their ideological content, merely in order to create identification or to increase the polemical attitude of their leader.
Go to article

Abstract

Canine parvovirus (CPV) causes acute gastroenteritis in domestic dogs, cats, and several wild carnivore species. In this study, the full-length VP2 gene of 36 CPV isolates from dogs and cats infected between 2016 and 2017 in Beijing was sequenced and analyzed. The results showed that, in dogs, the new CPV-2a strain was the predominant variant (n = 18; 50%), followed by the new CPV-2b (n = 6; 16.7%) and CPV-2c (n = 3; 8.3%) strains, whereas, among cats, the predominant strain was still CPV-2 (n = 9; 25%). One new CPV-2a strain, 20170320-BJ-11, and two CPV-2c strains, 20160810-BJ-81 and 20170322-BJ-26, were isolated and used to perform experimental infections. Multiple organs of beagles that died tested PCR positive for CPV, and characteristic histopathological lesions were observed in organs, including the liver, spleen, lungs, kidneys, small intestines, and lymph nodes. Experimental infections showed that the isolates from the epidemic caused high morbidity in beagles, indicating their virulence in animals and suggesting the need to further monitor evolution of CPV in China.
Go to article

Abstract

The human voice is one of the basic means of communication, thanks to which one also can easily convey the emotional state. This paper presents experiments on emotion recognition in human speech based on the fundamental frequency. AGH Emotional Speech Corpus was used. This database consists of audio samples of seven emotions acted by 12 different speakers (6 female and 6 male). We explored phrases of all the emotions – all together and in various combinations. Fast Fourier Transformation and magnitude spectrum analysis were applied to extract the fundamental tone out of the speech audio samples. After extraction of several statistical features of the fundamental frequency, we studied if they carry information on the emotional state of the speaker applying different AI methods. Analysis of the outcome data was conducted with classifiers: K-Nearest Neighbours with local induction, Random Forest, Bagging, JRip, and Random Subspace Method from algorithms collection for data mining WEKA. The results prove that the fundamental frequency is a prospective choice for further experiments.
Go to article

Abstract

The article is devoted to personal nouns with suffi x -ant in Polish and Belarusian. The lexical and semantic analysis of the studied group of words showed that in both languages they belong to the literary variety of language, however, numerous nouns represent rare vocabulary, sometimes characterized stylistically. The overwhelming majority of names defi nes the names of active contractors of activities, less often – passive contractors, and least frequently – names of owners. In addition, the nomina masculina with suffi x -ant belong to the attributive names, defi ning people on the basis of their character traits, tendencies, and often vices. The s tudied lexis include archaic or colloquial derivatives. Among the specialist words, there were examples representing such fi elds as law and judiciary, economics and trade, religion and art, education and science.
Go to article

Abstract

Spitsbergen glaciers react rapidly to changes in the polar environment, which is expressed in differences in extent of their fronts and surface geometry. The Scott Glacier, which is situated in the NW part of Wedel Jarlsberg Land, is an example of the glacier that has undergone almost continuous recession since the Little Ice Age, interrupted by surges. The variations in recession are characterised based on multiannual data with particularly consideration of the period 1990–2005 and the season 2005/2006. Acceleration of front recession and lowering the surface was found only within the tongue up to a height of about 220 m a.s.l. Whereas, in the area situated in the zone of rock steps and above in the ablation zone, the change of glacier surface ablation (Dh) has been recorded compared to the mean annual recession for the period 1990–2005. Moreover, for the upper firn field, the positive surface ablation (DhS7 = +0.19 m) was observed. As the result of progressive reduction of the Scott Glacier mass, with the participation of other factors (bedrock relief among others), new surfaces of roche moutonnée are uncovering particularly in the tongue zone.
Go to article

Abstract

The paper presents a spatial distribution of changes of air temperature (T) in the Arctic. Estimates of their spatial relations in the study region were based on a correlation analysis. T in the Arctic is most strongly correlated spatially in winter and spring, and least in summer. The radius of extent of statistically significant correlation coefficients of changes of T at the stations Svalbard Lufthavn, Ostrov Kotelny and Resolute A is equal to 2000-2500 km in winter and 1500-2000 km in summer. An attempt was done to delimit the regions of consistent occurrence of the anomalies T with respect to the signs and magnitudes, as well as of the regions with the most coherent T. The Wroclaw dendrite method was used to solve this problem. Relations of the mean areał T of the climatic regions and of the Arctic as a whole, with the northern hemisphere of temperature and selected climatic factors are presented.
Go to article

Abstract

Fractal analysis is one of the rapidly evolving branches of mathematics and finds its application in different analyses such as pore space description. It constitutes a new approach to the issue of their natural irregularity and roughness. To be properly applied, it should be encompassed by an error estimation. The article presents and verifies uncertainties along with imperfections connected with image analysis and expands on the possible ways of their correction. One of key aspects of such research is finding both appropriate place and the number of photos to take. A coarse- grained sandstone thin section was photographed and then pictures were combined into one, bigger image. Fractal parameters distributions show their change and suggest that the accurately gathered group of photos include both highly and less porous regions. Their amount should be representative and adequate to the sample. The resolution influence on the fractal dimension and lacunarity values was examined. For SEM limestone images obtained using backscattered electrons, magnification in the range of 120x to 2000x was used. Additionally, a single pore was examined. The acquired results point to the fact that the values of fractal dimension are similar to a wide range of magnifications, while lacunarity changes each time. This is connected with changing homogeneity of the image. The article also undertakes a problem of determining fractal parameters spatial distribution based on binarization. The available methods assume that it is carried out after or before the image division into rectangles to create fractal dimension and lacunarity values for interpolation. An individual binarization, although time consuming, provides better results that resemble reality to a closer degree. It is not possible to define a single, correct methodology of error elimination. A set of hints has been presented that can improve results of further image analysis of pore space.
Go to article

Abstract

The research of development capabilities is a fundamental of strategic issues, which has to be taken into consideration by coal mines. This is particularly difficult in the current environment, which is determined by its crisis situation. In such conditions, it is necessary to take difficult decisions, and serious, strategic challenges into account, which allow for the crisis to be overcome, for the renewal and economic effectiveness of the operation of these coal mines, which have potential to grow, and closing the coal mines, which have not potential to grow. Due to the effects of such decisions, which concern not only coal mines but also the Silesian region, it is essential to prepare information to support them and promote rational choices. This is related to the issue of research for development possibilities. The article presents considerations related to the subject of research for development possibilities of coal mines in a crisis situation. Taking the results of literature study into account, the model of research process was developed, and identified the research issues concerning the following: - the identification of external factors which determine the possibility of development of the Polish mines and drawing a schedule of their changes in the future, - the identification of internal factors which determine the possibility of development of the Polish mines, - developing a way for the assessment of the development potential of the coal mines, to show appropriate strategic options and action programmes for these options, - determining possible strategic options and corresponding schedules, appropriate for the specific nature of the mines. The proposition of their solutions, which were obtained in the process of using the specific methods and research tools, allowed the guidelines in terms of research of development capabilities of coal mines to be presented.
Go to article

Abstract

Bacteria from the Simkaniaceae family are intracellular parasites belonging to the Chlamydiales order, detected in surface waters, drinking water, chlorine water, and in wastewater. Its main representative, Simkania negevensis, is pathogenic to humans and animals, especially fishes, as it principally causes respiratory tract diseases. Bacteria from this family are also capable of surviving and existing in free-living amoebas, omnipresent in the natural environment, which makes them an additional risk for human and animal health. The aim of the present study was to search for representatives of this family in freshwaters from the Odra River and two municipal lakes (Rusałka and Goplana). Out of 100 water samples analysed, the sequence of bacteria of Simkaniaceae family was found just in 1 percent, because phylogenetic analysis revealed that the obtained OdraWCh30 sequence shows 93% similarity to Simkania negevensis strain Z as well as 87% similarity to Candidatus Syngnamydia salmonis isolate Ho-2008 and Candidatus Syngnamydia salmonis isolate VS10102006 and 84-85% similarity to endosymbiont of Xenoturbella westbladi, Simkaniaceae bacterium clone SM081012-5s and Candidatus Syngnamydia venezia strain Pi3-2. This is the first case of detecting sequence of bacteria of Simkaniaceae family in the aquatic environment in Poland.
Go to article

Abstract

This article presents a case study of a large wedge failure. It took place during excavation of the last bench of storage cavern with an approximate dimension of 80 m long having a depth of 8 m. The adopted intervention followed a structured approach, which included immediate rock support, geotechnical and geological investigations in the failure zone and design modifications. Back analyses of the failure zone were also carried out to assess design parameters with observed geological conditions. Re assessment in the failure zone was carried out using modified design parameters, which included shorter benches, rock support installation schemes such as longer rock bolts, reinforced ribs of shotcrete and reduced construction advances. Geotechnical monitoring in and around failure zone were carried out for recording any alarming movements in the rock mass. Initially, geotechnical monitoring was carried out in the recently excavated zone of the cavern on a daily basis. Based on continuous monitoring data for at least one week, the frequency of subsequent monitoring can be decided. In most cases the deformation of rock mass was considerably less than the alarming values which were calculated based on detailed design for different rock classes. The paper discusses the failure, investigation, cause, assessment and remedial measures to complete the construction of cavern.
Go to article

Abstract

This paper presents a complex study of anhydrite interbeds influence on the cavern stability in the Mechelinki salt deposit. The impact of interbeds on the cavern shape and the stress concentrations were also considered. The stability analysis was based on the 3D numerical modelling. Numerical simulations were performed with use of the Finite Difference Method (FDM) and the FLAC3D v. 6.00 software. The numerical model in a cuboidal shape and the following dimensions: length 1400, width 1400, height 1400 m, comprised the part of the Mechelinki salt deposit. Three (K-6, K-8, K-9) caverns were projected inside this model. The mesh of the numerical model contained about 15 million tetrahedral elements. The occurrence of anhydrite interbeds within the rock salt beds had contributed to the reduction in a diameter and irregular shape of the analysed caverns. The results of the 3D numerical modelling had indicated that the contact area between the rock salt beds and the anhydrite interbeds is likely to the occurrence of displacements. Irregularities in a shape of the analysed caverns are prone to the stress concentration. However, the stability of the analysed caverns are not expected to be affected in the assumed operation conditions and time period (9.5 years).
Go to article

Abstract

The main aim of the research has been to characterise changes the urban functional areas in Poland over 2002–2017 period. The research was based on J.W. Webb’s population development types method enabling to identify links between natural growth and the migration net. A wider analysis concerned components of real increase which, through feedback, influenced level and population dynamics in these areas. Results of the study showed the diversity of demographic processes within Polish urban functional areas as well as in their cores, which will shape different processes in those areas in the future.
Go to article

Abstract

Transport is one of the factors influencing the development of metropolitan areas. However, for its efficient work, numerous optimizations are required. Main tasks are shortening travel time, improving service quality and increasing the number of passengers served. The author has presented current studies on the field in optimization of public transport, mainly ways to optimize the transport network construction, based on large data sets about the population and their communication behaviour. Methods of combining various types of public transport with each other are presented. In the paper also are presents authors studies on the communication accessibility within the city of Cracow. Estimated distances from buildings to various types of public transport stops. The results were presented in aggregated form. Calculated communication speed of three types of public transport functioning in Cracow has also been discussed.
Go to article

Abstract

In this article, a comparison of economic effectiveness of various heating systems dedicated to residential applications is presented: a natural gas-fueled micro-cogeneration (micro-combined heat and power – μCHP) unit based on a free-piston Stirling engine that generates additional electric energy; and three so-called classical heating systems based on: gas boiler, coal boiler, and a heat pump. Calculation includes covering the demand for electricity, which is purchased from the grid or produced in residential system. The presented analyses are partially based on an experimental investigation. The measurements of the heat pump system as well as those of the energy (electricity and heat) demand profiles in the analyzed building were conducted for a single-family house. The measurements of the μCHP unit were made using a laboratory stand prepared for simulating a variable heat demand. The overall efficiency of the μCHP was in the range of 88.6– 92.4%. The amounts of the produced/consumed energy (electricity, heat, and chemical energy of fuel) were determined. The consumption and the generation of electricity were settled on a daily basis. Operational costs of the heat pump system or coal boiler based heating system are lower comparing to the micro-cogeneration, however no support system for natural gas-based μCHP system is included.
Go to article

Abstract

The purpose of this paper is to go beyond the usual scheme associated with Clausewitz, which narrows his life down to being a soldier and concentrates solely on his theory of war. By presenting his main methodological approach, the study examines the role of history in Clausewitz’s thinking and analyses how his historical studies tested and validated his evolving theoretical structure and how they could enable soldiers who had never fought or served as commanders to develop their battle intuition and enhance decision making process by learning from real world examples in times of peace.
Go to article

Abstract

The pump performance and occurrence of cavitation directly depends on different operating conditions. To cover a wide range of operation conditions for detecting cavitation in this work, investigations on the effect of various suction valve openings on cavitation in the pump were carried out. In order to analyse various levels of cavitation in different operation conditions, the effect of the decrease in the inlet suction pressure of the centrifugal pump by controlling the inlet suction valve opening was investigated using this experimental setup. Hence, the acoustic and pressure signals under different inlet valve openings and different flow rates, namely, 103, 200, 302 l/min were collected for this purpose. A detailed analysis of the results obtained from the acoustic signal was carried out to predict cavitation in the pump under different operating conditions. Also, the acoustic signal was investigated in time domain through the use of the same statistical features. The FFT technique was used to analyse the acoustic signal in the frequency domain. In addition, in this work an attempt was made to find a relationship between the cavitation and noise characteristics using the acoustic technique for identifying cavitation within a pump.
Go to article

Abstract

This article focuses on the question of the relation between the subject of The Modern World-System by Immanuel Wallerstein and the theoretical object of worldsystem analysis as a multidisciplinary approach that he proposed for history and the social sciences. The importance of this approach as well as its theoretical deficiencies are shown by examining two unanswered critiques of the first volume of The Modern World-System — one coming from Robert Brenner and the second from Fernand Braudel.
Go to article

Abstract

The iron ore mine owned by the state concern of Luossavaara – Kiirunavaara AB-LKAB state concern has several mining skip shaft hoists for drawing iron ore. Despite using modern systems to secure the travel of these hoists in line with the Swedish regulations, units intended for the emergency breaking of vessels must be used in the so-called free travel paths in the tower and in the shaft sump. The paper discusses the main requirements that, in accordance with the Swedish regulations as regards the operational use of mining shaft hoists, must be met by devices of this type and a solution was proposed for a structure design of the braking unit for the mining shaft hoist installed in the B-1 shaft in the Kiruna mine. The frictional braking system in the form of moving bumping beams was decided to be used in the said hoist, developed in the Cable Transport Department in the University of Science and Technology in Krakow. The action of moving bumping beams consists in these beams, placed at the beginning of free travel paths, not only braking the rushing hoist vessels but also (with the integrated units for vessel capture) performing the function of grips. They secure the vessels against falling down into the shaft after the finished braking process. The advantage of such a solution is that the structural elements: the guiding shank of the tower, the head of the vessel and the bumping beams, transfer many times lower values of dynamic forces at the time of the strike of the vessel against the moving bumping beams when compared with dynamic forces arising at the time of the hit of the vessel against the fixed bumping beams. In the process of designing moving bumping beams, braking simulation is an important stage conducted with a computer program developed in KTL AGH. This program enables the modelling of load-bearing and balance ropes as flexible elements with elastic and suppressing properties. The results of these simulations, especially in the scope of the achieved braking deceleration of the vessels, the values of braking distances and forces in the load-bearing ropes are crucial in confirming the correctness of the assumed concept of the emergency braking system. The braking units in the form of moving bumping beams have been executed by the Polish company Coal-Bud Sp. z o.o. and are now being integrated in the tower and in the shaft sump of the B-1 shaft of the Kiruna mine in Sweden.
Go to article

Abstract

The paper presents validation tests for method which is used for the evaluation of the statistical distribution parameters for 3D particles’ diameters. The tested method, as source data, uses chord sets which are registered from a random cutting plane placed inside a sample space. In the sample space, there were individually generated three sets containing 3D virtual spheres. Each set had different Cumulative Distribution Function (CDF3) of the sphere diameters, namely: constant radius, normal distribution and bimodal distribution as a superposition of two normal distributions. It has been shown that having only a chord set it is possible, by using the tested method, to calculate the mean value of the outer sphere areas. For the sets of data, a chord method generates quite large errors for around 10% of the smallest nodules in the analysed population. With the increase of the nodule radii, the estimation errors decrease. The tested method may be applied to foundry issues e.g. for the estimation of gas pore sizes in castings or for the estimation of nodule graphite sizes in ductile cast iron.
Go to article

Abstract

The paper presents the results of the noise propagation analysis in ship structures tested in a number of AHTS (Anchor Handling Tug Supply) vessels. Statistical Energy Analysis (SEA) based on numerical model developed specially for the purpose of this numerical investigation were conducted. This numerical model enabled the analysis of both the structural elements and the acoustic spaces. For the detailed studies 47 points fixed at various ship locations were selected. Prediction results with use of the numerical model were compared with the experimental results carried out in six identical AHTS vessels. Experimental studies were performed in accordance with the requirements of the International Maritime Organization (IMO) Resolution A.468 (XII). As a result one presented a comparison of the model analysis and experimental tests results.
Go to article

This page uses 'cookies'. Learn more