The paper presents an analysis of the influence of elevated temperature on thin-walled purlins restrained by sheeting. In the first part of the study the bearing capacity of purlins cooperating with sheeting is examined in normal and elevated temperature based on European Standards. Next, special attention is paid to creating a numerical FEM model of the restrained purlins in Abaqus program taking into account different materials properties with respect to temperature increase.
The paper presents a proposal for the assessment of the reliability of steel truss (both statically determinate and indeterminate) in the persistent and accidental design situation. In the analysis, a probabilistic approach was used. The global Hasofer-Lind reliability index was employed, computed in successive time steps for the whole structure, not for individual elements. The statically determinate truss was modelled as a serial system from the reliability standpoint. For the statically indeterminate truss, kinematically admissible failure mechanisms were determined by means of the examination of the singularity of the stiffness matrix of the structure, converting the truss into a geometrically variable system. For the problem thus formulated, a serial-parallel reliability model was constructed. Monitoring the reliability index in the successive minutes of the fire makes it possible to estimate the probability of the structure failure, and to decide whether the required safety level is maintained.
Choral singers are among intensive voice users whose excessive vocal effort puts them at risk of developing voice disorders. The aim of the work was to assess voice quality for choral singers in the choir at the Polish-Japanese Academy of Information Technology. This evaluation was carried out using the acoustic parameters from the COVAREP (A Collaborative Voice Analysis Repository For Speech Technologies) repository. A prototype of a mobile application was also prepared to allow the calculation of these parameters. The study group comprised 6 male and 19 female choir singers. The control group consisted of healthy non-singing individuals, 50 men and 39 women. Auditory perceptual assessment (using the RBH scale) as well as acoustic analysis were used to test the voice quality of all the participants. The voice quality of the female choir singers proved to be normal in comparison with the control group. The male choir singers were found to have tense voice in comparison with the controls. The parameters which proved most effective for voice evaluation were Peak Slope and Normalized Amplitude Quotient.
Senecavirus A (SVA) the only member of the Senecavirus genus within the Picornaviridae family, is an emerging pathogen causing swine idiopathic vesicular disease and epidemic transient neonatal losses. Here, SVA strain (CH-HNKZ-2017) was isolated from a swine farm exhibiting vesicular disease in Henan Province of Central China. A phylogenetic analysis based on complete genome sequence indicated that CH-HNKZ-2017 was closely related to US-15-40381IA, indica- ting that a new SVA isolate had emerged in China.
Exploitation of hard coal seams by roadway system is applied by two coal mines in southern Poland in Upper Silesian Basin. It is a secondary mining exploitation carries out in safety pillars of urban areas and shafts within mining areas of closed coal mines. Roadway system is the excavation process of gateways which are made in parallel order leaving coal pillars between them. An optimal width of coal pillar makes roadway stable and reduces subsidence of terrain surface. The article presents results of subsidence simulation caused by partial extraction using empirical and numerical methods on the example of one exploitation field of “Siltech” coal mine. The asymptotic state of subsidence was considered after mining ceased in the study area. In order to simulate of subsidence, numerical model of rock mass and model of Knothe-Budryk theory were calibrated. Simulation of vertical displacements in numerical method was carried out using RS3 program by Rocscience based on finite element method. The assumption was made that model of rock mass is transversely isotropic medium, in which panels were designed according to order of extraction of coal seams. The results of empirical and numerical methods were compared with measured values of subsidence at benchmarks along drawn lines (subsidence profiles).
The term Pakoszówka-Bessów type pottery is used to describe a specific kind of wheelmade pottery with easily abradable surfaces mostly dated to the 3rd century AD. Site 3 in Bessów, Bochnia Commune, Lesser Poland, is located in the dense Przeworsk culture settlement micro-region occupying the right bank of the lower reaches of the Raba River. The most characteristic feature of locally produced artefacts from Bessów, and to a lesser extent from other sites in the region, is the presence of enormous amounts of this pottery. The aim of laboratory analyses carried out on Pakoszówka-Bessów type pottery from Bessów was to verify the hypothesis that abradability of sherd surfaces is attributable to the alteration effect.
In individual dogs, despite good quality of raw sperm, some parameters are significantly changed after thawing, which cannot be predicted. We therefore investigated whether motility parameters objectively obtained by CASA, membrane integrity (MI), cell morphology or a combination are suitable to improve the prediction of bad post-thaw quality. For this purpose 250 sperm analysis protocols from 141 healthy stud dogs, all patients introduced for sperm cryopreservation, were evaluated and a Classification and Regression Tree (CART) -analysis performed. The sperm was routinely collected, analysed, and frozen by using a modified Uppsala system. After thawing, data were routinely examined by using CASA, fluorescent microscopy for membrane integrity (MI) and Hancock’s fixation for evaluation of cell morphology. Samples were sorted by post-thaw progressive motility (P) in good (P > / = 50%, n=135) and bad freezers (P<50%, n=115). Among bad freezers, 73.9% showed in addition post-thaw total morphological abberations of >40% and/or MI <50%. Bad freezers were significantly older than good freezers (p<0.05). Progressive motility (P), velocity curvilinear (VCL), mean coefficient (STR), and linear coefficient (LIN) were potential predictors for post-thaw sperm quality since specifity was best (85.8%) and sensitivity (75.4 %) and accuracy (80.4 %) good. For these objectively measured raw sperm parameters, cut-off values were calculated allowing prediction of bad post-thaw results with high accuracy: P = 83.1 % VCL = 161.3 µm/sec, STR = 0.83 %, and LIN = 0.48 %. Raw sperm samples with values below these cut off values will have below average post-thaw quality with a probability of 85.8%. We conclude that VCL, P, STR and LIN are potential predictors of the outcome of sperm cryopreservation, when combined.
In this paper, the applications of the multivariate data analysis and optimization on vibration signals from compressors have been tested on the assembly line to identify nonconforming products. The multivariate analysis has wide applicability in the optimization of weather forecasting, agricultural experiments, or, as in this case study, in quality control. The techniques of discriminant analysis and linear program were used to solve the problem. The acceleration and velocity signals used in this work were measured in twenty-five rotating compressors, of which eleven were classified as good baseline compressors and fourteen with manufacturing defects by the specialists in the final acoustic test of the production line. The results obtained with the discriminant analysis separated the conforming and nonconforming groups with a significance level of 0.01, which validated the proposed methodology.
Canine parvovirus (CPV) causes acute gastroenteritis in domestic dogs, cats, and several wild carnivore species. In this study, the full-length VP2 gene of 36 CPV isolates from dogs and cats infected between 2016 and 2017 in Beijing was sequenced and analyzed. The results showed that, in dogs, the new CPV-2a strain was the predominant variant (n = 18; 50%), followed by the new CPV-2b (n = 6; 16.7%) and CPV-2c (n = 3; 8.3%) strains, whereas, among cats, the predominant strain was still CPV-2 (n = 9; 25%). One new CPV-2a strain, 20170320-BJ-11, and two CPV-2c strains, 20160810-BJ-81 and 20170322-BJ-26, were isolated and used to perform experimental infections. Multiple organs of beagles that died tested PCR positive for CPV, and characteristic histopathological lesions were observed in organs, including the liver, spleen, lungs, kidneys, small intestines, and lymph nodes. Experimental infections showed that the isolates from the epidemic caused high morbidity in beagles, indicating their virulence in animals and suggesting the need to further monitor evolution of CPV in China.
Successful slogans in Italian political discourse – This paper aims to describe the notion of ‘sloganisation’, with special regard to the fortune and circulation of certain slogans in Italian public discourse. An analysis of their forms, contexts of occurrence (political propaganda, advertising, football supporters) and means of diffusion (street talk, electoral manifestos, traditional and new media) shows an increasing desemantisation of this kind of message. Slogans are routinely used by political parties and are widely quoted, regardless of their ideological content, merely in order to create identification or to increase the polemical attitude of their leader.
This article shows acoustic measurements from Svalbard archipelago in the Arctic, located in the Arctic Ocean. The aim of the research was to show the Svalbard soundscape as well as to record and analyse the spatial-temporal dynamics of the acoustic environment, the human impact on the soundscape and to collect baseline data for future comparative research. Svalbard is interesting for many science disciplines because it has an arctic climate and, at the same time, it is relatively easily accessible. Climatologists, geologists, glaciologists, biologists and even anthropologists could find interesting themes to investigate here. Additionally, the soundscape of Spitsbergen is worthy of detailed examination. This paper presents comparative analysis of the soundscape of various spots near Longyearbyen in Management Area 10. The soundscape analysis of selected valleys shows the strong influence of human activity on the soundscape as well as the variability and characteristic features of the natural Arctic soundscape.
Eighty five faecal samples of the Svalbard reindeer inhabiting the coastal terrace of the northern side of Hornsund were collected in July 2005 and analyzed coprologically. The standard flotation method revealed a 97.6% prevalence of infection at an average intensity of 20 eggs in a single subsample. The quantitative, modified McMaster method helped to estimate the mean number of eggs in a gram of faeces (EPG) at 134.7. In the studied samples eggs of nematodes representing two species, i.e. Ostertagia gruehneri (97.6%, on average 20 eggs in a sample) and Marshallagia marshalli (2.3%, single eggs), were identified.
We describe the spatial variability of snow accumulation on three selected glaciers in Spitsbergen (Hansbreen, Werenskioldbreen and Aavatsmarkbreen) in the winter seasons of 1988/89, 1998/99 and 2001/2002 respectively. The distribution of snow cover is determined by the interrelationships between the direction of the glacier axes and the dominant easterly winds. The snow distribution is regular on the glaciers located E-W, but is more complicated on the glaciers located meridionally. The western part of glaciers is more predisposed to the snow accumulation than the eastern. This is due to snowdrift intensity. Statistical relationships between snow accumulation, deviation of accumulation from the mean values and accumulation variability related to topographic parameters such as: altitude, slope inclination, aspect, slope curvature and distance from the edge of the glacier have been determined. The only significant relations occured between snow accumulation and altitude (r = 0.64-0.91).
BIM (Building Information Modelling) is a tool and technology closely related to the planning, design, implementation and management of construction investments – both at the level of a building, as well as infrastructure or civil engineering. It combines advanced spatial modeling (using virtual representations of building elements) with management of information at every level, from the modelling of building’s components, through complex interactions between these elements, to the description of building processes and the behavior of users of the building. This is just a part of many possibilities, the full application depends only on the needs and skills of the system user. Construction dependencies are set at the level of the IFC (Industry Foundation Class) universal standard IFC, its syntax allows to describe not only the physical structure of the object, but also their mutual interactions. This is done in a hierarchical way, i.e. from the superior element there are subsequent, lower-level elements and interactions. So how can this tool be used in urban revitalization? The basic problem here is the excess of information related to and contained in the virtual model. In urban planning and design, most of this data is unnecessary. On the other hand, the data contained in the GIS (Geographic Information System) models, despite correlation with external databases, are insufficient. Basic location data, technical conditions of facilities and infrastructure, property dependencies are not enough to obtain a full picture of the urban space. The solution to the problem of linking these systems is CIM (City Information Modeling). It combines the description of an object derived from IFC with database support at the level of GIS systems. Such a broad approach allows for placing enough information in one virtual space for designing, modeling and analyzing urban space. The article is an attempt to demonstrate what conditions must be met by the CIM system, to extend its functionality to issues related to the revitalization of urban areas: whether and how the information contained in the spatial model can be used to determine the rules for the revitalization of space at the urban level?
Maternal mortality has posed a great problem in the health sector of most African countries. Nigeria’s maternal mortality ratio remains high despite efforts made to meet millennium development goal 5 (MDG5). This study used the Lagos state community health survey 2011 and the Lagos state health budget allocations 2011 to examine the effect of government expenditure on maternal mortality ratio. Factors like inadequate transportation facilities, lack of awareness, inadequate infrastructures, which contribute to high maternal mortality rate, can be traced back to revenue though under different ministries. The other ministries need to work and support the ministry of health in the fight against maternal, especially in Lagos state. Secondary data was compiled from the state budget, records of death in different local governments in the state and relevant reviewed literature. Regression analysis was used to analyze the hypothesis and it was discovered that government expenditure does not have a significant effect on maternal mortality based on the R-square coefficient. However, correlation coefficient gives a contrasting result. Hence, further research work, government expenditure from other local government areas need to be taken into consideration to arrive at a valid conclusion. It is difficult to ascertain how much of the revenue allocated was put to appropriate use, due to a high level of corruption.
The human voice is one of the basic means of communication, thanks to which one also can easily convey the emotional state. This paper presents experiments on emotion recognition in human speech based on the fundamental frequency. AGH Emotional Speech Corpus was used. This database consists of audio samples of seven emotions acted by 12 different speakers (6 female and 6 male). We explored phrases of all the emotions – all together and in various combinations. Fast Fourier Transformation and magnitude spectrum analysis were applied to extract the fundamental tone out of the speech audio samples. After extraction of several statistical features of the fundamental frequency, we studied if they carry information on the emotional state of the speaker applying different AI methods. Analysis of the outcome data was conducted with classifiers: K-Nearest Neighbours with local induction, Random Forest, Bagging, JRip, and Random Subspace Method from algorithms collection for data mining WEKA. The results prove that the fundamental frequency is a prospective choice for further experiments.
The article is devoted to personal nouns with suffi x -ant in Polish and Belarusian. The lexical and semantic analysis of the studied group of words showed that in both languages they belong to the literary variety of language, however, numerous nouns represent rare vocabulary, sometimes characterized stylistically. The overwhelming majority of names defi nes the names of active contractors of activities, less often – passive contractors, and least frequently – names of owners. In addition, the nomina masculina with suffi x -ant belong to the attributive names, defi ning people on the basis of their character traits, tendencies, and often vices. The s tudied lexis include archaic or colloquial derivatives. Among the specialist words, there were examples representing such fi elds as law and judiciary, economics and trade, religion and art, education and science.
The article presents the results of research concerning to AlCu4MgSi alloy ingots produced using horizontal continuous casting process. The presented research was focused on the precise determination of phase composition of the precipitates formed during the solidification of ingots and the analysis of their thermal stability. In order to assess the morphology of precipitates in the AlCu4MgSi alloy, data obtained by using a computer simulation of thermodynamic phenomena were compiled with results obtained using advanced research techniques, i.e. High-temperature X-ray diffraction (HT-XRD), SEM-EDS, Thermal and derivative analysis (TDA) and Glow discharge optical emission spectroscopy (GD OES). SEM observations and analysis of chemical composition in micro-areas showed that the precipitates are mainly intermetallic θ-Al2Cu and β-Mg2Si phases, and also presence of Al19Fe4MnSi2 intermetallic phase was confirmed by X-ray diffraction studies. Based on the prepared Thermo-Calc simulation data, high-temperature X-ray diffraction measurements were conducted.
Spitsbergen glaciers react rapidly to changes in the polar environment, which is expressed in differences in extent of their fronts and surface geometry. The Scott Glacier, which is situated in the NW part of Wedel Jarlsberg Land, is an example of the glacier that has undergone almost continuous recession since the Little Ice Age, interrupted by surges. The variations in recession are characterised based on multiannual data with particularly consideration of the period 1990–2005 and the season 2005/2006. Acceleration of front recession and lowering the surface was found only within the tongue up to a height of about 220 m a.s.l. Whereas, in the area situated in the zone of rock steps and above in the ablation zone, the change of glacier surface ablation (Dh) has been recorded compared to the mean annual recession for the period 1990–2005. Moreover, for the upper firn field, the positive surface ablation (DhS7 = +0.19 m) was observed. As the result of progressive reduction of the Scott Glacier mass, with the participation of other factors (bedrock relief among others), new surfaces of roche moutonnée are uncovering particularly in the tongue zone.
The paper presents a spatial distribution of changes of air temperature (T) in the Arctic. Estimates of their spatial relations in the study region were based on a correlation analysis. T in the Arctic is most strongly correlated spatially in winter and spring, and least in summer. The radius of extent of statistically significant correlation coefficients of changes of T at the stations Svalbard Lufthavn, Ostrov Kotelny and Resolute A is equal to 2000-2500 km in winter and 1500-2000 km in summer. An attempt was done to delimit the regions of consistent occurrence of the anomalies T with respect to the signs and magnitudes, as well as of the regions with the most coherent T. The Wroclaw dendrite method was used to solve this problem. Relations of the mean areał T of the climatic regions and of the Arctic as a whole, with the northern hemisphere of temperature and selected climatic factors are presented.
Fractal analysis is one of the rapidly evolving branches of mathematics and finds its application in different analyses such as pore space description. It constitutes a new approach to the issue of their natural irregularity and roughness. To be properly applied, it should be encompassed by an error estimation. The article presents and verifies uncertainties along with imperfections connected with image analysis and expands on the possible ways of their correction. One of key aspects of such research is finding both appropriate place and the number of photos to take. A coarse- grained sandstone thin section was photographed and then pictures were combined into one, bigger image. Fractal parameters distributions show their change and suggest that the accurately gathered group of photos include both highly and less porous regions. Their amount should be representative and adequate to the sample. The resolution influence on the fractal dimension and lacunarity values was examined. For SEM limestone images obtained using backscattered electrons, magnification in the range of 120x to 2000x was used. Additionally, a single pore was examined. The acquired results point to the fact that the values of fractal dimension are similar to a wide range of magnifications, while lacunarity changes each time. This is connected with changing homogeneity of the image. The article also undertakes a problem of determining fractal parameters spatial distribution based on binarization. The available methods assume that it is carried out after or before the image division into rectangles to create fractal dimension and lacunarity values for interpolation. An individual binarization, although time consuming, provides better results that resemble reality to a closer degree. It is not possible to define a single, correct methodology of error elimination. A set of hints has been presented that can improve results of further image analysis of pore space.
The research of development capabilities is a fundamental of strategic issues, which has to be taken into consideration by coal mines. This is particularly difficult in the current environment, which is determined by its crisis situation. In such conditions, it is necessary to take difficult decisions, and serious, strategic challenges into account, which allow for the crisis to be overcome, for the renewal and economic effectiveness of the operation of these coal mines, which have potential to grow, and closing the coal mines, which have not potential to grow. Due to the effects of such decisions, which concern not only coal mines but also the Silesian region, it is essential to prepare information to support them and promote rational choices. This is related to the issue of research for development possibilities. The article presents considerations related to the subject of research for development possibilities of coal mines in a crisis situation. Taking the results of literature study into account, the model of research process was developed, and identified the research issues concerning the following: - the identification of external factors which determine the possibility of development of the Polish mines and drawing a schedule of their changes in the future, - the identification of internal factors which determine the possibility of development of the Polish mines, - developing a way for the assessment of the development potential of the coal mines, to show appropriate strategic options and action programmes for these options, - determining possible strategic options and corresponding schedules, appropriate for the specific nature of the mines. The proposition of their solutions, which were obtained in the process of using the specific methods and research tools, allowed the guidelines in terms of research of development capabilities of coal mines to be presented.
Bacteria from the Simkaniaceae family are intracellular parasites belonging to the Chlamydiales order, detected in surface waters, drinking water, chlorine water, and in wastewater. Its main representative, Simkania negevensis, is pathogenic to humans and animals, especially fishes, as it principally causes respiratory tract diseases. Bacteria from this family are also capable of surviving and existing in free-living amoebas, omnipresent in the natural environment, which makes them an additional risk for human and animal health. The aim of the present study was to search for representatives of this family in freshwaters from the Odra River and two municipal lakes (Rusałka and Goplana). Out of 100 water samples analysed, the sequence of bacteria of Simkaniaceae family was found just in 1 percent, because phylogenetic analysis revealed that the obtained OdraWCh30 sequence shows 93% similarity to Simkania negevensis strain Z as well as 87% similarity to Candidatus Syngnamydia salmonis isolate Ho-2008 and Candidatus Syngnamydia salmonis isolate VS10102006 and 84-85% similarity to endosymbiont of Xenoturbella westbladi, Simkaniaceae bacterium clone SM081012-5s and Candidatus Syngnamydia venezia strain Pi3-2. This is the first case of detecting sequence of bacteria of Simkaniaceae family in the aquatic environment in Poland.
This article presents a case study of a large wedge failure. It took place during excavation of the last bench of storage cavern with an approximate dimension of 80 m long having a depth of 8 m. The adopted intervention followed a structured approach, which included immediate rock support, geotechnical and geological investigations in the failure zone and design modifications. Back analyses of the failure zone were also carried out to assess design parameters with observed geological conditions. Re assessment in the failure zone was carried out using modified design parameters, which included shorter benches, rock support installation schemes such as longer rock bolts, reinforced ribs of shotcrete and reduced construction advances. Geotechnical monitoring in and around failure zone were carried out for recording any alarming movements in the rock mass. Initially, geotechnical monitoring was carried out in the recently excavated zone of the cavern on a daily basis. Based on continuous monitoring data for at least one week, the frequency of subsequent monitoring can be decided. In most cases the deformation of rock mass was considerably less than the alarming values which were calculated based on detailed design for different rock classes. The paper discusses the failure, investigation, cause, assessment and remedial measures to complete the construction of cavern.
This paper presents a complex study of anhydrite interbeds influence on the cavern stability in the Mechelinki salt deposit. The impact of interbeds on the cavern shape and the stress concentrations were also considered. The stability analysis was based on the 3D numerical modelling. Numerical simulations were performed with use of the Finite Difference Method (FDM) and the FLAC3D v. 6.00 software. The numerical model in a cuboidal shape and the following dimensions: length 1400, width 1400, height 1400 m, comprised the part of the Mechelinki salt deposit. Three (K-6, K-8, K-9) caverns were projected inside this model. The mesh of the numerical model contained about 15 million tetrahedral elements. The occurrence of anhydrite interbeds within the rock salt beds had contributed to the reduction in a diameter and irregular shape of the analysed caverns. The results of the 3D numerical modelling had indicated that the contact area between the rock salt beds and the anhydrite interbeds is likely to the occurrence of displacements. Irregularities in a shape of the analysed caverns are prone to the stress concentration. However, the stability of the analysed caverns are not expected to be affected in the assumed operation conditions and time period (9.5 years).