Overseas mining investment generally faces considerable risk due to a variety of complex risk factors. Therefore, indexes are often based on conditions of uncertainty and cannot be fully quantified. Guided by set pair analysis (SPA) theory, this study constructs a risk evaluation index system based on an analysis of the risk factors of overseas mining investment and determines the weights of factors using entropy weighting methods. In addition, this study constructs an identity-discrepancycontrary risk assessment model based on the 5-element connection number. Both the certainty and uncertainty of the various risks are treated uniformly in this model and it is possible to mathematically describe and quantitatively express complex system decisions to evaluate projects. Overseas mining investment risk and its changing trends are synthetically evaluated by calculating the adjacent connection number and analyzing the set pair potential. Using an actual overseas mining investment project as an example, the risk of overseas mining investment can be separated into five categories according to the risk field, and then the evaluation model is quantified and specific risk assessment results are obtained. Compared to the field investigation, the practicability and effectiveness of the evaluation method are illustrated. This new model combines static and dynamic factors and qualitative and quantitative information, which improves the reliability and accuracy of risk evaluation. Furthermore, this evaluation method can also be applied to other similar evaluations and has a certain scalability.
Washing is very popular technological operation removing clay particles from aggregates. The amount of mineral washing sludges increases. Besides filling the excavations, there is no common method of their utilization. The usage of sludges from washing aggregates in building ceramics might be environmentally friendly way to utilize them. This paper presents laboratory research on two type of sludges: from dolomite and limestone aggregates washing. Selected properties of sludges such as water content, particle size distribution (sieve and areometric method), chemical composition (XRF), mineral composition (XRD), thermal properties (STA/EGA, dilatometry, heating microscopy) and stability of fired materials during steam exposure were determined. It was found that dolomite sludge contains more clay minerals and less carbonates, it is more finely grained than limestone sludge. Limestone sludge has large fluctuations in water content and has high content of potentially hazardous calcite grains. During heating up to 1300°C of both dried sludges decarbonation and sintering take place. Dolomite sludge softens, melts and flows below 1300°C. After firing sludges at 1000°C material made of limestone sludge is not resistant to steam. The obtained result suggests that dolomite sludge can be used in building ceramics technology without processing as main component of ceramic mass. Limestone sludge have to be ground before its application in building ceramic materials. Results suggest that it can not be used as the main raw material in ceramic masses, but only as an additive.
The aim of the article to assess the functioning of the NewConnect market over 10 years from the organizer’s and participants’ perspective. This helps to diagnose the most important organizational advantages and problems of the Polish MTF, determine further development prospects and propose potential changes to neutralize the negative factors. To illustrate the problem, a comprehensive analysis will be made of aggregated statistical data from 2007–2017, which show the changes and trends on this market, and additionally include the data comparing the current state of the NewConnect market with other alternative markets organized by European stock exchanges. The conducted research does not allow to view the NewConnect market as an organizational success. The analysis identified a number of problems in the functioning of the Polish MTF, ranging from the inappropriate organization of the primary market, resulting in the admittance of too high a number of issuers of dubious credibility, to the consequences appearing on the secondary shares market. It does not give unambiguous grounds to expect positive prospects for the market development in the future. In order to stop unfavorable trends and to improve the issuers’ quality, a discussion on the regulations regarding issuers’ admission, i.e. the size of the minimum equity, IPO, capitalization and the issue price of the debuting company, should be initiated.
The subject of the paper is the analysis of factors determining the value of multi-entity organizations in the energy sector and their ranking according to the degree of impact on this value. For this purpose, statistical methods were used, which are best suited to determine the order of diagnostic features according to a specific criterion. The survey covered companies from the Polish energy sector, while the process itself is based on aggregated data, which represents the financial data of capital groups currently operating in the Polish energy sector. The first part of the article presents a short description of the Polish energy sector, paying particular attention to the organizational structure of the sector, i.e. companies operating on the domestic energy market. The nature of a multi-entity enterprise as a typical economic unit in the sector is described. The second part of the article describes the assumptions of multidimensional comparative analysis (MCA) as a tool for comparing multifunctional units. The MCA makes it possible to find the most important parameters or indicators having the greatest impact on the value of a multi-entity organization, i.e. a capital group. The survey covered four companies from the Polish energy sector: TAURON Polska Energia SA, ENEA SA, ENERGA SA and PGE Polska Grupa Energetyczna SA. The study with the use of MCA was conducted in three stages: - in the first stage, on the basis of information contained in the financial statements, a matrix of diagnostic features was created, describing the financial condition of the examined entity, - in the second stage, the values of diagnostic variables were normalized/unified; two methods of normalization were applied: the method of standardization and zero unitization, - in the third stage, the diagnostic variables were grouped using two methods: the model measure of Hellwig’s development and the non-standard measure of development. The results of the analysis are illustrated by tables and figures.
The establishment of the Research Network Lukasiewicz (RNL) is aimed at strengthening the research potential and knowledge transfer from research institutes to enterprises. The article presents the results of the research potential analysis of 38 research institutes that are to form the RNL, based on data on scientific publications in 2013–2016. The number of publications of RNL institutes was similar to the number of publications of TNO and VTT institutes but smaller than that of Fraunhofer institutes. The publications of RNL institutes had lower values of indicators of international collaboration and collaboration with business as well as lower values of citation indices. Co-authors of RNL publications were mainly affiliated with national scientific units, whereas co-authorship with Fraunhofer, TNO and VTT institutes was marginal. The article also outlines the limitations and challenges of the adopted research method and future research orientations in this area.
The flow structure around rising single air bubbles in water and their characteristics, such as equivalent diameter, rising velocity and shape, was investigated using Particle Image Velocimetry (PIV) and Shadowgraphy in a transparent apparatus with a volume of 120 mL. The effect of different volumetric gas flow rates, ranging from 4 μL/min to 2 mL/min on the liquid velocity was studied. Ellipsoidal bubbleswere observedwith a rising velocity of 0.25–0.29m/s. It was found that a Kármán vortex street existed behind the rising bubbles. Furthermore, the wake region expanded with increasing volumetric gas flow rate as well as the number and size of the vortices.
In 1989–2017 women’s magazines were an important segment of Poland’s media market dominated by international publishing houses like Bauer Media, Edipresse Polska and Burda International. Each year they launched new leads (a total of about one hundred in that period). Most of them were successful in terms of sales and ad revenue. This article tries to chart the quantitative changes and major trends in the women’s magazines market as well as analyze the role of foreign capital in its development.
The petrographic composition of coal has a significant impact on its technological and sorption properties. That composition is most frequently determined by means of microscope quantitative analyses. Thus, aside from the purely scientific aspect, such measurements have an important practical application in the industrial usage of coal, as well as in issues related to the safety in underground mining facilities. The article discusses research aiming at analyzing the usefulness of selected parameters of a digital image description in the process of automatic identification of macerals of the inertinite group using neural networks. The description of the investigated images was based on statistical parameters determined on the basis of a histogram and co-occurrence matrix (Haralick parameters). Each of the studied macerals was described by means of a 20-element feature vector. An analysis of its principal components (PCA) was conducted, along with establishing the relationship between the number of the applied components and the effectiveness of the MLP network. Based on that, the optimum number of input variables for the investigated classification task was chosen, which resulted in reduction of the size of the network’s hidden layer. As part of the discussed research, the authors also analyzed the process of classification of macerals of the inertinite group using an algorithm based on a group of MLP networks, where each network possessed one output. As a result, average recognition effectiveness of 80.9% was obtained for a single MLP network, and of 93.6% for a group of neural networks. The obtained results indicate that it is possible to use the proposed methodology as a tool supporting microscopic analyses of coal.
In 2018, the 90th anniversary of Professor Vasiliy Danilovich Bondaletov`s birth will be celebrated. The aim of the article is to remind readers of the quantitative and qualitative method of statistical analysis in anthroponomastic research developed by Professor Bondaletov, as well as to show its advantages over simplified descriptions of the frequency of personal names. In this article, the detailed analysis of male Christian names found in customs books from Northern Russia (1633–1636 and 1678–1680) was conducted. The comparison of statistical data, according to the suggestion of Professor V. D. Bondaletov, enabled us to observe subtle differences between the abovementioned resources, namely to estimate the level of their (dis)similarity and describe the dynamics of the evolution of the resources of male Christian names throughout the 17th century, as well as changes in the popularity of various names.
To investigate the effect of different proximate index on minimum ignition temperature(MIT) of coal dust cloud, 30 types of coal specimens with different characteristics were chosen. A two-furnace automatic coal proximate analyzer was employed to determine the indexes for moisture content, ash content, volatile matter, fixed carbon and MIT of different types of coal specimens. As the calculated results showed that these indexes exhibited high correlation, a principal component analysis (PCA) was adopted to extract principal components for multiple factors affecting MIT of coal dust, and then, the effect of the indexes for each type of coal on MIT of coal dust was analyzed. Based on experimental data, support vector machine (SVM) regression model was constructed to predicate the MIT of coal dust, having a predicating error below 10%. This method can be applied in the predication of the MIT for coal dust, which is beneficial to the assessment of the risk induced by coal dust explosion (CDE).
An isogeometric boundary element method is applied to simulate wave scattering problems governed by the Helmholtz equation. The NURBS (non-uniform rational B-splines) widely used in the CAD (computer aided design) field is applied to represent the geometric model and approximate physical field variables. The Burton-Miller formulation is used to overcome the fictitious frequency problem when using a single Helmholtz boundary integral equation for exterior boundary-value problems. The singular integrals existing in Burton-Miller formulation are evaluated directly and accurately using Hadamard’s finite part integration. Fast multipole method is applied to accelerate the solution of the system of equations. It is demonstrated that the isogeometric boundary element method based on NURBS performs better than the conventional approach based on Lagrange basis functions in terms of accuracy, and the use of the fast multipole method both retains the accuracy for isogeometric boundary element method and reduces the computational cost.
In this paper, the recent ice regime variations in the Kara Sea have been described and quantified based on the high-resolution remote sensing database from 2003 to 2017. In general, the Kara Sea is fully covered with thicker sea ice in winter, but sea ice cover is continuously declining during the summer. The year 2003 was the year with the most severe ice conditions, while 2012 and 2016 were the least severe. The extensive sea ice begins to break up before May and becomes completely frozen at the end of December again. The duration of ice melting is approximately twice than that of the freezing. Since 2007, the minimum ice coverage has always been below 5%, resulting in wide open-waters in summer. Furthermore, the relevant local driving factors of external atmospheric forcing on ice conditions have been quantitatively calculated and analyzed. Winter accumulated surface air temperature has been playing a primary role on the ice concentration and thickness condition in winter and determining ice coverage index in the following melt-freeze stage. Correlation coefficients between winter accumulated temperature and ice thickness anomaly index, the ice coverage anomaly index, duration of melt-freeze stage can approach -0.72, -0.83 and 0.80, respectively. In summer, meridional winds contribute closely to summer ice coverage anomaly index, with correlation coefficient exceeding 0.80 since 2007 and 0.90 since 2010.
According to the Grant Map of the Ministry of Development (MoD) as of March-April 2017, there were 1716 urban regeneration (revitalization) projects implemented in Poland between 2007-2013. Data from 11 voivodeships (out of 16 regions NUTS 2 in Poland) and 977 projects was sufficient to provide a representative sample (56,9% of projects presented in the Grant Map). The main methods used in the article included observation and review of MoD statistical data and literature on the subject. As observed by the author, between 2007-2013 the definition of urban regeneration (revitalization) was only mentioned in one of the footnotes to the housing guidelines, which was a poor legal basis for the regional managing authorities. Similarly, there was no solid basis in the strategic documents (national) for that period: they did not provide any definition of revitalization. It was in the interest of the beneficiaries, as well as – partly – in the interest of those managing authorities to satisfy the local needs, especially those needs which were not considered the result of the shift to the post-industrial era, but rather as a result of numerous institutional and political events. Due to these features, the period 2007-2013 was dominated by infrastructure projects aimed at the quality of life but also efficient in terms of spending European money. It seems that there was an agreement between regional managing authorities and the benefi ciaries (potential voters) as to the way of spending the revitalization funding. This was understood differently at national level, but because institutions at this level were not involved directly in the urban regeneration (revitalization), their influence on regional units was minor. Even more so because the managing authorities were also interested in speeding up the process of spending European resources.
German academic language contains far more phrasemes than it used to be assumed. Apart from specialist expressions, there are many collocations, idioms and pragmatic phrasemes, which perform a number of textual functions. Scientific discourse has received an increased interest lately, however, no study of body-part phrasemes in academic language has been conducted. This paper presents an analysis of occurrence of phrasemes with the component “eye” in a specially created corpus of German academic texts in such branches as: linguistics, literary studies, foreign language teaching, and medicine. The paper approaches the following questions: Are such phrasemes used in scientifi c discourse and, if so, in which branches of science? What are the purposes of their use? Which phrasemes are favoured in all the analysed branches?
To overcome the detrimental influence of α impulse noise in power line communication and the trap of scarce prior information in traditional noise suppression schemes , a power iteration based fast independent component analysis (PowerICA) based noise suppression scheme is designed in this paper. Firstly, the pseudo-observation signal is constructed by weighted processing so that single-channel blind separation model is transformed into the multi-channel observed model. Then the proposed blind separation algorithm is used to separate noise and source signals. Finally, the effectiveness of the proposed algorithm is verified by experiment simulation. Experiment results show that the proposed algorithm has better separation effect, more stable separation and less implementation time than that of FastICA algorithm, which also improves the real-time performance of communication signal processing.
An application specific integrated design using Quadrature Linear Discriminant Analysis is proposed for automatic detection of normal and epilepsy seizure signals from EEG recordings in epilepsy patients. Five statistical parameters are extracted to form the feature vector for training of the classifier. The statistical parameters are Standardised Moment, Co-efficient of Variance, Range, Root Mean Square Value and Energy. The Intellectual Property Core performs the process of filtering, segmentation, extraction of statistical features and classification of epilepsy seizure and normal signals. The design is implemented in Zynq 7000 Zc706 SoC with average accuracy of 99%, Specificity of 100%, F1 score of 0.99, Sensitivity of 98% and Precision of 100 % with error rate of 0.0013/hr., which is approximately zero false detection.
The Serbian Language as Viewed by the East and the West: Synchrony, Diachrony, and Typology, edited by Ljudmila Popović and Motoki Nomachi is a collection of papers which were originally presented at the symposium on February 5th in 2014 at the Slavic-Euroasian Research Center of Hokkaido University. The authors analyze various examples of language contact and linguistic change in the history of the Serbian language with special attention to the cultural opposition of the East and West. In the last section, the results of contrastive analyses of Serbian and Japanese, Russian as well as other Slavic languages are presented. With regard to the topics discussed and high quality of all the studies (most authors are renowned linguists) the volume has a big value for contemporary Slavic linguistics.
The content of this paper is dedicated to the analysis of the flat planarity of forklift stacker’s track and cross sections of lanes between racks in a warehouse. These results will serve as a basis for a possible reconstruction of the track and racks and shall contribute to the overall reduction of costs related to an unexpected bad technical condition. The contribution aims to assess the geometric parameters of warehouse racks at the selected company operation in terms of their suitability for further use. The choice of the selected topic represents a relevant issue, which can be possibly encountered in daily practice related to the storage and transport processes of products. The measurements and processing of longitudinal profiles and cross-sections were made in the local coordinate and local vertical system. Points on the lower, middle and upper level of racks were measured for good and correct interpretation of results. Testing the measured positional change of poles is on the end of this paper. The immediate readiness of interest groups of subjects for adopting necessary actions to ensure the stability and safe operation of the whole network of lanes of the warehouse spaces is the expected contribution of the presented results.
An overview of the bibliography regarding the connection of knowledge about precious metal alloys and aspects of the use of computer aided technologies to the optimization of the jewelry casting processes is presented. An analysis of the usability of selected CAx systems was made: 1) for spatial design, called Rhinoceros 6 and 2) CAE system: NovaFlow & Solid (NF&S). The authors describe own research including data acquisition and evaluation of temperature variations during solidification of the selected Au-Ag-Cu alloy, with the identification of the phase transformations of this alloy. The intensity of heat exchange was changed (cooling of specimens under ambient temperature conditions – "normal" intensity and with the furnace – very slow cooling). The problem of completing the simulation database was pointed out and analyzed. Examples of simulations of casting selected jewelry (ring and signet) were given and compared with the result of the experiment realized in real conditions. It was confirmed that the optimization by combining experimental and simulation studies allows for the acquisition of new knowledge, and also facilitates the creation of new artistic designs of jewelry as well as performing the feasibility check, and then optimizing the chosen technology.
Martin Heidegger’s philosophy influenced both psychiatry and practical psychotherapy of mentally disturbed patients. The essay deals with Heidegger’s concepts of corporeality and disease, as they were expounded in the Zollikon seminars, and discusses the influence of Heidegger’s Dasein-analysis on Ludwig Binswanger and Medard Boss. The concepts of Dasein-analysis, proposed by the two psychiatrists, are also discussed. At the end of the paper the author shows the relevance of Heidegger’s thought for psychiatry and psychotherapy in general and for the so-called anthropological psychiatry in particular.
Root associated bacteria were isolated from Suaeda nudiflora and two isolates were selected for this study: rhizospheric Bacillus megaterium and endophytic Pseudomonas aeruginosa. These isolates were inoculated into maize variety Narmada Moti during its germination. TTC (2, 3, 5-triphenyl tetrazolium chloride) staining was used to confirm the association of the isolates with the maize root. The effects of these root associated bacteria were tested alone and in combinations for cell wall reinforcement and the induction of defense enzymes such as phenylalanine ammonia lyase (PAL) and β-1,3-glucanase in the presence of fungal pathogen Aspergillus niger in maize. The results indicated that the rhizospheric bacteria had a greater fight response to fungal infection than the endophhytic bacteria due to cell wall lignification as well as the rapid induction of higher concentrations of defense related enzymes.
In this paper a scaling approach for the solution of 2D FE models of electric machines is proposed. This allows a geometrical and stator and rotor resistance scaling as well as a rewinding of a squirrel cage induction machine enabling an efficient numerical optimization. The 2D FEM solutions of a reference machine are calculated by a model based hybrid numeric induction machine simulation approach. In contrast to already known scaling procedures for synchronous machines the FEM solutions of the induction machine are scaled in the stator-current-rotor-frequency-plane and then transformed to the torque- speed-map. This gives the possibility to use a new time scaling factor that is necessary to keep a constant field distribution. The scaling procedure is validated by the finite element method and used in a numerical optimization process for the sizing of an electric vehicle traction drive considering the gear ratio. The results show that the scaling procedure is very accurate, computational very efficient and suitable for the use in machine design optimization.
In this article Maurycy Mochnacki’s martyrological and messianic declarations in the Preface to the Uprising of the Polish Nation in 1830–1831 are examined in the context of the martyrological discourse in the literature of the Great Emigration. Such an affirmation may appear puzzling given Mochnacki’s rejection of martyrological interpretations of Poland’s history or messianic readings of his political philosophy, let alone his reputation of being radically opposed to Adam Mickiewicz’s idea of the sacrifi cial victimhood of the Polish nation. In this study the ideological and rhetorical aspects of their statements are compared and analysed. There can be little doubt that in the Preface Mochnacki’s phrasing is steeped in patriotic pathos which seems to be at odds with the tone of his other writings. This article claims that it was a tactical move on his part: he chose the familiar martyrological loci merely as a means to enlist the readers’ support for his own pragmatic programme of restoring Poland’s independence. A general conclusion to be drawn from this apparent inconsistency is that already at that stage (The Uprising was published in Paris in 1834) the logosphere of the Great Emigration had become so dominated by the martyrological discourse that Mochnacki could not afford to ignore it.