Wyniki wyszukiwania

Filtruj wyniki

  • Czasopisma
  • Autorzy
  • Słowa kluczowe
  • Data
  • Typ

Wyniki wyszukiwania

Wyników: 11
Wyników na stronie: 25 50 75
Sortuj wg:

Abstrakt

Jednym z parametrów oceny zagrożenia wynikającego ze składowania lub gospodarczego wykorzystania odpadów powęglowych jest badanie wymywalności szkodliwych substancji, takich jak arsen i jego związki. Wymywalność zależy zarówno od warunków środowiskowych terenu składowania, jak również od samych właściwości materiału odpadowego. Istnieje szereg metod badania wymywalności, które pozwalają modelować określone warunki lub mierzą swoiste właściwości procesu wymywania. Badania przeprowadzone w ramach opracowania miały na celu porównanie dwóch metod o odmiennych założeniach stosowania. Badanie wymywalności arsenu z odpadu pochodzącego z procesu wzbogacania węgla kamiennego przeprowadzono zgodnie z polską normą PN-EN 12457 oraz amerykańską procedurą TCLP. Wyniki wymywalności uzyskane obiema metodami nie przekraczały granicznych wartości tego parametru, określonych w polskim prawie. Obie metody charakteryzowały się również dobrą powtarzalnością wyników. Zastosowanie roztworu kwasu octowego (metoda TCLP) spowodowało jednak trzykrotnie większe wymycie arsenu z badanego odpadu w porównaniu do zastosowania wody dejonizowanej jako cieczy wymywającej (metoda PN-EN 12457). Należałoby w związku z tym rozważyć stosowanie testów z użyciem kwasów organicznych w przypadku składowania odpadów wydobywczych z odpadami komunalnymi, gdyż wyniki testu podstawowego opartego na wymywaniu czystą wodą mogą być nieadekwatne do rzeczywistej wymywalność arsenu w takich warunkach środowiskowych.
Przejdź do artykułu

Abstrakt

The aim of this work was to determine the effect of various cadmium and copper concentrations on the activated sludge dehydrogenase activity. The investigations were carried out in six aerated chambers with activated sludge, volume of 1L each, by the continuous culture method (one control chamber, not contaminated with heavy metals and five with 0.5; 1; 2; 4; 8 mg L-1 Cu+2 and 0.1; 0.3; 0.9; 2.7; 8.1 mg L-1 Cd2+). Cadmium sulfate and copper sulfate as a source of heavy metals were used. The concentrations of these metal ions, causing 50% dehydrogenase activity inhibition were determined. The particular attention was paid to the toxic effect of metal ions, as well as the variations of the microbial respiration activity proceeded during toxins exposition. The investigation showed that even the lowest concentration of the investigated metal ions caused significant changes of the activated sludge dehydrogenases activity. Copper ions showed to be more toxic than cadmium ions.
Przejdź do artykułu

Abstrakt

The article presents research results of physico-chemical and environmental issues for the dust generated during dedusting of the installation for the processing and preparation of moulding sand with bentonite. Particular attention was paid to the content of heavy metals and emission of gases from the BTEX group, which is one of the determinants of the moulding sands harmfulness for the environment. The analysis of heavy metals in the test samples indicate that there is an increase of the content of all metals in the dust compared to the initial mixture of bentonite. The most significant (almost double) increase observed for zinc is probably related to the adsorption of this element on the dust surface by contact with the liquid metal. The study showed, that dust contained more than 20% of the amount of montmorillonite and had a loss on ignition at a similar level. The addition of 1% of dust to the used moulding sand results in almost 30% increase in the total volume of gases generated in casting processes and nearly 30% increase of the benzene emission.
Przejdź do artykułu

Abstrakt

The aim of this study was to identify a suitable lichen species for the long−term monitoring of heavy−metal atmospheric pollution in Svalbard. Cladonia and Cetraria s.l. species that have been widely used until now for assessing heavy−metal deposition in the Arctic are in decline over extensive areas of Svalbard, mainly due to climate change and over−grazing by reindeer. Cetrariella delisei , rarely used for biomonitoring, is still common and widespread in this area. Levels of Cr, Ni, Fe, Cu, Pb, Zn, Cd and Mn were measured in three lichen species: Cetrariella delisei , Cladonia uncialis , Flavocetraria nivalis and in a moss Racomitrium lanuginosum from Sørkapp Land, South Spitsbergen. The results imply that Cetrariella delisei can be safely compared to Cladonia uncialis for identifying the levels of heavy metals, but direct comparison between Cetrariella delisei and other species studied is more difficult owing to differences in levels of heavy metals even in samples from the same site.
Przejdź do artykułu

Abstrakt

The investigations were carried out in order to assess the effect of thermophilic fermentation on changes in concentration of seven congeners with codes: 28, 52, 101, 118, 138, 153 and 180 in sewage sludge. The total concentration of PCBs was the highest before the process of thermophilic fermentation. On the tenth day of the process of fermentation it was found that the total concentration of LCB doubled the previous level, whereas in higher chlorinated PCBs this value decreased twice. After the process of thermophilic digestion, all the determined congeners of PCBs were still present. However, their total concentration was reduced by 84% on the fourteenth day of the process. Low concentration of heavy metal ions in the liquid phase of sewage sludge was observed. The metal ions precipitated and remained bound throughout the stabilization process. Metal speciation analysis was performed, and revealed some changes in the chemical forms of the metals during the stabilization process of sludge. The highest increase of zinc, copper, nickel, cadmium, and chromium concentration was observed in the organic-sulfide fraction, whereas the highest increase of lead was found in the residual fraction. Thermophilic methane fermentation did not cause the accumulation of heavy metals in the mobile fractions of sludge.
Przejdź do artykułu

Abstrakt

The aim of this study was to determine the effect of different zinc and iron concentrations in culture medium on growth and development of maize and wheat seedlings in terms of their inoculation with bacteria of Azospirillum genus. Maize and wheat in vitro cultures were inoculated, respectively, by strains of Azospirillum lipoferum and Azospirillum brasilense strains. The experimental factor was the supplementation of the culture medium with zinc (25, 200 and 600 mg·kg-1 of the medium) and iron (25, 200 and 600 mg·kg-1 of the medium). Counts of bacteria from the Azospirillum genus were analysed and plant seedling growth and development as well as the content of chlorophyll in plant leaf blades were monitored. Zinc turned out to reduce strongly numbers of bacteria of the Azospirillum genus. Azospirillum brasilense turned out to be particularly sensitive to elevated levels of this chemical element in the environment. The negative influence of increased quantities of zinc on cereal seedlings became apparent only after the application of the highest concentrations of this metal in the medium (600 mg·kg-1), while quantities which did not exceed 200 mg·kg-1 exerted a stimulation effect on the mass of maize and wheat seedlings. Iron added to the culture medium in quantities which did not exceed 200 mg·kg-1 did not reduce numbers of bacteria of the Azospirillum genus; on the contrary, they stimulated their growth. However, at higher concentrations, this metal turned out to exert a strong negative impact on the chlorophyll content in leaf blades as well as on the mass of maize and wheat seedlings. The inoculation with bacteria of the Azospirillum genus exerted a positive influence on the mass increase of maize and wheat seedlings and increased chlorophyll concentrations in leaf blades. At the same time, it contributed significantly to limiting or even levelling out the toxic impact of zinc and iron during the initial phases of plant growth and development.
Przejdź do artykułu

Abstrakt

This paper presents the results of study on heavy metals in soil and in herbaceous plants in selected pine forests in Słowiński National Park. The heavy metals, such as Zn, Cu, Mn and Fe were studied. Concentrations of zinc in tested soil are strongly and very strongly related to manganese and copper content (r = 0.57 do r = 0.98, p < 0.05). Moreover, the soil moistening has vital impact on copper content in the plants of the ground cover. It was also found that moss in comparison to other forest plants captures higher volume of zinc and copper. The content of the above mentioned metals in the plants of dry coniferous forests (Bs), fresh coniferous forests (Bśw) and humid coniferous forests (Bw) of the ground cover constitute the following decreasing series: Mn(438.1) > Fe(98.6) > Zn(35.2) > Cu(3.5).
Przejdź do artykułu

Abstrakt

The aim of the presented research was to analyse the pollution of the Kozłowa Góra Dam Reservoir with PCBs (28, 52, 101, 118, 138, 153, 180) and heavy metals (Zn, Cu, Ni, Cd, Pb, Cr). The investigated water and bottom sediments were sampled from two sampling points in November, 2009. The sampling points were located in the southern part of the Kozłowa Góra Dam Reservoir. The samples of bottom sediments were taken from the surface layer of 5 cm thickness. The extraction of PCBs from the bottom sediments was performed according to the EPA 3550B standard. For the sequential extraction analysis of metals from the sampled bottom sediments, the method suggested by Tessier was applied. Based on the obtained results the water and bottom sediments from the Kozłowa Góra Dam Reservoir were polluted with polychlorinated biphenyls. The highest concentration of the investigated PCB congeners in bottom sediments was determined in the sampling point No. 1 (2.78 µg/kg d.m.), whereas in the sampling point No. 2 this level was over 20-fold lower which might result from the inflow of these compounds with the waters of the Brynica river. In both sampling points the investigated bottom sediments were predominated by higher chlorinated PCBs with comparable contents of 86% and 85%, respectively. The level of pollution in the investigated bottom sediments (calculated per dry matter) with polychlorinated biphenyls did not exceed the level of TEL (< 0.02 mg/kg). The PEL value (3.5 mg/kg) was exceeded in the case of cadmium in the bottom sediment from the sampling point No. 2 and also lead (91 mg/kg) from both sampling points. The first two fractions with the mobile forms of metals are the most sensitive fractions to any changes of the environmental conditions in the benthic zone. In those fractions significant contents of lead, cadmium, nickel and zinc were observed.
Przejdź do artykułu

Ta strona wykorzystuje pliki 'cookies'. Więcej informacji