As a machining technology, welding can cause serious accidents by overloading or operation mistakes. Through analyzing the causes of various welding accidents, we found that the major cause for damage imposed after welding parts are loaded is the fracture of materials. Therefore, studying the influence of welding residual stress on the fracture property of materials is of great significance. This paper applied the digital image correlation technique to study the fracture property of welding parts under the influence of welding residual stress. In addition, standard parts and welding parts were selected to carry out a contrast experiment. Room temperature tensile tests were performed on both standard parts and test pieces after residual stress measurement. Using displacement field and strain field data obtained through VIC-2D software, the stress intensity factor around the crack tip of each specimen under the conditions of small load was calculated and corresponding analysis was carried out.
Super-resolution image reconstruction utilizes two algorithms, where one is for single-frame image reconstruction, and the other is for multi-frame image reconstruction. Singleframe image reconstruction generally takes the first degradation and is followed by reconstruction, which essentially creates a problem of insufficient characterization. Multi-frame images provide additional information for image reconstruction relative to single frame images due to the slight differences between sequential frames. However, the existing super-resolution algorithm for multi-frame images do not take advantage of this key factor, either because of loose structure and complexity, or because the individual frames are restored poorly. This paper proposes a new SR reconstruction algorithm for images using Multi-grained Cascade Forest. Multi-frame image reconstruction is processed sequentially. Firstly, the image registration algorithm uses a convolutional neural network to register low-resolution image sequences, and then the images are reconstructed after registration by the Multi-grained Cascade Forest reconstruction algorithm. Finally, the reconstructed images are fused. The optimal algorithm is selected for each step to get the most out of the details and tightly connect the internal logic of each sequential step. This novel approach proposed in this paper, in which the depth of the cascade forest is procedurally generated for recovered images, rather than being a constant. After training each layer, the recovered image is automatically evaluated, and new layers are constructed for training until an optimal restored image is obtained. Experiments show that this method improves the quality of image reconstruction while preserving the details of the image.
Image segmentation is a typical operation in many image analysis and computer vision applications. However, hyperspectral image segmentation is a field which have not been fully investigated. In this study an analogue- digital image segmentation technique is presented. The system uses an acousto-optic tuneable filter, and a CCD camera to capture hyperspectral images that are stored in a digital grey scale format. The data set was built considering several objects with remarkable differences in the reflectance and brightness components. In addition, the work presents a semi-supervised segmentation technique to deal with the complex problem of hyperspectral image segmentation, with its corresponding quantitative and qualitative evaluation. Particularly, the developed acousto-optic system is capable to acquire 120 frames through the whole visible light spectrum. Moreover, the analysis of the spectral images of a given object enables its segmentation using a simple subtraction operation. Experimental results showed that it is possible to segment any region of interest with a good performance rate by using the proposed analogue-digital segmentation technique.
This paper presents application of optical microscope for evaluation of microtexture changes of coarse aggregate during simulated polishing in laboratory. Observations of the apparent changes on surfaces of seven different aggregates are presented. Simulation polishing of aggregate was performed in accordance with PN-EN 1097-8:2009. lmages of the aggregate surface were taken with the optical microscope in the reflection mode in particular stages of polishing. Digital images were analyzed. Standard deviation was determined on the basis of the histogram of intensities from digital images of the surfaces of aggregate grains which was assurned as the measure of changes in microtexture during simulated polishing (namely the σh parameter). Statistical analysis has shown that the changes of the σh parameter between the particular stages of polishing confirm certain trends related to the petrographic characteristic of the rocks. Aggregates which included minerals of similar hardness (granodiorite, dolomile, basalt) were more prone to polishing than gabbro and postglacial. Regeneration of the microtexture, the recovery to its original asperity, occurred in the case of quartz sandstone and steelmaking slag.
The water’s edge is the most iconic and identifiable image related to the city of Durban and in seeking an ‘authenticity’ that typifies the built fabric of the city, the image that this place creates is arguably the answer. Since its formal establishment as a settlement in 1824, this edge has been a primary element in the urban fabric. Development of the space has been fairly incremental over the last two centuries, starting with colonial infl uenced built interventions, but much of what is there currently stems from the 1930’s onwards, leading to a Modernist and later Contemporary sense of place that is moderated by regionalist infl uences, lending itself to creating a somewhat contextually relevant image. This ‘international yet local’ sense of place is however under threat from the increasingly prominent ‘global’ image of a-contextual glass high-rise towers placed along a non-descript public realm typical of global capital interests that is a hallmark of the turnkey project trends by developers from the East currently sweeping the African continent.
Words and images of the Republic: Italian political propaganda (1946–1948) – The article intends to highlight how the transition from monarchy to republic represents a significant boundary in Italian history not only from the institutional point of view but also from that of national political propaganda, in which words and images – the expression of a harsh ideological confrontation – contributed to the building of a national collective memory of which there are still evident and rooted traces in current political confrontation.
In Nantes, the last shipyard closed in 1986 leaving the city in a desperate situation. The cranes, symbolizing the industrial activity, one by one stopped. Unemployment stroked. The question was between turning the page, tearing down the workshops and reinventing a new story or trying to preserve would appear to most of the population, a kind of modern bulky legacy. In the early 2000’s, the revitalization of Nantes’ former industrial area, led to developing a new way thinking. Instead of designing an urban map with major spots and rows of housing, A. Chemetoff thought better to draw an urban landscape where the past could mix with the future. The industrial heritage has been then preserved in two diff erent ways: construction halls have been reshaped preserving the original structure, everything should be reversed. The intangible heritage, meaning worker’s knowledge, has been reinvested in the cultural industry. This way, the image of the city, its brand, moved from industrial to cultural, attracting a new kind of business, mainly high-tech, students, in a new: “art de Vivre” (Art of living).
The image analysis consists in extracting from the information which is available to the observer of the part that is important from the perspective of the investigated process. This process usually accompanies a considerable reduction in the amount of information from the image. In the field of two-phase flows, computer image analysis can be used to determine flow and geometric parameters of flow patterns. This article presents the possibilities of using this method to determine the void fraction, vapor quality, bubble velocity and the geometric dimensions of flow patterns. The use of computer image analysis methods is illustrated by the example of HFE 7100 refrigerant methoxynonafluorobutane condensation in a glass tubular minichannel. The high speed video camera was used for the study, and the films and individual frames received during the study were analyzed.
The domain of motion events is widely used to metaphorically describe abstract concepts, particularly emotional states. Why motion events are effective for describing abstract concepts is the question that this article intends to answer. In the literature of the field, several reasons have been suggested to be behind the suitability of motion events for describing these concepts, such as high concreteness of motion events, their high imageability, and the ability of comprehender to simultaneously imagine components of motion events. This article suggests that motion events are particularly effective for metaphorical description of those domains which have the feature of dynamic change over a period of time. This is particularly the case with emotional states. Since changes in emotions take place throughout a period of time, they could best be described by motion events which have the same feature. In other words, the continuous change in emotions is understood in terms of continuous change in the location of a moving object in the 3D space. Based on the arguments of embodied theories of cognition, it would be no surprise to see the involvement of similar areas of the brain in understanding emotions and motions.
The paper refers to the specific functional area, which identity was primarily based on the relationship with water – in major port cities, as well as related smaller settlemets. It discribes the phenomenon of using and reinterpreting the potential of a rich hydrographic network for constructing the contemporary spatial identity after the violent events of the 20th century. The case studies cited are differentiated due to the specifi city of the activities and the purpose of its implementation.
Landscape is an object of perception, while its image is the sum of ideas on this object. Both terms used in the title of the paper have fairly strong impact on each other. In order to manage the city’s image well, it is necessary to take care of the landscape in all its areas especially in the “forgotten” and degraded ones. The aim of the author was to identify elements of landscape exposure along railway lines – areas with low aesthetic value in many cities around the world. The research area includes railway lines, in Cracow and Wrocław. The method adopted for the implementation of the study is the analysis of mental maps made in 2018 during field workshops. The paper is ended by conclusions on the landscape impact on the image of the city.
Modern cities are increasingly promoting their own individual brands to gain a competitive advantage. 28 Polish cities, after joining the Cittaslow international network of cities, can additionally use their native brand in their activities. The aim of the author was to answer the question: should cities only use an individual brand, or maybe they can support these activities with a common brand strategy. The growth of interest in individual brands of 28 cities belonging to the Cittaslow network has been evaluated, also their popularity, popularity of the native brand on the Facebook, and the use of the Cittaslow brand by cities on their websites were analysed. It was noticed that not all cities use the Cittaslow logo. But most cities in Cittaslow publish a link to the network and brand information on their websites. The native brand Cittaslow is in Poland at the positioning stage but probably its popularity will grow as the benefits from using it begin to be noticed.
In this paper a review on biometric person identification has been discussed using features from retinal fundus image. Retina recognition is claimed to be the best person identification method among the biometric recognition systems as the retina is practically impossible to forge. It is found to be most stable, reliable and most secure among all other biometric systems. Retina inherits the property of uniqueness and stability. The features used in the recognition process are either blood vessel features or non-blood vessel features. But the vascular pattern is the most prominent feature utilized by most of the researchers for retina based person identification. Processes involved in this authentication system include pre-processing, feature extraction and feature matching. Bifurcation and crossover points are widely used features among the blood vessel features. Non-blood vessel features include luminance, contrast, and corner points etc. This paper summarizes and compares the different retina based authentication system. Researchers have used publicly available databases such as DRIVE, STARE, VARIA, RIDB, ARIA, AFIO, DRIDB, and SiMES for testing their methods. Various quantitative measures such as accuracy, recognition rate, false rejection rate, false acceptance rate, and equal error rate are used to evaluate the performance of different algorithms. DRIVE database provides 100% recognition for most of the methods. Rest of the database the accuracy of recognition is more than 90%.
Testing of image intensifier tubes is still done using mostly manual methods due to a series of both technical and legal problems with test automation. Computerized stations for semi-automated testing of IITs are considered as novelty and are under continuous improvements. This paper presents a novel test station that enables semi-automated measurement of image intensifier tubes. Wide test capabilities and advanced design solutions rise the developed test station significantly above the current level of night vision metrology.
This research proposes a method to enhance the payload message by embedding messages on the dilated edge areas by the Least Significant Bit (LSB) method. To add security aspects to messages, messages are not embedded directly on the LSB but encrypted with XOR operations with Most Significant Bit (MSB). The experimental results of the test in this study showed that the dilation process to some extent can increase the payload of 18.65% and the average bpp is 1.42 while maintaining the imperceptibilty quality of stego image with an average PSNR value of about 47 dB, SSIM is 0.9977 and MSE is 1.13.
A technology that utilizes penetrating rays is one of the oldest nondestructive testing methods. Nowadays, the process of radiogram analysis is performed by qualified human operators and automatic systems are still under development. In this work we present advanced algorithms for automatic segmentation of radiographic images of welded joints. The goal of segmentation of a radiogram is to change and simplify representation of the image into a form that is more meaningful and easier to analyse automatically. The radiogram is divided into parts containing the weld line, image quality indicators, lead characters, and possible defects. Then, each part is analysed separately by specialized algorithms within the framework of the Intelligent System for Radiogram Analysis.
Fractal analysis is one of the rapidly evolving branches of mathematics and finds its application in different analyses such as pore space description. It constitutes a new approach to the issue of their natural irregularity and roughness. To be properly applied, it should be encompassed by an error estimation. The article presents and verifies uncertainties along with imperfections connected with image analysis and expands on the possible ways of their correction. One of key aspects of such research is finding both appropriate place and the number of photos to take. A coarse- grained sandstone thin section was photographed and then pictures were combined into one, bigger image. Fractal parameters distributions show their change and suggest that the accurately gathered group of photos include both highly and less porous regions. Their amount should be representative and adequate to the sample. The resolution influence on the fractal dimension and lacunarity values was examined. For SEM limestone images obtained using backscattered electrons, magnification in the range of 120x to 2000x was used. Additionally, a single pore was examined. The acquired results point to the fact that the values of fractal dimension are similar to a wide range of magnifications, while lacunarity changes each time. This is connected with changing homogeneity of the image. The article also undertakes a problem of determining fractal parameters spatial distribution based on binarization. The available methods assume that it is carried out after or before the image division into rectangles to create fractal dimension and lacunarity values for interpolation. An individual binarization, although time consuming, provides better results that resemble reality to a closer degree. It is not possible to define a single, correct methodology of error elimination. A set of hints has been presented that can improve results of further image analysis of pore space.
According to the psycho-lexical approach in the taxonomy of individual differences, those interpersonal differences, which are the most important for social functioning of individual, have been encoded into natural languages. Therefore by analyzing the lexicons of interpersonal differences, it is possible to identify structures of their descriptions. Application of the psycho-lexical approach in the field of psychology of individual differences lead to obtaining the relatively high consistency regarding scientific taxonomy of personality traits. Also models developed on this basis meet the most important criteria of goodness of the psychological structural models. As a result, the accumulation of knowledge about person’s psychological functioning have been intensified. The aim of the article is to present the specificity of lexical studies and their taxonomical potential for social sciences, as well as key threats and limitations, based on experience of previous psycho-lexical research.
The article deals with the issue of the meaning of the Polish early education coursebooks for conservation/change in educational practices. It is the liberal and constructivist discourse to which the coursebook authors should refer (especially in the context of the present time and democracy) if these books are to become a tool of the prodevelopmental and emancipatory interest of both students and society. However, the research on Polish coursebooks for early education (grades I – III), show that this very condition has not been ful3 lled. In such a situation it is the German school coursebooks that might be inspiring because of their discursive background as well as of the methodological proposals and the range of content present in them. The article is also an attempt to reconstruct “the image of school” present in German early education coursebooks. It is possible to name and describe the key dimensions in this image such as: the democratic nature of teacher-student relations, the focus on the activation of students’ personal knowledge as well as on their ethical and cognitive autonomy, realistic vision of the world, trust in students’ competences, and creating the sphere of the nearest development.
In this paper methods and their examination results for automatic segmentation and parameterization of vessels based on spectral domain optical coherence tomography (SD-OCT) of the retina are presented. We present three strategies for morphologic image processing of a fundus image reconstructed from OCT scans. A specificity of initial image processing for fundus reconstruction is analysed. Then, the parameterization step is performed based on the vessels segmented with the proposed algorithm. The influence of various methods on the vessel segmentation and fully automatic vessel measurement is analysed. Experiments were carried out with a set of 3D OCT scans obtained from 24 eyes (12 healthy volunteers) with the use of an Avanti RTvue OCT device. The results of automatic vessel segmentation were numerically compared with those prepared manually by the medical doctor experts.
The airflow in the mouth of an open and closed flue organ pipe of corresponding geometrical proportions is studied. The phase locked particle image velocimetry with subsequent analysis by the biorthogonal decomposition is employed in order to compare the flow mechanisms and related features. The most significant differences lie in the mean velocity distribution and rapidity of the jet lateral motion. Remarks on the pressure estimation from PIV data and its importance for the aeroacoustic source terms are made and a specific example is discussed.
B a c k g ro u n d: Arterial hypertension (HTN) ranks among the most widespread chronic illnesses that affect adults in industrialized societies. The main goal of this study was to describe the control (inhibition) processes among HTN patients, and to evaluate the dynamics of brain activity while the patients were engaged in tasks measuring the cognitive aspect of self-control. P a r t i c i p a n t s a n d p ro c e d u re: A set of neuropsychological tests (California Verbal Learning Test, Color Trails Test, The Trail Making Test, Controlled Oral Word Association Test), and a fMRI Stroop test (rapid event design) were administered to 40 persons (20 HTN patients and 20 controls). Groups were matched in terms of age, sex, education, smoking history, and waist-to-hip ratio. R e s u l t s: As revealed by fMRI, the HTN patients demonstrate left-hemisphere asymmetry in inhibitory processes. Also around 90% of patients had problems when completing tasks which rely on verbal and graphomotor aspects of self-control. C o n c l u s i o n s: The results suggest that both cerebral hemispheres must interact correctly in order to provide successful executive control. The deficiencies in control and executive functioning, which were observed among the patients, prove that HTN negatively affects brain processes that control one’s cognitive activity.
The article undertakes quastion of urban design in a context of urban sprawl linking it to the German debate on suburbanisation, conducted under the slogan of Zwischenstadt – a concept created by Th. Sieverts in 1997. The Ladenburger Kolleg „Zwischenstadt” (LKZ) developed 2002-2006 the interdisciplinary research titled: „Amidst the Edge: Zwischenstadt – towards the qualification of the urbanised landscape” The spatial effects of the dispersion processes were considered to be the manifestation of the creation of a new model of the city. The traditional image of urbanism does not fit its logic. Zwischenstadt (in-beetwen-city) recognized as a phase of the urbanization process, uncoordinated by any imposed urban vision, requires a innovative urban design leitmotives. This new planning tool is necessary to obtain the parameters needed to strengthen internal socio-economic development capabilities. The concept of the efficiency of urban design covered the issue of the character of a city›s image. The morphological studies on a megalopolis structure by Frankfurt a. Main, made a creative use of the Lynch research on the image of the city. Their main goal was to understand the characteristics of the dispersion meant as an urbanized landscape and to determine its susceptibility to the process of improving spatial quality – recognition of the endogenous potentials of generating a Zwischenstadt image.
The aim of the paper was to develop determination methods of sedimentation characteristics using PIV image anemometry and suspension image analysis. Two methods of the investigation of sed- imentation process based on visualization techniques were developed. In the first one, using PIV method, vector fields of the velocity of settling particles are determined and then average particle velocities are calculated to establish the so called sedimentation dynamics curve. In the second one, the methods of suspension image analysis are utilized to determine the positions of the upper dis- continuity and to establish the sedimentation curve. Laboratory research on the sedimentation of agalit particles suspended in glycerine was conducted (using PIV method). Additionally, industrial research on the sedimentation of water-absorbing granular material used after the first carbonation (carbonation I) was conducted in a sugar factory (using the second method). The research consisted of photographic registration of images of the settling suspension by means of the time-lapse photog- raphy technique. A laboratory study was conducted for four values of the volume concentration of agalit particles in glycerine (0.5; 1.0; 1.5 and 2.0 vol%). The research methodology, the scope of the conducted measurements and sample research results together with conclusions are presented in this paper.
This paper presents the qualitative and quantitative characteristics of microstructures of Neogene clays from Warsaw, Poland. Scanning Electron Microscope (SEM) studies were used for the microstructural analysis of natural clays and clay pastes. Qualitative microstructural changes were observed: from a honeycomb microstructure for the initial clay paste to a turbulent microstructure for the dried paste. It was also noticed that water loss caused by the increase of the suction pressure had a significant impact on the microstructural transformations. Significant changes in the quantitative values of the pore space parameters were also observed. Increase of suction pressure and water loss caused a decrease in porosity and changes in the values of morphometric parameters, such as pore distribution; for example, a significant increase of the number of pores of 0−10 μm size and changes in the geometric parameters of the pore space were noticed with the increase of suction pressure. The pore space with larger isometric pores was modified into a pore space with the dominance of small anisometric and fissure-like pores. The increased degree of anisotropy from a poorly-oriented to a highly-oriented microstructure was also observed. After rapid shrinkage the reduction in the number of pores, maximum pore diameter, and total pore perimeter was recorded. The process of rapid water loss induced the closure of very small pores. A similar effect was observed during the increase of the suction pressure, where the closure of pore space of the clay pastes was observed very clearly.