Search results

Filters

  • Journals
  • Authors
  • Keywords
  • Date
  • Type

Search results

Number of results: 12
items per page: 25 50 75
Sort by:

Abstract

The paper focuses on the modelling of bromate formation. An axial dispersion model was proposed to integrate the non-ideal mixing, mass-transfer and a kinetic model that links ozone decomposition reactions fromthe Tomiyasu, Fukutomi and Gordon (TFG) ozone decaymodelwith direct and indirect bromide oxidation reactions, oxidation of natural organicmatter and its reactionswith aqueous bromine. To elucidate the role of ammonia an additional set of reactions leading to bromamine formation, oxidation and disproportionation was incorporated in the kinetic model. Sensitivity analysis was conducted to obtain information on reliability of the reaction rate constants used and to simplify the model.
Go to article

Abstract

Almost all matter in our Universe exists in the form of plasma. Although it’s not easy to generate on Earth, it has a vast range of applications in medicine, biotechnology, farming and industry.
Go to article
Keywords de-NOx ozone mixing

Abstract

The influence of ozone injection mode on the effectiveness of nitrogen monoxide oxidation to nitrogen dioxide by ozone in a flow reactor was investigated experimentally in laboratory apparatus. Nitrogen monoxide was diluted to the mole fraction 100 ppm in air which served as the carrier gas flowing through the tube of the diameter D = 60 mm into which ozone was injected. The effects of a number of ozone injecting nozzles and their configuration on the effectiveness of NO oxidation were examined. In the closest vicinity from the injection site the counter-current injection mode appeared to be superior to the co-current injection mode, but in areas located further from the injection site both injection systems were almost equally effective.
Go to article

Abstract

Although the utilization of pesticides accounted for the group of persistent organic pollutants was banned years ago, a count of pesticides are still directly or indirectly a source of contamination in Europe. One of them, simazine is still allowed for use in the United States. Aim of this experiment was development of soil remediation method which could be utilized for degradation triazine class pesticides – simazine was an example used. A method for soil remediation based on ozonation processes in fluidized bed was successfully utilized for removal of simazine from contaminated soil. For the study soil highly contaminated with simazine up to the concentration of 0.05% w/w was used. Determination of the pesticide levels in soil was performed using extraction and gas chromatography. The method allowed 80% reduction of pesticide concentration level. The degradation of pesticide was accompanied with changes of physicochemical parameters of soil, i.e., decrease of pH and a increase of nitrates concentration. Despite changes in physicochemical properties of the soil, the developed method proved to be highly effective and can be successfully applied on an industrial scale.
Go to article

Abstract

Validation results of a theoretical model that describes the formation of bromate during ozonation of bromide-containing natural waters are presented. An axial dispersion model integrating the nonideal mixing, mass-transfer and a kinetic model that links ozone decomposition reactions from the Tomiyasu, Fukutomi and Gordon ozone decay model with direct and indirect bromide oxidation reactions, oxidation of natural organicmatter and reactions of dissolved organics and aqueous bromine was verified. Themodel was successfully validated with results obtained both at a laboratory and a full scale. Its applicability to different water supply systems was approved.
Go to article

Abstract

The study assessed the effect of cumulative tropospheric ozone on the morphology of an ozone-sensitive (Bel W3) and an ozone-resistant (Bel B) tobacco cultivar, and two petunia cultivars (Mirage, White Cascade). The plants were exposed at two sites differing in tropospheric ozone level for two months during the 2008 growing season. Similar sets of plants were cultivated in control conditions. Morphological parameters of the plants were measured every week during the experiment. The correlation between the recorded results and the cumulative concentrations of tropospheric ozone measured at the two exposure sites was estimated. The ozone-sensitive tobacco cultivar showed increased visible damage after four weeks of the experiment, although ozone was relatively low during the preceding weeks, possibly confirming the cumulative effect of ozone on the plant response. The ozone-resistant tobacco cultivar showed higher mean plant growth and leaf growth than the ozone-sensitive one throughout the experimental period, but at the exposure sites the ozone-sensitive cultivar showed plant growth similar to or higher than the controls, especially at the forest site where ozone concentrations were higher. This suggests a plant defense against reduction of leaf assimilation area (i.e., against leaf necrosis). Petunia cv. Mirage showed lower growth at the control site and had fewer flowers than White Cascade at all sites. White Cascade had more flowers than Mirage in the last week of the experiment at the forest site where tropospheric ozone was higher. Its mean growth was higher at the forest site than at the other exposure site
Go to article

Abstract

New technologies and the globalization of the electrical and electronic equipment market cause a continuous increase in the amount of electrical and electronic waste. They constitute one of the waste groups that grows the fastest in quantity. The development of the new generation of electrical and electronic devices is much faster than before. Recently attention has been concentrated on hydrometallurgical methods for the recovery of metals from electronic waste. In this article the role of an oxidizing agent, mainly ozone and hydrogen peroxide was presented in hydrometallurgical processes. Leaching process of printed circuits boards (PCBs) from used cell phones was conducted. The experiments were carried out in the presence of sulfuric acid and ozone as an oxidizing agent for various temperatures, acid concentration, ozone concentration. As a result, the concentrations of copper, zinc, iron and aluminum in the obtained solution were measured. The obtained results were compared to results obtained earlier in the presence of hydrogen peroxide as an oxidizing agent and discussed.
Go to article

Abstract

Results of laboratory scale research have been presented on the effects of an oxidizing reactor on ozone consumption and by-producs composition and separation of simultaneous NOx and SO2 removal from a carrier gas by ozonation method and absorption in an alkaline solution. The additional Dreschel washer added before two washers containing 100 ml of 0.1 molar NaOH solution played the role of an oxidation reactor. Its effect was investigated using an empty (dry or wetted) or filled with packing elements washer. The measured by-products in a scrubber and in the oxidizing reactor were SO32-, SO42-, NO2- and NO3- ions, respectively. It has been shown that use of oxidizing reactor improves NOx removal efficiency reducing ozone consumption. Wetting of the oxidation reactor with water enables a preliminary separation of sulphur and nitrogen species between the oxidizing reactor and an alkaline absorber. Application of packing elements in the oxidizing reactor allows to retain 90% of nitrogen compounds in it. Some results were confirmed by tests in pilot scale.
Go to article

Abstract

The possibility of producing 3-aminobenzyl alcohol and 3-aminobenzaldehyde by oxidation of 3-aminotoluene with ozone in the solution of acetic anhydrite in the presence of manganese (II) acetate, potassium bromide and sulfuric acid has been shown. The catalytic systems for regulating selectivity and depth of substrate oxidation has been developed. The catalytic system Mn(OAc)₂ – Ac₂0 – H₂SO₄ promotes the formation of alcohol (65.5%) and 3- acetylaminobenzylidendiacetate (20.1%) with the system Mn(OAc)₂ – KBr – Ac₂O – H2SO₄ increases oxidation selectivity on the methyl group to 90.8% producing mainly aldehyde (80.8%) The optimum temperature of selective oxidation of 3– aminotoluene with the ozone – air mixture (30°C) which is much lower than that of oxidation by the known methods (120°-240°C) and the optimum rations of the reagents concentrations: for alcohol synthesis – [ArCH3] : [Mn(OAc)₂] : [H₂SO₄] =1 : 0.2 : 2.5; for aldehyde synthesis –[ ArCH3]: [Mn(OAc)₂] : [KBr] aldehyde synthesis – [ArCH3] : [Mn(OAc)₂] : [KBr] : [H₂SO₄] = 1:0.2:2.5 have been determined.
Go to article

Abstract

Tropospheric ozone is one of the most reactive air pollutants, which causes visible injuries, as well as biomass and yield losses. The negative effect of ozone is cumulative during the growing season; hence crops are the most sensitive plants. Visible symptoms and biomass losses can cause economic losses. Tobacco plants have been recognized as one of the best bioindicators, but data on the cumulative effect of ozone on this species are limited. Results of an experiment with ozone-sensitive tobacco plants grown on sites varying in ozone concentration are presented in this paper. Two indices were used for data presentation of visible leaf injury degree. Higher solar radiation was the main cause of higher ozone concentration at the rural site. Higher tropospheric ozone concentrations were noted in 2010 in comparison to 2011, which was reflected in visible leaf injury. Canonical variate analysis did not reveal highly significant differences between sites, however, differences were observed in certain investigation periods. Moreover, higher leaf injury was noted at the rural site at the end of the experiment in both experimental years. This indicates the cumulative effect of ozone during the growing season. However, higher injury variability was noted at the urban site, even though lower ozone concentrations were noted there. Lower variability of injury at the rural site might suggest lack of influence of particulate matter and occurrence of higher injury even though lower ozone concentrations occurred. Better detection of ozone injury was shown by the first index based on three mean values.
Go to article

Abstract

In this paper, we present results indicating ozone effect on visible plants response as well as on other parameters, such as dry weight, chlorophyll concentration, cell membrane stability and salicylic acid content in bioindicator plants. Ozone-resistant and -sensitive clones of white clover (Trifolium repens L. cv. "Regal") were used in the investigations. The experiment was carried out in ambient air conditions of the Wielkopolska province (Poland) in 2005 growing season. The exposure led to changes in the level of plant response parameters that might be used as potential biomarkers of oxidative stress triggered by tropospheric ozone in ambient air conditions.
Go to article

This page uses 'cookies'. Learn more