The present study aimed to test how common workaholism is and which groups are most targeted in the workplace among Jordanian employees. Additionally, the roles of positive and negative perfectionism in workaholism were investigated. The sample consisted of 686 employees. All of them completed the study instruments. The results showed that the mean of workaholism was around the mean of the cut -off. Additionally, multivariate tests showed that the results of post hoc differences for positive perfectionism were in favor of males, subordinates, those with a bachelor’s degree, those with less than 5 years of experience, and those aged less than 30 years. Furthermore, the differences for negative perfectionism were in favor of those with a bachelor’s degree and subordinates. For workaholism, the differences were in favor of subordinates, public sector employees, married persons, and those with a diploma degree. Finally, the results of hierarchical regression analysis found that positive and negative perfectionism and some demographic variables predicted 12.9% of the variability in workaholism, and the typical hierarchical regression model included positive and negative perfectionism without other demographic variables.
The term positive psychology has recently entered the field of Second Language Acquisition. The article explains the meaning of the term, presents the definitions of positive psychology, its objectives and history. The key part of the article demonstrates the importance of positive psychology in the second language acquisition presenting many connections between the two fields. The author recommends that positive education is introduced in every school and every foreign language classroom.
This paper analyses the performance of Differential Head-Related Transfer Function (DHRTF), an alternative transfer function for headphone-based virtual sound source positioning within a horizontal plane. This experimental one-channel function is used to reduce processing and avoid timbre affection while preserving signal features important for sound localisation. The use of positioning algorithm employing the DHRTF is compared to two other common positioning methods: amplitude panning and HRTF processing. Results of theoretical comparison and quality assessment of the methods by subjective listening tests are presented. The tests focus on distinctive aspects of the positioning methods: spatial impression, timbre affection, and loudness fluctuations. The results show that the DHRTF positioning method is applicable with very promising performance; it avoids perceptible channel coloration that occurs within the HRTF method, and it delivers spatial impression more successfully than the simple amplitude panning method.
The Paper presents the optical method of fixing the off-shore objects positions from the land. The method is based on application of two reference points, having the geographical coordinates de fined. The first point was situated high on the sea shore, where also the camera was installed. The second point was intended for use to determine the topocentric horizon plane and it was situated at the water-level. The first section of the Paper contains the definition of space and disposed therein reference systems: connected with the Earth, water-level and the camera system. The second section of the Paper provides a description of the survey system model and the principles of the Charge Coupled Device – CCD array pixel’s coordinates (plate coordinates) transformation into the geographic coordinates located on the water-level. In the final section there are presented the general rules of using the worked out method in the optical system.
The paper presents national report of Poland for IAG on positioning and applications. The selected research presented was carried out at leading Polish research institutions and concern precise multi-GNSS satellite positioning – relative and absolute – and also GNSS-based ionosphere and troposphere modelling and studies. The research resulted in noticeable advancements in these subjects confirmed by the development of new algorithms and methods. New and improved methods of precise GNSS positioning were developed, and also GNSS metrology was studied. New advanced troposphere models were presented and tested. In particular, these models allowed testing IPW variability on regional and global scales. Also, new regional ionosphere monitoring web-based services were developed and launched.
The presented preliminary research concerns the accuracy and reliability of new ultra-fast static positioning module – POZGEO-2 – in case of processing GPS data collected outside the ASG-EUPOS network. Such a case requires extrapolation of the network-derived atmospheric corrections which limits correction accuracy and, therefore, has adverse effect on the carrier phase ambiguity resolution. The presented processing tests are based on processing 5-minute long observing sessions and show that precise positioning can be supported up to 35 km from the ASG-EUPOS borders. This means that precise positioning with POZGEO-2 module can be assured for the most of the border areas of Poland.
A research study aimed at developing a novel indoor positioning system is presented. The realized system prototype uses sensor fusion techniques to combine information from two sources: an in-house developed local Ultra-Wideband (UWB) radio-based ranging system and an inertial navigation system (INS). The UWB system measures the distance between two transceivers by recording the round-trip-time (RTT) of UWB radio pulses. Its principle of operation is briefly described, together with the main design features. Furthermore, the main characteristics of the INS and of the Extended Kalman Filter information fusion approach are presented. Finally, selected static and dynamic test scenario experimental results are provided. In particular, the advantages of the proposed information fusion approach are further investigated by means of a high dynamic test scenario.
This paper presents a mechanical positioning system for a measuring microphone designed for acoustic studies in anechoic and reverberation chambers at the Department of Mechanics and Vibroacoustics, AGH. The results are discussed in the context of mechanical positioning and its impact on the outcome of the execution of individual measurement procedures. Moreover, areas for research were identified and solution concepts shown for further development of the automation of acoustic measurements in different research rooms in order to reduce the human involvement in them.
NHST (null hypothesis significance testing) is the most popular statistical paradigm in psychology. Mistakes in interpretation of its assumptions and their consequences are topic for methodological and statistical discussion for over fifty years. Article presents two problems associated with NHST that are particularly prevalent in psychology: identifying non-significant results with research failure and conducting underpowered research. They can contribute to increase in exploiting questionable research practices in order to obtain desirable, significant outcomes. Three practices: p-hacking, HARKing and selective publishing are described, along with analysis of their impact on replication crisis in psychological science.
The positivity and absolute stability of a class of nonlinear continuous-time and discretetime systems are addressed. Necessary and sufficient conditions for the positivity of this class of nonlinear systems are established. Sufficient conditions for the absolute stability of this class of nonlinear systems are also given.
The article is an attempt to analyze the spatio-pedagogical discourse of the German social pedagogy. It represents only a fragment of reflection on the turns in paradigm of place/ space (spatial turn), as pedagogical terms. & e authors seek to answer the question what is the space and place, and what concepts in the field of reflection on the place/space run in the German social pedagogy. The text introduces, inter alia, the relational concept of space developed by Martina Löw, duality of space and the concept of spacing. Active creation of urban space, the spatial dimension of the relationship and its dynamics are subjected to discussion. The article presents critical approach to the notion of transdisciplinary space, and space-oriented social work. Finally, it provides the incentive for in-depth, international analyzes of spatio-pedagogical theories.
In the article an attempt is made to analyze the aspects of non-dogmatic spirituality of characters in the prose works of Ukrainian postm odernists (including Yuriy Andrukhovych, Oksana Zabuzhko, Yuriy Izdryk, Natalia Sniadanko). The theoretical aspects of problem are considered in the context of analytical psychology of Carl Gustav Jung. The following concepts play an important role in the study: religious position, father complex, conflict and some others.
I investigate Husserl’s long-term research on revealing/constructing a proper idea of science. For Husserl this idea was of tremendous importance: it had to be the basis of forming a (the) proper philosophy (phenomenology), that is, a philosophy which was to be an exact science, a new and higher form of science. According to Husserl, the idea of science is not a free project of individual researchers, scientific communities, but the very essence of science—changeless, universal, nontransformable, non-culturally and socially loaded, ahistorical, and non-relativized to scientific praxis. It was attempt to determine a new status of philosophy which led Husserl’s to the consideration of a universal idea of science.
Position time series from permanent Global Navigation Satellite System (GNSS) stations are commonly used for estimating secular velocities of discrete points on the Earth’s surface. An understanding of background noise in the GNSS position time series is essential to obtain realistic estimates of velocity uncertainties. The current study focuses on the investigation of background noise in position time series obtained from thirteen permanent GNSS stations located in Nepal Himalaya using the spectral analysis method. The power spectrum of the GNSS position time series has been estimated using the Lomb–Scargle method. The iterative nonlinear Levenberg–Marquardt (LM) algorithm has been applied to estimate the spectral index of the power spectrum. The power spectrum can be described by white noise in the high frequency zone and power law noise in the lower frequency zone. The mean and the standard deviation of the estimated spectral indices are ��1:46#6;0:14;��1:39#6;0:16 and ��1:53#6;0:07 for north, east and vertical components, respectively. On average, the power law noise extends up to a period of ca. 21 days. For a shorter period, i.e. less than ca. 21 days, the spectra are white. The spectral index corresponding to random walk noise (ca. –2) is obtained for a site located above the base of a seismogenic zone which can be due to the combined effect of tectonic and nontectonic factors rather than a spurious monumental motion. Overall, the usefulness of investigating the background noise in the GNSS position time series is discussed.
This paper presents the comparison of filtering methods – median filtration, moving average Kalman filtration and filtration based on a distance difference to determine the most accurate arm length for circular motion, as a model of wind turbine propellers movement. The experiments have been performed with the UWB technology system containing four anchors and a tag attached to 90cm arm that was rotated with speed up to 15.5 rad/s (as a linear speed of 50km/h). The trilateration concept based on the signal latency has been described in order to determinate the position of an object on circular trajectory. The main objective is the circle plane rotation (parallel and perpendicular) with respect to the anchors plane reference system. All research tasks have been performed for various cases of motion schemes in order to get the filtration method for object in motion under best accuracy goal. Filtration methods have been applied on one of two stages of the positioning algorithm: (1) on raw data got from the single anchor-tag (before trilateration); (2) on the position obtained from four anchors and tag (after trilateration). It has been proven that the appropriate filtering allows for higher location accuracy. Moreover, location capabilities with the use of UWB technology – shows prospective use of positioning of objects without access to other positioning forms (ex. GPS) in many aspects of life such as currently developing renewable, green energy sources like wind turbines where the circular motion plays an important role, and precise positioning of propellers is a key element in monitoring the work of the whole wind turbine.
The paper presents a method of obtaining short-termpositioning accuracy based on micro electro-mechanical system (MEMS) sensors and analysis of the results. A high-accuracy and fast-positioning algorithm must be included due to the high risk of accidents in cities in the future, especially when autonomous objects are taken into account. High-level positioning systems should consider a number of sub-systems such as global positioning system (GPS), CCTV – video analysis, a system based on analysis of signal strength of access points (AP), etc. Short-term positioning means that there are other locating systems with a sufficiently high degree of accuracy based on, e.g. a video camera, but the located object can disappear when it is hidden by other objects, e.g. people, things, shelves etc. In such a case, MEMS sensors can be employed as a positioning system. The paper examines typical movement profiles of a radio-controlled (RC) model and fundamental filtering methods in respect of position accuracy. The authors evaluate the complexity and delay of the filter and the accuracy of the positioning in respect of the current speed and phase of movement (positive acceleration, constant) of the object. It is necessary to know whether and how the length of the filter changes the position accuracy. It has been shown that the use of fundamental filters, which provide solutions in a short time, enables to locate objects with a small error in a limited time.
This elaboration presents the method of virtual positioning of the construction of an endoprosthesis of hip joint in a patient’s pelvis and femoral bone, reconstructed on the basis of imaging obtained from computer tomography. It is based on the matching of an implant to individual anatomical-biomechanical conditions. The method is established on the following procedures: diagnostic, spatial modeling, virtual measuring and targeted biometrological application for the model of bone structures. The final effect of the completed procedures is selection and optimal positioning of the endoprosthesis of hip joint before a planned medical intervention. The determined geometrical parameters of bone structures and settled positioning of the endoprosthesis can create data for the system of computer navigation.
This review paper presents research results on geodetic positioning and applications carried out in Poland, and related to the activities of the International Association of Geodesy (IAG) Commission 4 “Positioning and Applications” and its working groups. It also constitutes the chapter 4 of the national report of Poland for the International Union of Geodesy and Geodynamics (IUGG) covering the period of 2015-2018. The paper presents selected research, reviewed and summarized here, that were carried out at leading Polish research institutions, and is concerned with the precise multi-GNSS (Global Navigation Satellite Systems) satellite positioning and also GNSS-based ionosphere and troposphere modelling and studies. The research, primarily carried out within working groups of the IAG Commission 4, resulted in important advancements that were published in leading scientific journals. During the review period, Polish research groups carried out studies on multi-GNSS functional positioning models for both relative and absolute solutions, stochastic positioning models, new carrier phase integer ambiguity resolution methods, inter system bias calibration, high-rate GNSS applications, monitoring terrestrial reference frames with GNSS, assessment of the real-time precise satellite orbits and clocks, advances in troposphere and ionosphere GNSS remote sensing methods and models, and also their applications to weather, space weather and climate studies.
The accuracy and reliability of Kalman filter are easily affected by the gross errors in observations. Although robust Kalman filter based on equivalent weight function models can reduce the impact of gross errors on filtering results, the conventional equivalent weight function models are more suitable for the observations with the same noise level. For Precise Point Positioning (PPP) with multiple types of observations that have different measuring accuracy and noise levels, the filtering results obtained with conventional robust equivalent weight function models are not the best ones. For this problem, a classification robust equivalent weight function model based on the t-inspection statistics is proposed, which has better performance than the conventional equivalent weight function models in the case of no more than one gross error in a certain type of observations. However, in the case of multiple gross errors in a certain type of observations, the performance of the conventional robust Kalman filter based on the two kinds of equivalent weight function models are barely satisfactory due to the interaction between gross errors. To address this problem, an improved classification robust Kalman filtering method is further proposed in this paper. To verify and evaluate the performance of the proposed method, simulation tests were carried out based on the GPS/BDS data and their results were compared with those obtained with the conventional robust Kalman filtering method. The results show that the improved classification robust Kalman filtering method can effectively reduce the impact of multiple gross errors on the positioning results and significantly improve the positioning accuracy and reliability of PPP.
The presented article points to the issues of self-consciousness and the possibilities of its development. It defines in this context also concepts of self-evaluation, self-respect, self-appreciation, self-recognition, self-confidence and self-realization. In the text, it is emphasized that self-consciousness is related to the awareness of one´s own psychophysical and social identity - I myself and the world and my place in it. An important means for the development of the healthy self-consciousness is also praise. In the conclusion of the article, attention is paid to the psycho-hygiene as prevention of the failure.
There is a growing body of research investigating the relationships among gratitude, self-esteem, and subjective well-being. However, there remains a scarcity of research examining the impact of self-esteem on the relationship between gratitude and subjective well-being within Arabic context. In this study, 300 Arabic speaking adults completed measurements of gratitude, self-esteem, satisfaction with life, and positive and negative experiences. Participants’ ages ranged between 18 and 54 years with a mean age of 29.67 years (SD = 8.91). The correlation results revealed that there were significant positive relationships between gratitude, self-esteem, satisfaction with life, and positive experience, while there were significant negative relationships between gratitude, self-esteem, satisfaction with life, and negative experience. The results also showed that gratitude and self-esteem directly predicted subjective well-being. Additionally, using structural equation modeling, self-esteem exerted a mediation effect on the relationship between gratitude and subjective well-being. The results suggest that enhancing self-esteem could assist adults who have gratitude to experience greater subjective well-being. Using the source of self-esteem, researchers and professionals could improve one’s subjective wellbeing by employing various gratitude activities.
The major downside of blasting works is blast vibrations. Extensive research has been done on the subject and many predictors, estimating Peak Particle Velocity (PPV), were published till date. However, they are either site specific or global (unified model regardless of geology) and can give more of a guideline than exact data to use. Moreover, the model itself among other factors highly depends on positioning of vibration monitoring instruments. When fitting of experimental data with best fit curve and 95% confidence line, the equation is valid only for the scaled distance (SD) range used for fitting. Extrapolation outside of this range gives erroneous results. Therefore, using the specific prediction model, to predetermine optimal positioning of vibration monitoring instruments has been verified to be crucial. The results show that vibration monitoring instruments positioned at a predetermined distance from the source of the blast give more reliable data for further calculations than those positioned outside of a calculated range. This paper gives recommendation for vibration monitoring instruments positioning during test blast on any new site, to optimize charge weight per delay for future blasting works without increasing possibility of damaging surrounding structures.
The key to fingerprint positioning algorithm is establishing effective fingerprint information database based on different reference nodes of received signal strength indicator (RSSI). Traditional method is to set the location area calibration multiple information sampling points, and collection of a large number sample data what is very time consuming. With Zigbee sensor networks as platform, considering the influence of positioning signal interference, we proposed an improved algorithm of getting virtual database based on polynomial interpolation, while the pre-estimated result was disposed by particle filter. Experimental result shows that this method can generate a quick, simple fine-grained localization information database, and improve the positioning accuracy at the same time.
Technical development, new applications and requests for increased accuracy in georeferencing are setting new demands for accuracy and reliability of reference frames. Due to crustal deformations and local movements of benchmarks, a static reference network deteriorates with time, thus eventually requiring update of the whole system. Technically, renewal of a reference frame is straightforward and should be done whenever enough new data or updated information exist to get an improvement in accuracy. An example is the International Terrestrial Reference Frame, ITRF, which is renewed regularly. The situation is more complicated with national reference frames which may have been given a legal status, and parameters defined by the national legislation. Even without that, renewal and implementation of such a frame is a multi-million euro project taking years to complete. Crustal deformations and movements deteriorate static reference frames (defined by fixed/static coordinates of benchmarks) with time. Eventually, distortions in a static reference frame will become bigger than the uncertainties of GNSS measurements, thus deteriorating the obtainable accuracy of the measurement technique. Instead of a static reference frame, one can use semi-kinematic or kinematic approach where either the transformation from global to the national reference frame or the coordinates of reference frame benchmarks are time-dependent. In this paper we give a short overview of the topic, and discuss on technical issues and future aspects of the reference frames in the viewpoint of National Mapping and Cadastre Authorities (NMA) with an example on the national strategy in Finland.
A robust Kalman filter improved with IGG (Institute of Geodesy and Geophysics) scheme is proposed and used to resist the harmful effect of gross error from GPS observation in PPP/INS (precise point positioning/inertial navigation system) tightly coupled positioning. A new robust filter factor is constructed as a three-section function to increase the computational efficiency based on the IGG principle. The results of simulation analysis show that the robust Kalman filter with IGG scheme is able to reduce the filter iteration number and increase efficiency. The effectiveness of new robust filter is demonstrated by a real experiment. The results support our conclusion that the improved robust Kalman filter with IGG scheme used in PPP/INS tightly coupled positioning is able to remove the ill effect of gross error in GPS pseudorange observation. It clearly illustrates that the improved robust Kalman filter is very effective, and all simulated gross errors added to GPS pseudorange observation are successfully detected and modified.