The region’s development potential is a set of endogenous features that determine the growth of the local economy. It supports the development of knowledge, innovation and eff ective competition on global markets. The publication argues that saturation with potential may not be enough to cause economic growth. The distribution of potential is also important: concentration is its catalyst. The study proposes a method for measuring the concentration of potential. It has also been shown that the size of the regional economy depends on the distribution of potential in the region.
There are numerous diff erences between EU Member States, e.g. related to geographic location, language, culture, etc. The main difference can be primarily found in the level of development of individual regions and voivodeships in Europe. Poor regions and voivodeships in the conditions of growing competition lose their distance to the wealthy ones. The European Union, having this in mind, has given a priority in its regional policy to reduce the disparities between regions by providing aid through the socio-economic cohesion policy to neglected provinces. This problem is of a particular importance in the Polish context due to the large diff erences between the voivodeships. Large disproportions are visible especially between voivodeships of Eastern Poland whose potential, especially innovative potential, is among the weakest in Poland and in the EU. The aim of the article is to review the concepts of innovation, to present the innovative potential of particular Polish voivodeships in 2020 and to defi ne innovative potential’s signifi cance in the development. For the calculation of the synthetic index, there was used a non-model method.
Regional-level authorities are increasingly involved in designing their own strategies to support and enhance innovative local dynamics and improve the performance of their regional innovation systems. The aim of the paper is to assess the role of regional authorities’ policy in building innovation capacity of Pomorskie Voivodeship. As research methods, the author used descriptive analysis, analysis of strategic documents and data analysis. The results show that local government authorities of Pomorskie Voivodeship are active in supporting innovativeness of the region. Cluster policy and bottom- up process of defining smart specialisations may be assessed positively. However, a lack of separate governance structures of the regional innovation system, such as planning, organization, motivation and monitoring should be recognized as unfavourable. Finally, it is still necessary to concentrate measures on meeting needs necessary for an effective commercialization of innovative solutions.
In this paper, the analysis of carbon footprint values for children’s footwear was conducted. This group of products is characterized by similar small mass and diversity in the used materials. The carbon footprint is an environmental indicator, which is used to measure the total sets of greenhouse gas (GHG) emissions into the atmosphere caused by a product throughout its entire lifecycle. The complexity of carbon footprint calculation methodology is caused by multistage production process. The probability of emission greenhouse gases exists at each of these stages. Moreover, a large variety of footwear materials – both synthetic and natural, give the possibility of the emission of a lot of waste, sewage and gases, which can be dangerous to the environment. The diversity of materials could be the source of problems with the description of their origins, which make carbon footprint calculations difficult, especially in cases of complex supply chains. In this paper, with use of life cycle assessment, the carbon footprint was calculated for 4 children’s footwear types (one with an open upper and three with full uppers). The life cycles of the product were divided into 8 stages: raw materials extraction (stage 1), production of input materials (stage 2), footwear components manufacture (stage 3), footwear manufacture (stage 4), primary packaging manufacture (stage 5), footwear distribution to customers (stage 6), use phase (stage 7) and product’s end of life (stage 8). On these grounds, it was possible to point out the life cycle stages, where the optimization activities can be implemented in order to reduce greenhouse gases emissions. The obtained results showed that the most intensive corrective actions should be focused on the following stages: 3 (the higher emissivity), 4 and 8.
The research of development capabilities is a fundamental of strategic issues, which has to be taken into consideration by coal mines. This is particularly difficult in the current environment, which is determined by its crisis situation. In such conditions, it is necessary to take difficult decisions, and serious, strategic challenges into account, which allow for the crisis to be overcome, for the renewal and economic effectiveness of the operation of these coal mines, which have potential to grow, and closing the coal mines, which have not potential to grow. Due to the effects of such decisions, which concern not only coal mines but also the Silesian region, it is essential to prepare information to support them and promote rational choices. This is related to the issue of research for development possibilities. The article presents considerations related to the subject of research for development possibilities of coal mines in a crisis situation. Taking the results of literature study into account, the model of research process was developed, and identified the research issues concerning the following: - the identification of external factors which determine the possibility of development of the Polish mines and drawing a schedule of their changes in the future, - the identification of internal factors which determine the possibility of development of the Polish mines, - developing a way for the assessment of the development potential of the coal mines, to show appropriate strategic options and action programmes for these options, - determining possible strategic options and corresponding schedules, appropriate for the specific nature of the mines. The proposition of their solutions, which were obtained in the process of using the specific methods and research tools, allowed the guidelines in terms of research of development capabilities of coal mines to be presented.
In accordance with the principles of conducting revitalization activities specified in the Revitalization Act in force from 9 October 2015 and horizontal guidelines for revitalization in operational programs for 2014-2020, the preparatory phase of the revitalization process should include multi-layered analyzes concluded with deductions included in communal urban regeneration programs. The article describes the role of student architectural and urban competitions performed in cooperation between municipalities and universities as innovative analytical and conceptual activities that could form the basis for specifying recommendations in revitalization strategies planned by a given municipality. The infl uence of the student competitions’ results on the development of the city revitalization strategy is presented on grounds of periodic competitions organized at the Faculty of Architecture of the Gdańsk University of Technology in cooperation with the Department of Plans and Marketing of the City Hall of the City of Gdańsk.
The main objective of this study was to assess the environmental impact of the subsurface geological structure in Nam Son landfill by hydrogeophysical method. The Electrical Resistivity Tomography (ERT), Self- -Potential (SP) and Very Low Frequency (VLF) method was used for geological structure investigation. Three profiles (total 900 m long) of two-dimensional ERT, VLF density sections and 180 SP data points scattered within the study area near the disposal site were implemented. Surface water and groundwater samples were collected from 10 sites in the area for hydrochemical analysis. Interpretations of geophysical data show a low resistivity zone (<15 Ω m), which appears to be a fully saturated zone with leachate from an open dumpsite. There is a good correlation between the geophysical investigations and the results of hydrochemical analysis.
In this work studies of barrier height local values are presented. Distribution of the gate-oxide EBG(x, y) and semiconductor-oxide EBS(x, y) barrier height local values have been determined using the photoelectric measurement methods. Two methods were used to obtain the local values of the barrier heights: modified Powell-Berglund method and modified Fowler method. Both methods were modified in such a way as to allow determination of the EBG(x, y) and EBS(x, y) distribution over the gate area using a focused UV light beam of a small diameter d = 0.3 mm. Measurements have been made on a series of Al-SiO2-Si(n+) MOS structures with semitransparent (tAl = 35 nm) square aluminum gate (1 x 1 mm2). It has been found that the EBG(x, y) distribution has a characteristic dome-like shape, with highest values at the center of the gate, lower at the gate edges and still lower at gate corners. On the contrary, the EBS(x, y) distribution is of a random character. Also, in this paper, both barrier height measurements have been compared with the photoelectric effective contact potential difference fMS(x, y) measurements. These results show good agreement between distribution of the barrier heights EBG(x, y) and EBS(x, y) measurements and independently determined shape of the effective contact potential difference fMS(x, y) distribution.
Overseas mining investment generally faces considerable risk due to a variety of complex risk factors. Therefore, indexes are often based on conditions of uncertainty and cannot be fully quantified. Guided by set pair analysis (SPA) theory, this study constructs a risk evaluation index system based on an analysis of the risk factors of overseas mining investment and determines the weights of factors using entropy weighting methods. In addition, this study constructs an identity-discrepancycontrary risk assessment model based on the 5-element connection number. Both the certainty and uncertainty of the various risks are treated uniformly in this model and it is possible to mathematically describe and quantitatively express complex system decisions to evaluate projects. Overseas mining investment risk and its changing trends are synthetically evaluated by calculating the adjacent connection number and analyzing the set pair potential. Using an actual overseas mining investment project as an example, the risk of overseas mining investment can be separated into five categories according to the risk field, and then the evaluation model is quantified and specific risk assessment results are obtained. Compared to the field investigation, the practicability and effectiveness of the evaluation method are illustrated. This new model combines static and dynamic factors and qualitative and quantitative information, which improves the reliability and accuracy of risk evaluation. Furthermore, this evaluation method can also be applied to other similar evaluations and has a certain scalability.
In the early 21st century, the concepts and theories which constitute the theoretical and methodological foundation of the traditional 20th century resocialization pedagogy (divided into three basic groups characterized by different theoretical and methodological approaches) got largely outdated. Therefore, contemporary resocialization pedagogy searches for new inspirations. What can become one of the new theoretical- methodological concepts is creative resocialization. The presented study concerns the assumptions of both the traditional resocialization pedagogy and its new varieties, with special focus on traditional and current theoretical and methodological contexts.
The article is an invitation to discuss the way of understanding human development as an actualization of individual’s potential. I present two opposite approaches to this particular problem: human development as choosing preferable potentials and also as striving to actualization of, in some way, every potential, especially these which concern the uniqueness of an individual. In the following parts of the article I locate the problem of human potential in three main discourses regarding: 1) human nature and its origin, 2) the possibility of full experience of individual lifespan 3) the possibility of influence through people on the content and the form of their actualizing potential. To the latter and strictly practical issue I pay most attention. I formulate five thesis regarding this issue. They may, in my opinion, be a starting point to discuss the general problem mentioned above. Therefore, they encourage to think about the mechanism of human development and the future environment of his life.
Rockburst is a common engineering geological hazard. In order to evaluate rockburst liability in kimberlite at an underground diamond mine, a method combining generalized regression neural networks (GRNN) and fruit fly optimization algorithm (FOA) is employed. Based on two fundamental premises of rockburst occurrence, depth, σθ, σc, σt, B1, B2, SCF, Wet are determined as indicators of rockburst, which are also input vectors of GRNN model. 132 groups of data obtained from rockburst cases from all over the world are chosen as training samples to train the GRNN model; FOA is used to seek the optimal parameter σ that generates the most accurate GRNN model. The trained GRNN model is adopted to evaluate burst liability in kimberlite pipes. The same eight rockburst indicators are acquired from lab tests, mine site and FEM model as test sample features. Evaluation results made by GRNN can be confirmed by a rockburst case at this mine. GRNN do not require any prior knowledge about the nature of the relationship between the input and output variables and avoid analyzing the mechanism of rockburst, which has a bright prospect for engineering rockburst potential evaluation.
The work assessed the diversity of the natural potential in communes of Szczecin Metropolitan Area with particular emphasis on the areas of natural and valuable nature, protected area, forests and green areas. Established links between natural resources of municipalities and their valorisation using the SWOT analysis method (included in development strategies) and planned development goals. The basic method of use of the natural potential of the municipality are: to improve the quality of life of residents and tourism development. The impact of the natural potential on the quality of life is noticed primarily by urban centres, where a large share of green areas is noticed. The commune with a dominant share of protected areas (include Natura 2000) draws attention to the development of tourism based on natural potential. This is particularly evident in the communities that are characterized by a favourable location in relation to watercourses and reservoirs (freshwater and marine). However, in the socio-economic development, the natural potential is used in both these directions: to improve the quality of life and the development of tourism. In local strategic documents, it can be noticed that the transport system based on bicycle, pedestrian and water routes related to the natural potential can be eff ectively used in building cooperation between the central and other municipalities associated in Szczecin Metropolitan Area.
The Passhatten Member (Anisian–Ladinian) is the most westward exposure of the Middle Triassic sedimentary sequence of Spitsbergen. The member has an average organic carbon of 2.21 wt %. The sediments were deposited in a shallow shelf environment under conditions of high biological productivity stimulated by a well−developed upwelling system and an enhanced nutrient supply from land areas. The high biological productivity caused a high supply of organic particles to the shelf bottom. Decomposition of organic matter initiated oxygen deficiency in the bottom waters; however, bottom water dynamics on the shallow shelf temporarily replenished the oxygen. Consequently, the Passhatten Mb section is bioturbated, even in thick black shale horizons and consists of alternately spaced lithological layers with variable organic carbon content. The organic matter is dominated by type II kerogen with a mixture of strongly altered marine and/or land derived organic matter. Calculated initial hydrogen index values suggest oil−prone organic matter similar to kerogen I and II types. The organic matter is in the upper intermediate stage of thermo−catalytic alteration, close to the cata− and metagenetic boundary. Maturity indicators including Rock−Eval, Maximum Temperature, Organic Matter Transformation Ratio, Residual Carbon content, as well as the volume of methane generated suggest mature to overmature organic matter. Methane potential retained in the black shales sequence is significant. Unexpelled gas is estimated at 395 mcf/ac−ft for the examined section.
The aim of the paper is to evaluate the development of the Geoeducation Center in Kielce and to define ways and stage of creating its tourist brand. It is a new tourist attraction in the Świętokrzyskie region, which also plays role of informal education. Every year, this object is visited by approximately 40,000. tourists. Research has shown that the Geoeducation Center from the beginning of its operation consistently creates all the elements that make up the brand equity: awareness, perceived quality, associations and loyalty.
In this paper, the computer modelling application based on the modal expansion method is developed to study the influence of a sound source location on a steady-state response of coupled rooms. In the research, an eigenvalue problem is solved numerically for a room system consisting of two rectangular spaces connected to one another. A numerical procedure enables the computation of shape and frequency of eigenmodes, and allows one to predict the potential and kinetic energy densities in a steady-state. In the first stage, a frequency room response for several source positions is investigated, demonstrating large deformations of this response for strong and weak modal excitations. Next, a particular attention is given to studying how the changes in a source position influence the room response when a source frequency is tuned to a resonant frequency of a strongly localized mode.
High resolution body surface potential maps and an equivalent current dipole model of the cardiac generator were used to assess the heart state in two abnormal conditions: WPW syndrome with single accessory pathway and local ventricular ischemia. Results of a simulation study and experimental verification of the method for both cardiologic abnormalities are presented. Single accessory pathway in WPW syndrome was simulated as initial ventricular activation at the atrio-ventricular ring. Using a current dipole model of the cardiac generator, the locus of arrhythmogenic tissue was assessed with a mean error of 11 mm. Experimental localization of the accessory pathway in a WPW patient was in good agreement with the invasively obtained site. Local repolarization changes were simulated as shortening of the myocytes action potentials in three regions typical for stenosis of main coronary arteries. Using surface QRST integral maps and dipolar source model, small subendocardial and subepicardial lesions of myocardium were inversely located with a mean error of 9 mm and larger transmural lesions with a considerable mean error of 17 mm. Extent and prevalence of subepicardial or subendocardial type of the lesion were reflected in the dipole moment and orientation. In experimental verification of the method, in 7 of 8 patients that underwent PCI of a single vessel, estimated equivalent current dipole position matched well the treated vessel. The results suggest that diagnostic interpretation of body surface potential maps based on dipolar source model could be a useful tool to assess local pathological changes in the heart.
Purpose: to demonstrate the possibility of finding features reliable for more precise distinguishing between normal and abnormal Pattern Electroretinogram (PERG) recordings, in Continuous Wavelet Transform (CWT) coefficients domain. To determine characteristic features of the PERG and Pattern Visual Evoked Potential (PVEP) waveforms important in the task of precise classification and assessment of these recordings. Material and methods: 60 normal PERG waveforms and 60 PVEPs as well as 47 PERGs and 27 PVEPs obtained in some retinal and optic nerve diseases were studied in the two age groups (<= 50 years, > 50 years). All these signals were recorded in accordance with the guidelines of ISCEV in the Laboratory of Electrophysiology of the Retina and Visual Pathway and Static Perimetry, at the Department and Clinic of Ophthalmology of the Pomeranian Medical University. Continuous Wavelet Transform (CWT) was used for the time-frequency analysis and modelling of the PERG signal. Discriminant analysis and logistic regression were performed in statistical analysis of the PERG and PVEP signals. Obtained mathematical models were optimized using Fisher F(n1; n2) test. For preliminary evaluation of the obtained classification methods and algorithms in clinical practice, 22 PERGs and 55 PVEPs were chosen with respect to especially difficult discrimination problems (borderline recordings). Results: comparison between the method using CWT and standard time-domain based analysis showed that determining the maxima and minima of the PERG waves was achieved with better accuracy. This improvement was especially evident in waveforms with unclear peaks as well as in noisy signals. Predictive, quantitative models for PERGs and PVEPs binary classification were obtained based on characteristic features of the waveform morphology. Simple calculations algorithms for clinical applications were elaborated. They proved effective in distinguishing between normal and abnormal recordings. Conclusions: CWT based method is efficient in more precise assessment of the latencies of the PERG waveforms, improving separation between normal and abnormal waveforms. Filtering of the PERG signal may be optimized based on the results of the CWT analysis. Classification of the PERG and PVEP waveforms based on statistical methods is useful in preliminary interpretation of the recordings as well as in supporting more accurate assessment of clinical data.
To investigate the impact of various Al-Ti-B grain-refiners on solidification and grain-refining performance, a wrought aluminium alloy AA6182 was used. Three different grain-refiners from different manufacturers were used to establish the efficiency, i.e. contact time before casting, on the primary solidification and grain formation size. The primary solidification of α-Al grains at inoculation was observed by using thermal analysis (TA). Differential scanning calorimetry (DSC) was used in order to analyze the quality of various grain-refiners. The size of the primary grains was analyzed using optical microscopy (OM). Scanning electron microscopy (SEM) was used to estimate the size and distribution of Al3Ti and TiB2 particles in various grain-refiners and to establish the best efficiency of the investigated grain-refiners. Within 1-4 min of inoculation the smallest fine equiaxed grains were achieved when either one of the investigated grain-refiners was added. It was established, that grain-refiner A contains higher content of impurities which do not melt in the experimental temperature range made by DSC method. The most pure grain-refiner turned out to be grain-refiner B, in which the most optimal number of TiB2 particles and particle size distribution was found.