Search results

Filters

  • Journals
  • Authors
  • Keywords
  • Date
  • Type

Search results

Number of results: 8
items per page: 25 50 75
Sort by:

Abstract

A plenum window with incorporation of Helmholtz resonators in between two glass panes was tested in a reverberation room. The effects of jagged flap on reducing strength of diffracted sound was also investigated in the present studies where white, traffic and construction noises were examined during each set of experiment. When the noise source was located at the central line of the plenum window, the plenum window with Helmholtz resonators was able to mitigate 8.5 dBA, 8.9 dBA and 8.2 dBA of white, traffic and construction noises, respectively, compared with the case of without window. These amounts of noises that attenuated by the plenum window were slightly higher than the case where noise source was diverged 30º away from the plenum window. The effects of jagged flaps on the acoustical performance of the plenum window were negligible. The Helmholtz resonators had the best performance in the frequency region between 900 Hz to 1300 Hz where in this frequency range, the plenum window with Helmholtz resonators was able to attenuate additional 1.7 dBA, 1.9 dBA and 1.6 dBA of white, traffic and construction noises, respectively, compared with the case of without resonators.
Go to article

Abstract

This paper presents a novel complementary CPWfed slotted microstrip patch antenna for operation at 2.4 GHz, 5.2 GHz and 6.3 GHz frequencies. The primary structure consists of the complementary split ring resonator slots on a patch and the design is fabricated on FR-4 epoxy substrate with substrate thickness of 1.6 mm. The described structure lacks the presence of a ground plane and makes use of a number of circular complementary SRRs along with rectangular slots on the radiating patch. The structure provides a wide bandwidth of around 390 MHz, 470 MHz and 600 MHz at the three bands with return losses of -11.5 dB, -24.3996dB and -24.4226 dB, respectively. The inclusion of the rectangular slots in the CSRR based slot antenna with stairecase structure improved the performance with respect to return loss.
Go to article

Abstract

The aim of this publication is to design a procedure for the synthesis of an IDT (interdigital transducer) with diluted electrodes. The paper deals with the surface acoustic waves (SAW) and the theory of synthesis of the asymmetrical delay line with the interdigital transducer with diluted electrodes. The authors developed a theory, design, and implementation of the proposed design. They also measured signals. The authors analysed acoustoelectronic components with SAW: PLF 13, PLR 40, delay line with PAV 44 PLO. The presented applications have a potential practical use.
Go to article

Abstract

The locally resonant sonic material (LRSM) is an artificial metamaterial that can block underwater sound. The low-frequency insulation performance of LRSM can be enhanced by coupling local resonance and Bragg scattering effects. However, such method is hard to be experimentally proven as the best optimizing method. Hence, this paper proposes a statistical optimization method, which first finds a group of optimal solutions of an object function by utilizing genetic algorithm multiple times, and then analyzes the distribution of the fitness and the Euclidean distance of the obtained solutions, in order to verify whether the result is the global optimum. By using this method, we obtain the global optimal solution of the low-frequency insulation of LRSM. By varying parameters of the optimum, it can be found that the optimized insulation performance of the LRSM is contributed by the coupling of local resonance with Bragg scattering effect, as well as a distinct impedance mismatch between the matrix of LRSM and the surrounding water. This indicates coupling different effects with impedance mismatches is the best method to enhance the low-frequency insulation performance of LRSM.
Go to article

Abstract

In order to improve the efficiency and ensure the security of power supply used in a mine, this paper mainly studies the quasi-resonant flyback secondary power supply and analyzes its operational principles based on the requirements of soft-switching technology. In accordance with the maximum energy of a short-circuit and the request of maximum output voltage ripple, this paper calculates the spectrum value of the output filter capacitor and provides its design and procedures to determine the parameters of the main circuit of power supply. The correctness and availability of this theory are eventually validated by experiments.
Go to article

Abstract

B a c k g ro u n d: Arterial hypertension (HTN) ranks among the most widespread chronic illnesses that affect adults in industrialized societies. The main goal of this study was to describe the control (inhibition) processes among HTN patients, and to evaluate the dynamics of brain activity while the patients were engaged in tasks measuring the cognitive aspect of self-control. P a r t i c i p a n t s a n d p ro c e d u re: A set of neuropsychological tests (California Verbal Learning Test, Color Trails Test, The Trail Making Test, Controlled Oral Word Association Test), and a fMRI Stroop test (rapid event design) were administered to 40 persons (20 HTN patients and 20 controls). Groups were matched in terms of age, sex, education, smoking history, and waist-to-hip ratio. R e s u l t s: As revealed by fMRI, the HTN patients demonstrate left-hemisphere asymmetry in inhibitory processes. Also around 90% of patients had problems when completing tasks which rely on verbal and graphomotor aspects of self-control. C o n c l u s i o n s: The results suggest that both cerebral hemispheres must interact correctly in order to provide successful executive control. The deficiencies in control and executive functioning, which were observed among the patients, prove that HTN negatively affects brain processes that control one’s cognitive activity.
Go to article

Abstract

Excitation of the entropy mode in the field of intense sound, that is, acoustic heating, is theoretically considered in this work. The dynamic equation for an excess density which specifies the entropy mode, has been obtained by means of the method of projections. It takes the form of the diffusion equation with an acoustic driving force which is quadratically nonlinear in the leading order. The diffusion coefficient is proportional to the thermal conduction, and the acoustic force is proportional to the total attenuation. Theoretical description of instantaneous heating allows to take into account aperiodic and impulsive sounds. Acoustic heating in a half-space and in a planar resonator is discussed. The aim of this study is to evaluate acoustic heating and determine the contribution of thermal conduction and mechanical viscosity in different boundary problems. The conclusions are drawn for the Dirichlet and Neumann boundary conditions. The instantaneous dynamic equation for variations in temperature, which specifies the entropy mode, is solved analytically for some types of acoustic exciters. The results show variation in temperature as a function of time and distance from the boundary for different boundary conditions.
Go to article

Abstract

A detailed study about the suitable perturbation element shape and location for tunable BW dual mode microstrip filter which has circular ring resonator is presented. BW tuning is achieved by resonator geometry modification. The study explains the effect of a perturbation element on the stability of the center frequency during BW tuning. Different cases have been studied for two shapes of perturbation element; which one is a rectangular and the other is a radial. The treated cases discuss whether the perturbation element is located in the inner or in the outer circumference of the ring, and whether it is a patch or a notch. BW tuning simulation treated the case of FBW3dB increase for two and three times. The best case of perturbation element which has the best center frequency stability has been modeled, simulated, and fabricated at 2.4 GHz. Geometry modification of the filter took into account the RF MEMS modeling. The filter has an elliptic frequency response, and its FBW has been increased in five steps from 1.7% to 5%. The designed filters were evaluated experimentally and by simulation with very good agreement.
Go to article

This page uses 'cookies'. Learn more