An analysis of seismic shocks from the Heer Land and the Nordaustlandet was made (shocks recorded by the Hornsund seismological station). Kinematic models and synthetic seismograms were constructed. A system of horizontal discontinuities located in the upper mantle was assumed. A good agreement between observational data from the seismograms and theoretical results was obtained.
Since the 1970s, the Legnica-Głogów Copper District has an area of intensive mining of copper. Mining activities resulted in the appearance of induced seismic activity. This situation caused the necessity of setting an underground seismological network. In the mid-1990s, due to the great damage of objects on the surface caused by the ground vibrations due to mining tremors, a surface strong motion seismic network equipped with accelerometers was created. They monitor the vibration levels of both the land and the buildings themselves. This contributed to a better knowledge of the nature of ground vibration and the resistance of objects. In recent years, anthropogenic threats, which include seismicity induced by mining activities, are arousing more and more interest. To be able to develop test methods for seismic source physics, the analysis of the impact of vibrations on the surface and the seismic hazard, network measurement should also be developed and modernized. In the years 2014–2015, the IS-EPOS “Digital research space of induced seismicity for EPOS purposes” project, extended the LUMINEOS modern seismological network presently consisting of 15 seismometers and 10 accelerometers, with the possibility of additional further expansion. The data obtained from the LUMINEOS network complements the existing underground mining network and surface strong motion network. This allows for an advanced seismic analysis.
The paper informs about a foundation of seismic observatory at Arctowski's Station in the beginning og 1978. Descriptions of the object and of registration seismic instruments are included. Conditions of registration and parameters of instruments are noted. Registration sequence of seismic tremors from March 1978 to October 1979 is described. A preliminary statistics of tremors is also announced.
In the Carboniferous rock mass of the Upper Silesian Coal Basin, large changes in the geomechanical conditions often occur over relatively short distances. These conditions relate to rock properties that are primarily responsible for the occurrence of geodynamic phenomena in the rock mass. The main factor influencing the manifestation of these phenomena is tectonic stress developed during Variscan and subsequent Alpine orogenesis. This stress contributed to creating tectonic structures in the Carboniferous formations and influenced the properties of the rocks themselves and the rock mass they form. As a result of the action of the stresses, compaction zones (main stresses were compressive) were formed, along with zones in which one of the main stresses was tensile. For the compaction zones in the Carboniferous rocks, the following geomechanical parameters have been calculated: uniaxial compressive strength, Young’s modulus and post-critical modulus. The local stress field was determined according to the focal mechanism in selected areas (Main and Bytom troughs) to characterize changes in geomechanical properties of the rocks that are responsible for high-energy tremors (E ≥ 106 J, ML ≥ 2.2).
The distribution of earthquake foci around the Hornsund fiord, south Spitsbergen, suggest the presence in this region of a micronode of geotectonic structures, exhibiting moderate dynamic activity. Dislocation description was applied to the processes of motion of the glacier and crack formation. Long-period seismic waves generated by the glacier-substratum dynamic system and impulses generates by icebergs seated on the sea bottom have been discussed.
Four Geodynamical Expeditions of the Polish Academy of Sciences carried through wide research seismic program in West Antarctica in 1979-1991. Three of these expeditions operated in the Bransfield Strait. The experiment of deep refraction and wide-angle reflection in West Antarctica focused on deep structure of the lithosphere, mainly of the Earth's crust. The network of deep seismic soundings (DSS) profiles covered all the Bransfield Strait. Five land stations on the South Shetland Islands, three stations on the Antarctic Peninsula and nine ocean bottom seismographs (OBS) recorded seismic waves, generated by explosions in a sea. The Bransfield Rift and the Bransfield Platform form a marginal basin against a volcanic arc of the South Shetland Islands. The paper presents new results of 2-D seismic modeling for network of five selected profiles. Four of them, ranging in lenght from 150 to 190 km, crossed main structures of the Bransfield Strait and the fifth, which connected the other ones and was 310 km long, ran along the Bransfield Rift. Two or three seismic models were presented for each profile. Finally, mutually corrected and controlled 2-D models of described profiles were constructed. They all presented spatial complex structure of the Earth's crust in a young rift of the Bransfield Strait, including extent of its main element i.e. anomalous high velocity body (HVB) (Vp > 7.4 km/s), detected in 10-30 km depth range except profile DSS-4 (southwest part of the Bransfield Strait). This inhomogeneity is interpreted as intrusion of the upper mantle (?asthenosphere) during stretching of the continental crust. The Moho discontinuity was found at depth 30-35 km, with velocities equal to about 8.1 km/s.
The underground mining of coal deposits in the Upper Silesian Coal Basin (GZW) re-sults in an imbalance in the distribution of the stress in the rock mass, both in the immediate and distant surroundings of mining excavations. The occurrence of seismic tremors, among others, is the consequence of this process,. The intensities of seismic phenomena, which occur in several regions of the GZW (Bytomian Basin, Main Saddle, Main Basin, Kazimierzowska Basin, and the Jejkowice Basin) are very diverse, ranging from tremors unrecognizable by humans to strong tremors of the nature of weak earthquakes (Patyńska and Stec 2017). During the period of 15 years, i.e. from 2001 to 2015, the level of seismic activity changed and de-pended on both the intensity of the excavation work and the variability of the lithological and tectonic structures. On the other hand, the seismic activity analysis has shown that in recent years, despite a decrease in total output, seismic activity and rockburst hazard have increased. One of the rea-sons was the increase in mining output. Almost half of the output came from coal seams under the rockburst hazard. This resulted in an increase in the number of great energy tremors with the energy of 107, 108 and 109 J. It has been shown that the amount of energy tremors has a high impact on the level of the rockburst hazard. Between 2001 and 2015, as many as 20 rockburst were caused by seismic tremors above 107 J with 42 total phenomena (Patyńska 2002–2016). The purpose of characterizing the causes of this phenomenon was determined by the parameters characterizing the structure of the rock mass in places where the rockburst was recorded.
The current rockburst hazard conditions in the copper mines are the consequence of mining-induced seismicity of the rock strata whilst the majority of registered rockbursts have been caused by high-energy seismic events. T he analysis of seismic activity in recent years indicates that the region of the Rudna mine is the region of the highest seismic activity. This paper is an attempt at evaluating the seismicity levels in the Rudna mine in the period from 2006-2015, within the entire mine and in its particular sections. Key parameters of seismic activity include the number of registered seismic events, total energy emission levels, and a unit energy factor. The variability of Gutenberg -Richter (GR) parameters are analyzed and the epicenters’ locations are investigated with respect to the stope position. T he distinction is made between low-energy (103 ≤ As < 105 J) and high-energy (As ≥ 105J) seismic events ahead of the stope, in the opening-up cross-throughs and in the gob areas. It appears that the risk level of a high-energy event occurrence in the R udna mine has not changed in recent years and has remained on a high level whilst the differences in seismic activity, in particular mine sections, are attributed to the varied extraction height and varied thickness of rockburst-prone carbonate layers in the roof of the copper ore deposit. The analysis of the epicenters’ locations with respect to the stope reveals that no matter what the seismic energy levels, the largest number of rockbursts are registered in the opening-up cross-through zone. Low-energy tremors are mostly located in the gob areas, high-energy events occur mostly ahead of the stope. T hus, the evaluation of the seismicity conditions in the Rudna mine seems to positively verify the relationship between the number of registered events and the levels of generated seismic energy, taking the local geological and mining conditions and the specificity of the room and pillar mining method into account.
During four Polish Geodynamical Expeditions to West Antarctica between 1979 and 1991, seismic measurements were made along 21 deep refraction profiles in the Bransfield Strait and along the coastal area of Antarctic Peninsula using explosion sources. Recordings were made by 16 land stations and 8 ocean bottom seismometers. Good quality recordings were obtained up to about 250 km distance. This allowed a detailed study of the seismic wave field and crustal structure. Three-dimensional tomographic inversion was carried out using first arrivals from the complete data set including off-line recordings. As a result, we obtained a 3-D model of the P-wave velocity distribution in the study area. In the area adjacent to the Antarctic Peninsula coast, sedimentary cover of 0.2 to 3 km thickness was found, whereas in the shelf area and in the Bransfield Strait sedimentary basins with thickness from 5 to 8 km were observed. In the Bransfield Strait a high velocity body with Vp > 7.5 km/s was found at 12 km depth. The use of the off-line data allowed for determination of the horizontal extent of the body. The thickness of the crust varies from more than 35-40 km in the coastal area south of the Hero Fracture Zone to 30-35 km in the area of Bransfield Strait and South Shetland Islands and about 12 km in the Pacific Ocean NW of South Shetland Islands.
Deep seismic sounding measurements were performed in the continent-ocean transition zone of north-western Spitsbergen , during the expedition ARKTIS XV/2 of the RV Polarstern and the Polish ship Eltanin in 1999. Profile AWI-99200 is 430 km long and runs from the Molloy Deep in the Northern Atlantic to Nordaustlandet in north-eastern Svalbard . Profile AWI-99400 is 360 km long and runs from the Hovgĺrd Ridge to Billefjorden. Seismic energy (airgun and TNT shots) was recorded by land (onshore) seismic stations (REF) and ocean bottom seismometers (OBS) and hydrophone systems (OBH). Good quality refracted and reflected P waves were recorded along the two profiles providing an excellent data base for a detailed seismic modelling along the profile tracks. Clear seismic records from airgun shots were obtained up to distances of 200 km at land stations and 50 km at OBSs. TNT explosions were recorded even up to distances of 300 km . A minimum depth of about 6 km of the Moho discontinuity was found east of the Molloy Deep. Here, the upper mantle exhibits P-wave velocity of about 7.9 km/s, and the crustal thickness does not exceed 4 km . The continent–ocean transition zone to the east is characterised by a complex seismic structure. The zone is covered by deep sedimentary basins. The Moho interface dips down to 28 km beneath the continental part of the 99200 profile, and down to 32 km beneath the 99400 profile. The P-wave velocity below the Moho increases up to 8.15 km/s. The continental crust consists of two or three crystalline layers. There is a lowermost crustal continental layer, in the 99400 profile’s model, with the P-wave velocity in order of 7 km/s, which does not exist in the continental crust along the 99200 profile. Additionally, along the 99200 profile, we have found two reflectors in the lower lithosphere at depths of 14–42 and 40–50 km dipping eastward, with P-wave velocity contrasts of about 0.2 km/s. The characteristics of the region bears a shear-rift tectonic setting. The continent–ocean transition zone along the 99200 profile is mostly dominated by extension, so the last stage of the development of the margin can be classified as rifting. The uplifted Moho boundary close to the Molloy Deep can be interpreted as a south-western end of the Molloy Ridge. The margin in the 99400 profile area is of transform character.
During the Polish Antarctic Geodynamic Expeditions, 1979-91, a wide geophysical and geological programme was performed in the transition zone between the Drake and South Shetland microplates and the Antarctic Plate, in West Antarctica. In the Bransfield Strait area, and along passive continental margin of the Antarctic Peninsula, 20 deep seismic sounding profiles were made. The interpretation yielded two - dimensional models of the crust and lithosphere down to 80 km depth. In the coastal area between the Palmer Archipelago and the Adelaide Island, the Earth's crust has a typical continental structure. Its thickness varies from 36 to 42 km in the coastal area, decreasing to about 25-28 km toward Pacific Ocean. In the surrounding of Bransfield Strait, the Moho boundary depth ranges from 10 km beneath the South Shetland Trench to 40 km beneath Antarctic Peninsula. The crustal structure beneath the Bransfield Strait trough is highly anomalous. Presence of a high-velocity body, with longitudinal seismic wave velocities Vp > 7,0 km/s, was detected there in the 6-32 km depth range. This inhomogeneity was interpreted as an intrusion, coinciding with the Deception-Bridgeman volcanic line. In the transition zone from the Drake Passage to the South Shetland Islands, a seismic boundary in the lower lithosphere occurs at a depth ranging from 35 to 80 km. The dip of both the Moho and this boundary is approximately 25° towards the southeast, indicating the direction of subduction of the Drake Plate lithosphere under the Antarctic Plate. Basing on the results of four Polish Geodynamic Expeditions, the map of crustal thickness in West Antarctica is presented.
In the framework of the 4th International Polar Year Panel “Plate Tectonics and Polar Gateways” the international project “The Dynamic Continental Margin Between the Mid-Atlantic-Ridge System (Mohns Ridge, Knipovich Ridge) and the Bear Island Region” was undertaken in 2007-2008. As a part of this project a new three-component seismic broadband station was installed in September 2007 in the area of the Polish Polar Station Hornsund in Southern Spitsbergen . The new HSPB station has the coordinates: Φ = 77.0019°N, λ = 15.5332°E, H = 11 m a.s.l. During the first years of operation a number of good quality teleseismic events were recorded. This gives the opportunity for a first determination of crustal and mantle structure beneath the station by using receiver function (RF) and SKS splitting techniques. The Moho depth determined using RF is about 32 km beneath HSPB. Significant amplitudes on the transverse components of the RF indicate a shallowly dipping discontinuity (sedimentary-basement) towards the south-west. The fast polarization of SKS phases is near parallel to the border between the continental and the oceanic crust and the Hornsund fault (α = 151.8°). The average time delay dt between “fast” and “slow” directions is 0.68 s, which implies ca. 2% anisotropy in a 100- 200 km thick layer in the mantle.
The lithospheric transect South Shetland Islands (SSI) — Antarctic Peninsula (AP) includes: the Shetland Trench (subductional) and the adjacent portion of the SE Pacific oceanic crust; the South Shetland Microplate (younger magmatic arc superimposed on continental crust); the Bransfield Rift and Platform (younger back-arc basin); the Trinity Horst (older magmatic arc superimposed on continental crust); the Gustav Rift (Late Cenozoic) and James Ross Platform (older back-arc basin). Deep seismic sounding allowed to trace the Moho discontinuity at about 30 km under South Shetlands and at 38—42 km in the northern part of Antarctic Peninsula (Trinity Horst), under typical continental crust. Modified crust was recognized under Bransfield Strait. Geological interpretation based on deep seismic refraction and multichannel reflection soundings, and surface geological data, is presented.
During the Polish Antarctic Geodynamical Expeditions in 1979-91, deep seismic sounding measurements were performed in the transition zone between the Drake and South Shetland Microplates and the Antarctic Plate in West Antarctica. For the Bransfield Strait area, the seismic records of five land stations in South Shetland Islands and two stations at the Antarctic Peninsula were used. The interpretation yielded two—dimensional models of the crust and lithosphere down to 80 km depth. In the uppermost crust, the unconsolidated and poorly consolidated young sediments with velocities of 1.9 — 2.9 km/s cover the layers 4.0—4.2 and 5.6—5.9 km/s. The crustal structure beneath the trough of Bransfield Strait is highly anomalous. The presence of a high velocity body, with longitudinal seismic wave velocities vp > 7.0 km/s, was detected in the 6 — 30 km depth range. This inhomogeneity was interpreted as an intrusion, coinciding with the Deception—Bridgeman volcanic line. For the uppermost crust, a qualitative comparison was made between the results from the reflection profiles (GUN) and deep seismic sounding profiles (DSS). In the study area, the Moho boundary depth ranges from 10 km beneath the South Shetland Trench to 40 km under the Antarctic Peninsula. In the transition zone from the Drake Passage to the South Shetland Islands, a seismic boundary in the lower lithosphere occurs at a depth ranging from 35 to 80 km. The dip of both the Moho and this boundary is approximately 25°, and indicates the direction of subduction of the Drake Plate lithosphere under the Antarctic Plate. The results obtained were compared with earlier results of seismic, gravity and magnetic surveys in West Antarctica. A scheme of geotectonic division and a geodynamical model of the zone of subduction of the Drake Plate under the Antarctic Plate is compared with subduction zones in other areas of the circum-Pacific belt.
The major downside of blasting works is blast vibrations. Extensive research has been done on the subject and many predictors, estimating Peak Particle Velocity (PPV), were published till date. However, they are either site specific or global (unified model regardless of geology) and can give more of a guideline than exact data to use. Moreover, the model itself among other factors highly depends on positioning of vibration monitoring instruments. When fitting of experimental data with best fit curve and 95% confidence line, the equation is valid only for the scaled distance (SD) range used for fitting. Extrapolation outside of this range gives erroneous results. Therefore, using the specific prediction model, to predetermine optimal positioning of vibration monitoring instruments has been verified to be crucial. The results show that vibration monitoring instruments positioned at a predetermined distance from the source of the blast give more reliable data for further calculations than those positioned outside of a calculated range. This paper gives recommendation for vibration monitoring instruments positioning during test blast on any new site, to optimize charge weight per delay for future blasting works without increasing possibility of damaging surrounding structures.