Validation results of a theoretical model that describes the formation of bromate during ozonation of bromide-containing natural waters are presented. An axial dispersion model integrating the nonideal mixing, mass-transfer and a kinetic model that links ozone decomposition reactions from the Tomiyasu, Fukutomi and Gordon ozone decay model with direct and indirect bromide oxidation reactions, oxidation of natural organicmatter and reactions of dissolved organics and aqueous bromine was verified. Themodel was successfully validated with results obtained both at a laboratory and a full scale. Its applicability to different water supply systems was approved.
Simplifications used in simulation program codes require the use of substitute parameters in the material databases (also called apparent or substitutive). On the one hand, they formally fit into the records used in the heat flow model, porosity, properties etc. and on the other hand they should be determined in conditions most similar to the real casting-mould system. The article presents results of a research on thermophysical parameters of gypsum mould used for precision casting moulds. Experiments were carried out on a cylindrical mould made of Plasticast gypsum, in which the heat source was a cylinder filled with liquid aluminium alloy of the temperature of 655°C. Energetic validation was carried out by using the NovaFlow&Solid ver. 6.3 simulation code. As a result of validation tests, substitute thermophysical parameters of gypsum were determined. For determined parameters, best-fit of solidification time from the experiment and simulation was obtained and the curves of gypsum mass heating were satisfactorily recreate.
This article presents the validation process of a brake FE model by means of temperature measured on a special stand using infrared technology. Unlike many other publications, the authors try to show the interaction between measurement technology and numerical modeling rather than only nice, perfectly correlated graphs. Some difficulties in choosing and using validation parameters are also pointed out and discussed. Finally, results of FE analyses are compared with measured data, followed by explanation of applied numerical technology and estimation of validation process effectiveness.
This article describes the validation of a supercritical steam cycle. The cycle model was created with the commercial program GateCycle and validated using in-house code of the Institute of Power Engineering and Turbomachinery. The Institute's in-house code has been used extensively for industrial power plants calculations with good results. In the first step of the validation process, assumptions were made about the live steam temperature and pressure, net power, characteristic quantities for high- and low-pressure regenerative heat exchangers and pressure losses in heat exchangers. These assumptions were then used to develop a steam cycle model in Gate-Cycle and a model based on the code developed in-house at the Institute of Power Engineering and Turbomachinery. Properties, such as thermodynamic parameters at characteristic points of the steam cycle, net power values and efficiencies, heat provided to the steam cycle and heat taken from the steam cycle, were compared. The last step of the analysis was calculation of relative errors of compared values. The method used for relative error calculations is presented in the paper. The assigned relative errors are very slight, generally not exceeding 0.1%. Based on our analysis, it can be concluded that using the GateCycle software for calculations of supercritical power plants is possible.
This article asks the question to what extent Ryszard Nycz’s ambitious project of cultural practice outlined in his book Culture as Verb succeeds in opening up ‘a new form of knowledge’ and thus equipping the humanities with a fresh validity. Nycz takes up the poststructuralist concept of the humanities as a site of alternative or subversive knowledge, founded on the principles of interpretation and textual dispersion, and refocuses it on involvement (participation) and binary oppositions (borders), i.e. human vs. nonhuman, or nature vs. culture as a construct. The article, rather than addressing the issues of involvement and borders (liminality), concentrates instead on the contradictions that Nycz’ s theory gives rise to when applied to history, time and the emergence of subjectivity (identity). There is nothing objectionable about the proposition that temporal change is at the very core of culture, yet its locus must be sought not in the proclamations of individual agents, but in the conceptual ruptures that expose and reveal the boundaries of (collective) consciousness and unconsciousness, i.e. the operation of contingency.
A cross-flow, tube and fin heat exchanger of the water – air type is the subject of the analysis. The analysis had experimental and computational form and was aimed for evaluation of radiative heat transfer impact on the heat exchanger performance. The main element of the test facility was an enlarged recurrent segment of the heat exchanger under consideration. The main results of measurements are heat transfer rates, as well as temperature distributions on the surface of the first fin obtained by using the infrared camera. The experimental results have been next compared to computational ones coming from a numerical model of the test station. The model has been elaborated using computational fluid dynamics software. The computations have been accomplished for two cases: without radiative heat transfer and taking this phenomenon into account. Evaluation of the radiative heat transfer impact in considered system has been done by comparing all the received results.
The paper presents the results of experimental-simulation tests of expansion-shrinkage phenomena occurring in cast iron castings. The tests were based on the standard test for inspecting the tendency of steel-carbon alloys to create compacted discontinuities of the pipe shrinkage type. The cast alloy was a high-silicone ductile iron of GJS - 600 - 10 grade. The validation regarding correctness of prognoses of the shrinkage defects was applied mostly to the simulation code (system) NovaFlow & Solid CV (NFS CV). The obtained results were referred to the results obtained using the Procast system (macro- and micromodel). The analysis of sensitivity of the modules responsible for predicting the shrinkage discontinuities on selected pre-processing parameters was performed, focusing mostly on critical fractions concerning the feeding flows (mass and capillary) and variation of initial temperature of the alloy in the mould and heat transfer coefficient (HTC) on the casting - chill interface.
The main objective of this study was to analyse the psychometric properties of the Polish adaptation of the Kenny Music Performance Anxiety Inventory – Revised (K -MPAI -R, Kenny, 2009) modified as the Kenny Performance Anxiety Inventory (K -PAI) for a general population of individuals with experience in public performance in fields other than music. Another aim was to test the factor structure of K -PAI on a Polish sample. We analysed the relationship between the scores on K -PAI and general anxiety, depression, attentional control, the scores on the Behavioural Inhibition Scale (BIS) and the Behavioural Activation Scale (BAS) and reward susceptibility. Participants (N = 586) completed the questionnaires in a wider online study. The scores on K -PAI revealed a moderate to strong positive association with different measures of anxiety, trait -anxiety in particular, and negative associations with attentional control and susceptibility to reward. K -PAI scores were strongly associated with depression, but displayed no relationship with the BAS or any of its sub -dimensions. These results generally replicated those obtained on the K -MPAI -R with Australian and Peruvian musicians, indicating the cross -cultural validity of the K -MPAI -R and K -PAI. It is suggested that performance anxiety develops on the basis of the biological predispositions and early negative experiences in performance contexts.
The presented paper describes the results of an experiment determining the instantaneous values of velocity vector components of the air stream at selected spots of the boundary layer formed at the sidewalls of the mine heading in the ŁP type steel arch support. The experiment was carried out in a mine heading in an active hard coal mine. A 3-axis thermoanemometric probe was used to obtain three-dimensional distributions of the velocity and turbulent values, such as turbulence intensity and turbulent kinetic energy of the flowing ventilation air stream. The analysis of the measurement results was aided by a numerical solution of the discussed case of flow. The research results presented in this paper provide a basis for extensive studies of the description of velocity distribution and other turbulent quantities within the near-sidewall structures of a mine heading. The objective of these tasks is to improve the accuracy and reliability of numerical calculations relating to air flow in mine headings.
In the flexible road pavement design a mechanistic model of a multilayered half-space with linear elastic or viscoelastic layers is usually used for the pavement analysis. This paper describes a domain selection for the purpose of a FE model creating of the linear elastic layered half-space and boundary conditions on borders of that domain. This FE model should guarantee that the key components of displacements, stresses and strains obtained using ABAQUS program would be in particular identical with those ones obtained by analytical method using VEROAD program. It to achieve matching results with both methods is relatively easy for stresses and strains. However, for displacements, using FEM to obtain correct results is (understandably) highly problematic due to infinity of half-space. This paper proposes an original method of overcoming these difficulties.
The paper refers to previous publications of the author, focused on criteria of casting feeding, including the thermal criterion proposed by Niyama. On the basis of this criterion, present in the post-processing of practically all the simulation codes, danger of casting compactness (in the sense of soundness) in form of a microporosity, caused by the shrinkage phenomena, is predicted. The vast majority of publications in this field concerns shrinkage and feeding phenomena in the cast steel castings – these are the alloys, in which parallel expansion phenomenon does not occur as in the cast irons (graphite crystallization). The paper, basing on the simulation-experimental studies, presents problems of usability of a classic, definition-based approach to the Niyama criterion for the cast iron castings, especially of greater massiveness, for prediction of presence of zones of dispersed porosity, with relation to predictions of the shrinkage type defects. The graphite expansion and its influence on shrinkage compensation during solidification of eutectic is also discussed.
Agility is a concept and practice with significant importance in managing and leading added value in products, services, projects, and organizations, although it’s usage can also be very risky due to its degree of fuzziness, if not properly understood and defined. This research re-defines agility, emphasizes the need for ontologies for its management and leadership applications and uses a new type of fuzzy logic-based software to measure the degree of agility inside a technology company. In our agility research, various definitions of agility were first gathered and presented for the creation of an agility ontology through a mind map, revealing the main characteristics of agility. Then as part of the Co-Evolute theory and methodology, the first agility ontology was developed as well as the first software application that evaluates the degree of agility in an organization. The application includes statements on which the respondents give opinions in their situation concerning the current and future desired states of agility and its importance in an evaluative way. Today the application has been fully tested in the real world and we have obtained the first test results. The positive verification and validation of the method are shown in this article.
The paper presents the results of experimental validation of a set of innovative software services supporting processes of achieving, assessing and maintaining conformance with standards and regulations. The study involved several hospitals implementing the Accreditation Standard promoted by the Polish Ministry of Health. First we introduce NOR-STA services that implement the TRUST-IT methodology of argument management. Then we describe and justify a set of metrics aiming at assessment of the effectiveness and efficiency of the services. Next we present values of the metrics that were built from the data collected. The paper concludes with giving the interpretation and discussing the results of the measurements with respect to the objectives of the validation experiment.
The paper concerns the problem of discontinuity in high pressure die castings (HPDC). The compactness of their structure is not perfect, as it is sometimes believed. The discontinuities present in these castings are the porosity as follow: shrinkage and gas (hydrogen and gas-air occlusions) origin. The mixed gas and shrinkage nature of porosity makes it difficult to identify and indicate the dominant source. The selected parameters of metallurgical quality of AlSi9Cu3 alloy before and after refining and the gravity castings samples (as DI - density index method), were tested and evaluated. This alloy was served to cast the test casting by HPDC method. The penetrating testing (PT) and metallographic study of both kinds of castings were realized. The application of the NF&S simulation system allowed virtually to indicate the porosity zones at risk of a particular type in gravity and high-pressure-die-castings. The comparing of these results with the experiment allowed to conclude about NF&S models validation. The validity of hypotheses concerning the mechanisms of formation and development of porosity in HPDC casting were also analyzed.
The impact of casting conditions on microstructure a and mechanical properties was described, especially for cast products from AlSi9Cu3 alloy. Particular attention was paid to the parameters of dendritic structure: DAS 1 and DAS 2. Selected mechanical properties (by static tension test) of test castings made using basic technologies of casting: GSC - gravity sand casting, GDC - gravity die-casting and HPDC - high-pressure die-casting, are presented for cast-on test bars and cast separately. Casts were made of the same alloy AlSi9Cu3. Fractures and the zone near the fracture (after static tension test) was subjected to VT - visual tests, PT - penetration tests and metallographic tests. The condition of porosity (fracture zone) was also assessed. The analysis of virtual results was performed using the NovaFlow & Solid system together with the database and they were compared to experimental tests. This way of validation was applied in order to assess the correlation between the local rate of cooling and the size of DAS for GSC, GDC and HPDC technologies. Finally, the correlation between the parameters of structure and mechanical properties with regard to the impact of porosity was signalized.