Applied sciences

Opto-Electronics Review


Opto-Electronics Review | 2015 | vol. 23 | No 4 |

Download PDF Download RIS Download Bibtex


This paper presents the implementation of a thinned fibre Bragg grating as a fuel adulteration sensor for volatile organic compounds. The proposed sensor can detect upto 10% adulteration of benzene, toluene and xylene: hydrocarbons precisely, whereas traditional methods can detect only upto 20% adulteration. The results obtained from the experiments are verified using Finite Difference Time Domain method. It is found that experimental results have very less deviation from simulation results. The proposed sensor provides us with the new possibility that may have commercial application, as well.

Go to article

Authors and Affiliations

S. Agarwal
Y.K. Prajapati
V. Mishra
Download PDF Download RIS Download Bibtex


Worldwide commercial interest in the production of cerium doped yttrium aluminium garnet (YAG:Ce) phosphors is reflected in the widespread use of white light emitting devices. Despite of the fact that YAG:Ce is considered a “cool phosphor” it is the most important in white LED technology. This article reviews the developed techniques for producing phosphors with superior photoluminescence efficiency, including solid-state reaction, sol-gel and (co)precipitation methods. Also, by co-doping with rare earth elements, a red/blue shift is reached in the spectrum. The characteristics of YAG:Ce phosphors are investigated because the properties of the phosphors are strongly influenced by the synthesis routes and the sintering temperature treatment. After the phase analysis, morphology and emission studies of the phosphors there may be seen the conditions when the transition from the amorphous phase to the crystalline phase appears, when luminescent properties are influenced by the crystalline form, purity, average size of the particles, co-doping and so on.

Go to article

Authors and Affiliations

V. Tucureanu
A. Matei
A.M. Avram
Download PDF Download RIS Download Bibtex


In this work studies on propagation properties of a microstructured polymer optical fibre infiltrated with a nematic liquid crystal are presented. Specifically, the influence of an infiltration method on the LC molecular alignment inside fibre air-channels and, thus, on light guidance is discussed. Switching between propagation mechanisms, namely the transition from modified total internal reflection (mTIR) to the photonic bandgap effect obtained by varying external temperature is also demonstrated.

Go to article

Authors and Affiliations

K.A. Rutkowska
K. Milenko
O. Chojnowska
R. Dąbrowski
T.R. Woliński
Download PDF Download RIS Download Bibtex


In this paper our results of investigation on a pump power combiner in a configuration of 7×1 are presented. The performed combiner, with pump power of 80–85% transmission level, was successfully applied in a thulium doped fibre laser. The performed all-fibre laser setup reached a total CW output power of 6.42 W, achieving the efficiency on a 32.1% level

Go to article

Authors and Affiliations

D. Stachowiak
P. Kaczmarek
K.M. Abramski
Download PDF Download RIS Download Bibtex


One of the key parameters determining detection properties of silicon PIN detector structures (p+-ν-n+ or n+-ν-p+) is minority carrier diffusion length in p-n junction regions p-n (p+-ν or n+-ν). The parameter concerned strongly depends on quality of the starting material and technological processes conducted and has a significant impact on detector parameters, in particular dark current intensity. Thus, the parameter must be determined in order to optimise the design and technology of detectors.

The paper presents a method for measuring the spatial distribution of effective carrier diffusion length in silicon detector structures, based on the measurement of photoelectric current of a non-polarised structure illuminated (spot diameter of 250 μm) with monochromatic radiation of two wavelengths λ1 = 500 nm (silicon penetration depth of around 0.9 μm) and λ2 = 900 nm (silicon penetration depth of around 33 μm). The value of diffusion length was determined by analysing the spatial distribution of optical carrier generation and values of photoelectric currents.

Go to article

Authors and Affiliations

T. Piotrowski
M. Węgrzecki
M. Stolarski
K. Gościński
T. Krajewski
Download PDF Download RIS Download Bibtex


The design and performance analysis of a 1310/1550-nm wavelength division demultiplexer with tapered geometry based on InP/InGaAsP multimode interference (MMI) coupler has been carried out. Wavelength response of demultiplexer of conventional MMI and tapered input and tapered output (tapered I/O) waveguides geometry of the MMI have been discussed. The demultiplexing function has been first performed by choosing a suitable refractive index of the guiding region and geometrical parameters such as the width and length of MMI structure have been achieved. Access width of tapered I/O waveguides have been adjusted to give a low insertion loss (IL) and high extinction ratio (ER) for the considered wavelengths of 1310 nm and 1550 nm. The total size of the demultiplexer has been significantly reduced over the existing MMI devices. Numerical simulations with finite difference beam propagation method are applied to design and optimize the operation of the proposed demultiplexer.

Go to article

Authors and Affiliations

D. Chack
V. Kumar
S.K. Raghuwanshi
Download PDF Download RIS Download Bibtex


We report on the status of long-wave infrared Auger suppressed HgCdTe multilayer structures grown on GaAs substrates designed for high operating temperature condition: 200-300 K exhibiting, detectivity -1011 cmHz1/2/W, time response within a –120 ps range at 230 K. Abnormal responsivity within the range of -30 A/W for electrical area 30×30 μm2 under reverse bias V = 150 mV is reported. Maximum extraction coefficient of -2.3 was estimated for analysed structures.

Go to article

Authors and Affiliations

P. Martyniuk
W. Gawron
D. Stępień
J. Pawluczyk
A. Kębłowski
P. Madejczyk
M. Kopytko
A. Koźniewski

Editorial office

Opto-Electronics Review - Editorial Board

L. R. JAROSZEWICZ, Military University of Technology, Warsaw, Poland

Deputy Editor-in Chief:
P. MARTYNIUK, Military University of Technology, Warsaw, Poland

Board of Co-editors:

Optical Design and Applications
V.O. ANGELSKY, Chernivtsi National University, Chernivtsi, Ukraine

Image Processing
M. JÓŹWIK, Warsaw University of Technology, Warsaw, Poland

T. ANTOSIEWICZ, Warsaw University, Warsaw, Poland

Modelling of Optoelectronic Devices. Semiconductor Lasers
M. DEMS, Łódź Technical University, Łódź, Poland

Optoelectronics Materials
D. DOROSZ, AGH University of Science and Technology, Cracow, Poland

Micro-Opto-Electro-Mechanical Systems
T.P. GOTSZALK, Wrocław University of Technology, Wrocław, Poland

Infrared Physics and Technology <
M. KOPYTKO, Military University of Technology, Warsaw, Poland

Technology and Fabrication of Optoelectronic Devices
J. MUSZALSKI, Institute of Electron Technology, Warsaw, Poland

Photonic Crystals
K. PANAJOTOV, Vrije Universiteit Brussels, Brussels, Belgium

Laser Physics, Technology and Applications
J. ŚWIDERSKI, Warsaw University of Technology, Warsaw, Poland

Optical Sensors and Applications
M. ŚMIETANA, Warsaw University of Technology, Warsaw, Poland

A. IWAN, Military Institute of Engineer Technology, Wroclaw, Poland

Biomedical Optics and Photonics
A. LIEBERT, Institute of Biocybernetics and Biomedical Engineering, Warsaw, Poland

International Editorial Advisory Board

D. BIMBERG, Technische Universitaet Berlin, Berlin, Germany

F. CAPASSO, Harvard University, Cambridge, USA

A.I. DIROCHKA, Production Center ORION, Moscow, Russia

P.G. ELISEEV, University of New Mexico, Albuquerque, USA

P. HARING−BOLIVAR, University of Siegen, Siegen, Germany

M. HENINI, University of Nottingham, Nottingham, England

B. JASKORZYNSKA, Royal Institute of Technology, Kista, Sweden

M. KIMATA, Ritsumeikan University, Shiga, Japan

R. KLETTE, University of Auckland, Auckland, New Zealand

S. KRISHNA, University of New Mexico, Albuquerque, USA

H.C. LIU, Shanghai Jiao Tong University, Shanghai, China

J. MISIEWICZ, Wrocław University of Technology, Wrocław, Poland

E. OZBAY, Bilkent University, Ankara, Turkey

J.G. PELLEGRINI, Night Vision and Electronic Sensors Directorate, Fort Belvoir, USA

M. RAZEGHI, Northwestern University, Evanston, USA

A. ROGALSKI, Military University of Technology, Warsaw, Poland

P. RUSSELL, Max Planck Institute for the Science of Light, Erlangen, Germany

V. RYZHII, University of Aizu, Aizu, Japan

C. SIBILIA, Universita' di Roma “La Sapienza”, Roma, Italy

A. TORRICELLI, Politecnico di Milano, Milano, Italy

T. WOLIŃSKI, Warsaw University of Technology, Warsaw, Poland

W. WOLIŃSKI, Warsaw University of Technology, Warsaw, Poland

S.−T. WU, University of Central Florida, Orlando, USA

Y.P. YAKOVLEV, Ioffe Physicotechnical Institute, St. Petersburg, Russia

J. ZIELŃSKI, Military University of Technology, Warsaw, Poland

Language Editor

J. Kulesza, e-mail:

Technical Editors:

R.Podraza, e-mail:

E.Sadowska, e-mail:


Military University of Technology,

Gen. Sylwestra Kaliskiego St. 2,

00 – 908 Warsaw, Poland

Instructions for authors

Open Access policy

Opto-Electronics Review is an open access journal with all content available with no charge for readers in full text version. The journal content is available under the licencse CC BY-SA 4.0

Additional information

Opto-Electronics Review was established in 1992 for the publication of scientific papers concerning optoelectronics and photonics materials, system and signal processing. This journal covers the whole field of theory, experimental verification, techniques and instrumentation and brings together, within one journal, contributions from a wide range of disciplines. Papers covering novel topics extending the frontiers in optoelectronics and photonics are very encourage. The main goal of this magazine is promotion of papers presented by European scientific teams, especially those submitted by important team from Central and Eastern Europe. However, contributions from other parts of the world are by no means excluded.

Articles are published in OPELRE in the following categories:

-invited reviews presenting the current state of the knowledge,

-specialized topics at the forefront of optoelectronics and photonics and their applications,

-refereed research contributions reporting on original scientific or technological achievements,

-conference papers printed in normal issues as invited or contributed papers.

Authors of review papers are encouraged to write articles of relevance to a wide readership including both those established in this field of research and non-specialists working in related areas. Papers considered as “letters” are not published in OPELRE.

Opto-Electronics Review is published quarterly as a journal of the Association of Polish Electrical Engineers (SEP) and Polish Academy of Sciences (PAS) in cooperation with the Military University of Technology and under the auspices of the Polish Optoelectronics Committee of SEP.

Abstracting and Indexing:

Current Contents - Physical, Chemical & Earth Sciences

Current Contents - Engineering, Technology & Applied Sciences

Science Citation Index Expanded

Journal Citation Reports - Science Edition



Policies and ethics:

The editors of the journal place particular emphasis on compliance with the following principles:

Authorship of the paper: Authorship should be limited to those who have made a significant contribution to the conception, design, execution, or interpretation of the reported study.

Originality and plagiarism: The authors should ensure that they have written entirely original works, and if the authors have used the work and/or words of others, that this has been appropriately cited or quoted.

Data access and retention: Authors may be asked to provide the raw data in connection with a paper for editorial review, and should be prepared to provide public access to such data.

Multiple, redundant or concurrent publication: An author should not in general publish manuscripts describing essentially the same research in more than one journal or primary publication.

Acknowledgement of sources: Proper acknowledgment of the work of others must always be given.

Disclosure and conflicts of interest: All submissions must include disclosure of all relationships that could be viewed as presenting a potential conflict of interest.

Fundamental errors in published works: When an author discovers a significant error or inaccuracy in his/her own published work, it is the author's obligation to promptly notify the journal editor or publisher and cooperate with the editor to retract or correct the paper.

Reporting standards: Authors of reports of original research should present an accurate account of the work performed as well as an objective discussion of its significance.

Hazards and human or animal subjects: Statements of compliance are required if the work involves chemicals, procedures or equipment that have any unusual hazards inherent in their use, or if it involves the use of animal or human subjects.

Use of patient images or case details: Studies on patients or volunteers require ethics committee approval and informed consent, which should be documented in the paper.

This page uses 'cookies'. Learn more