Applied sciences

Opto-Electronics Review

Content

Opto-Electronics Review | 2015 | vol. 23 | No 3

Download PDF Download RIS Download Bibtex

Abstract

A high performance distributed sensor system with multi-intrusions simultaneous detection capability based on phase sensitive OTDR (Φ−OTDR) has been proposed and demonstrated. To improve system performance, three aspects have been investigated. Firstly, a model of one−dimensional impulse response of backscattered light and a Monte Carlo method have been used to study how the laser line width affects the system performance. Theoretical and experimental results show that the performances of the system, especially the signal−noise−ratio (SNR), decrease with the broadening of laser linewidth. Secondly, a temperature−compensated fibre Bragg grating with a 3 dB linewidth of 0.05 nm and a wavelength stability of 0.1 pm has been applied as an optical filter for effective denoising. Thirdly, a novel interrogation method for multi−intrusions simultaneous detection is proposed and applied in data denoising and processing. Consequently, benefiting from the three−in−one improvement, a high performance Φ−OTDR has been realized and four simultaneous applied intrusions have been detected and located at the same time along a 14 km sensing fibre with a spatial resolution of 6 m and a high SNR of 16 dB. To the best of our knowledge, this is the most multifunctional Φ−OTDR up to now and it can be used for perimeter and/or pipeline intrusion real−time monitoring.

Go to article

Authors and Affiliations

Y. Zhan
Q. Yu
K. Wang
F. Yang
Y. Kong
X. Zhao
Download PDF Download RIS Download Bibtex

Abstract

We report on the photoresponse dependence on the terahertz radiation intensity in ALGaN/GaN HEMTs. We show that the ALGaN/GaN HEMT can be used as a THz detector in CW and in pulsed regime up to radiation intensity of several kW/cm2. The dynamic range in the pulsed regime of detection can be more than 2 decades. We observed that the photoresponse of the HEMT could have a compound composition if two independent parts of the transistor are involved in the detection process; this result indicates that a more simple one channel device may be preferable on the detection purpose.

Go to article

Authors and Affiliations

N. Dyakonova
D.B. But
D. Coquillat
W. Knap
C. Drexler
P. Olbrich
J. Karch
M. Schafberger
S.D. Ganichev
G. Ducournau
C. Gaquiere
M.A. Poisson
S. Delage
G. Cywinski
C. Skierbiszewski
Download PDF Download RIS Download Bibtex

Abstract

Studies of background donor concentration (BDC) in HgCdTe samples grown with different types of technology were performed with the use of ion milling as a means of eliminating the compensating acceptors. In bulk crystals, films grown with liquid phase epitaxy and films fabricated with molecular beam epitaxy (MBE) on Si substrates, BDC of the order of ~1014 cm-3 was revealed. Films grown with metal−organic chemical vapour deposition and with MBE on GaAs substrates showed BDC of the order of ~1015 cm-3. A possibility of assessing the BDC in acceptor (arsenic)−doped HgCdTe was demon− strated. In general, the studies showed the effectiveness of ion milling as a method of reducing electrical compensation in n−type MCT and as an excellent tool for assisting evaluation of BDC.

Go to article

Authors and Affiliations

I.I. Izhnin
K.D. Mynbaev
A.V. Voitsekhovsky
A.G. Korotaev
O.I. Fitsych
M. Pociask-Bialy
S.A. Dvoretsky
Download PDF Download RIS Download Bibtex

Abstract

Novel FTIR spectrometer for the monitoring of atmosphere is presented. Its design stands out by a compact form allowing the measures in two IR spectral bands 3-5 and 8-12 μm simultaneously. The spectrometer is composed of two Michelson interferometers with the joint sliding mirror. The paper contains the detailed description of the optics and electronics units, preliminary results of the measurement of biological aerosols and calibration methods.

Go to article

Authors and Affiliations

L. Wawrzyniuk
R. Jóźwicki
G. Szymański
M. Rataj
M. Błęcka
A. Cichocki
R. Pietrzak
Download PDF Download RIS Download Bibtex

Abstract

The present article investigates theoretically the refection and transmission through a lossless dielectric slab embedded between two semi−infinite left−handed materials (LHMs) in which the electric permittivity and magnetic permeability are simultaneously negative. The LHM is assumed to be dispersive according to Lorentz as well as Drude medium model. The reflection and transmission coefficients are studied with the angle of incidence, frequency and slab thickness. The effect of the damping frequency is also investigated. It is found that the damping frequency has an insignificant effect on reflected, transmitted and loss powers. Band pass filter is one of the possible applications of the proposed structure.

Go to article

Authors and Affiliations

S.A. Taya
D.M. El-Amassi
Download PDF Download RIS Download Bibtex

Abstract

A variety of optoelectronic devices (rangefinders, velocity meters, terrestrial scanners, lidars, free space optics communication systems and others) based on semiconductor laser technology feature low−quality and highly asymmetric beams. It results from optical characteristics of the applied high−peak−power pulsed laser sources, which in most cases are composed of several laser chips, each containing one or a few active lasers. Such sources cannot be considered as coherent, so the resultant beam is formed by the superposition of many optically uncorrelated sub-sources. Far−field distribution of laser spots in such devices corresponds to the shape of laser emitting area, which instead of desired symmetry shows layout composed of one or several discrete lines or rectangles. In some applications, especially if small targets are concerned, it may be crucial to provide more symmetrical and uniform laser beam cross−section. In the paper, the novel strategy of such correction, combining coherent and incoherent approaches, is presented. All aspects of technological implementations are discussed covering general theoretical treatment of the problem, diffractive optical element (DOE) design in the form of computer generated hologram (CGH), its fabrication and testing in case of selected laser module beam correction.

Go to article

Authors and Affiliations

J. Wojtanowski
M. Traczyk
Z. Mierczyk
M. Zygmunt
B. Przybyszewski

Instructions for authors

Guide for Authors

https://www.editorialsystem.com/opelre/journal/for_authors/

OPTO-ELECTRONICS REVIEW is an open access journal. This involves the payment of an article publishing charge (APC) by the authors, their institution or funding body. We make the article freely available immediately upon publication on PAS Jornals platform (https://journals.pan.pl/opelre)

As of July 1st, 2024, there are changes in the fees for open access publications in Opto-Electronics Review: 2000 PLN (500 EUR) - up to 8 pages of the journal format and mandatory over-length charges of 200 PLN (50 EUR) per page (see the above link with instructions for Authors for details)

Articles submitted by June 30th, 2024: existing fee: 1750 PLN (or 400 EUR)

Articles submitted from July 1st, 2024: new fee: 2000 PLN (or 500 EUR) - a flat fee per paper up to 8 pages of the journal format (each additional page will be charged an additional 200 PLN or 50 EUR).

Additional info

Opto-Electronics Review was established in 1992 for the publication of scientific papers concerning optoelectronics and photonics materials, system and signal processing. This journal covers the whole field of theory, experimental verification, techniques and instrumentation and brings together, within one journal, contributions from a wide range of disciplines. Papers covering novel topics extending the frontiers in optoelectronics and photonics are very encouraged. The main goal of this magazine is promotion of papers presented by European scientific teams, especially those submitted by important team from Central and Eastern Europe. However, contributions from other parts of the world are by no means excluded.

Articles are published in OPELRE in the following categories:

-invited reviews presenting the current state of the knowledge,

-specialized topics at the forefront of optoelectronics and photonics and their applications,

-refereed research contributions reporting on original scientific or technological achievements,

-conference papers printed in normal issues as invited or contributed papers.

Authors of review papers are encouraged to write articles of relevance to a wide readership including both those established in this field of research and non-specialists working in related areas. Papers considered as “letters” are not published in OPELRE.

Opto-Electronics Review is published quarterly as a journal of the Association of Polish Electrical Engineers (SEP) and Polish Academy of Sciences (PAS) in cooperation with the Military University of Technology and under the auspices of the Polish Optoelectronics Committee of SEP.

Abstracting and Indexing:

Arianta

BazTech

EBSCO relevant databases

EBSCO Discovery Service

SCOPUS relevant databases

ProQuest relevant databases

Clarivate Analytics relevant databases

WangFang

additionally:

ProQuesta (Ex Libris, Ulrich, Summon)

Google Scholar

Policies and ethics:

The editors of the journal place particular emphasis on compliance with the following principles:

Ethical policy of Opto-Electronics Review

The ethical policy of Opto-Electronics Review follows the European Code of Conduct for Research Integrity and is also guided by the core practices and policies outlined by the Committee on Publication Ethics (COPE).

Authors must be honest in presenting their results and conclusions of their research. Research misconduct is harmful for knowledge.

Research results

Fabrication, falsification, or selective reporting of data with the intent to mislead or deceive is unethical, as is the theft of data or research results from others. The results of research should be recorded and maintained to allow for analysis and review. Following publication, the data should be retained for a reasonable period and made available upon request. Exceptions may be appropriate in certain circumstances to preserve privacy, to assure patent protection, or for similar reasons.

Authorship

All those who have made a significant contribution should be given chance to be cited as authors. Other individuals who have contributed to the work should be acknowledged. Articles should include a full list of the current institutional affiliations of all authors, both academic and corporate.

Competing interests

All authors, referees and editors must declare any conflicting or competing interests relating to a given article. Competing interests through their potential influence on behavior or content or perception may undermine the objectivity, integrity, or perceived value of publication.

Peer Review

We are committed to prompt evaluation and publication of fully accepted papers in Opto-Electronics Review’s publications. To maintain a high-quality publication, all submissions undergo a rigorous review process.

Characteristics of the peer review process are as follows:

• Simultaneous submissions of the same manuscript to different journals will not be tolerated.

• Manuscripts with contents outside the scope will not be considered for review.

• Opto-Electronics Review is a single-blind review journal.

• Papers will be refereed by at least 2 experts as suggested by the editorial board.

• In addition, Editors will have the option of seeking additional reviews when needed. Authors will be informed when Editors decide further review is required.

• All publication decisions are made by the journal’s Editor-in-Chief based on the referees’ reports. Authors of papers that are not accepted are notified promptly.

• All submitted manuscripts are treated as confidential documents. We expect reviewers to treat manuscripts as confidential material.

• Editors and reviewers involved in the review process should disclose conflicts of interest resulting from direct competitive, collaborative, or other relationships with any of the authors, and remove oneself from cases in which such conflicts preclude an objective evaluation. Privileged information or ideas that are obtained through peer review must not be used for competitive gain.

• A reviewer should be alert to potential ethical issues in the paper and should bring these to the attention of the editor, including any substantial similarity or overlap between the manuscript under consideration and any other published paper of which the reviewer has personal knowledge. Any statement, observation, derivation, or argument that had been previously reported should be accompanied by the relevant citation.

• Personal criticism is inappropriate.

Plagiarism

Reproducing text from other papers without properly crediting the source (plagiarism) or producing many papers with almost the same content by the same authors (self-plagiarism) is not acceptable. Submitting the same results to more than one journal concurrently is unethical. Exceptions are the review articles. Authors may not present results obtained by others as if they were their own. Authors should acknowledge the work of others used in their research and cite publications that have influenced the direction and course of their study.

Plagiarism is not tolerated. All manuscripts submitted to Opto-Electronics Review will be checked for plagiarism (copying text or results from other sources) and self-plagiarism (duplicating substantial parts of authors’ own published work without giving the appropriate references) using the CrossCheck database (iThenticate plagiarism checker).

Duplicate submission

Simultaneous submissions of the same manuscript to different journals will not be tolerated. The submitted article will be removed without consideration.

Corrections and retractions

All authors have an obligation to inform and cooperate with journal editors to provide prompt retractions or correction of errors in published works.

• The journal will issue retractions if:

• There is clear evidence that the findings are unreliable, either as a result of misconduct (e.g., data fabrication or honest error - miscalculation or experimental error);

• The findings have previously been published elsewhere without proper cross-referencing, permission or justification (i.e., cases of redundant publication);

• It constitutes plagiarism;

• It reports unethical research.

• The journal will issue errata, if:

• A small portion of an otherwise reliable publication proves to be misleading (especially because of honest error);

• The author list is incorrect.

Other forms of misconduct include failure to meet clear ethical and legal requirements such as misrepresentation of interests, breach of confidentiality, lack of informed consent and abuse of research subjects or materials. Misconduct also includes improper dealing with infringements, such as attempts to cover up misconduct and reprisals on whistleblowers.

The primary responsibility for handling research misconduct is in the hands of those who employ the researchers. If a possible misconduct is brought to our attention, we will seek advice from the referees and the Editorial Board. If there is the evidence, we will resolve the matter by appropriate corrections in the printed and online journal; by refusing to consider an author's future work and by contacting affected authors and editors of other journals.

Human and Animal Rights

If the work involves the use of human subjects, the author should ensure that the work described has been carried out in accordance with The Code of Ethics of the World Medical Association (Declaration of Helsinki) for experiments involving humans; Uniform Requirements for manuscripts submitted to Biomedical journals. Authors should include a statement in the manuscript that informed consent was obtained for experimentation with human subjects. The privacy rights of human subjects must always be observed.

All animal experiments should comply with the ARRIVE guidelines and should be carried out in accordance with the EU Directive 2010/63/EU for animal experiments, and the authors should clearly indicate in the manuscript that such guidelines have been followed.

This page uses 'cookies'. Learn more