Search results

Filters

  • Journals
  • Authors
  • Keywords
  • Date
  • Type

Search results

Number of results: 1
items per page: 25 50 75
Sort by:
Download PDF Download RIS Download Bibtex

Abstract

The article presents results of research on the influence of the mould material on selected mechanical properties of wax models used for production of casting in investment casting method. The main goal was to compare the strength and hardness of samples produced in various media in order to analyse the applicability of the 3D printing technology as an alternative method of producing wax injection dies. To make the wax injection dies, it was decided to use a milled steel and 3D printed inserts made using FDM (Fused Deposition Modeling) / FFF (Fused Filament Fabrication) technology from HIPS (High Impact Polystyrene) and ABS (Acrylonitrile Butadiene Styrene). A semi-automatic vertical reciprocating injection moulding machine was used to produce the wax samples made of Freeman Flakes Wax Mixture – Super Pink. During injection moulding process, the mould temperature was measured each time before and after moulding with a pyrometer. Then, the samples were subjected to a static tensile test and a hardness test. It was shown that the mould material influences the strength properties of the wax samples, but not their final hardness.
Go to article

Bibliography

[1] Campbell, J. (2015). Complete casting handbook: metal casting processes, techniques and design. (2nd ed.). Oxford: Butterworth-Heinemann.
[2] Tamta, K. & Karunakar, D.B. (2020). Development of hybrid pattern material for investment casting process: an experimental investigation on improvement in pattern characteristics. Materials and Manufacturing Processes. 36(6), 744-751. DOI: 10.1080/10426914.2020.1854471.
[3] Bernat, L. & Popielarski, P. (2020). Identification of substitute thermophysical properties of gypsum mould. Archives of Foundry Engineering. 20(1), 5-8. DOI: 10.24425/afe.2020.131274.
[4] Guzera, J. (2010). Casting production in autoclaved gypsum moulds using investment casting method. Archives of Foundry Engineering. 10(3), 307-310. (in Polish).
[5] Sarbojeet, J. (2016). Crystallization behavior of waxes. Doctoral dissertation. Utah State University, Logan, United States of America.
[6] Unknown author, Investment casting process steps (lost wax). Retrieved January 12, 2021, from http://americancastingco.com/investment-casting-process.
[7] Ruwoldt, J., Humborstad Sørland, G., Simon, S., Oschmann, H-J. & Sjoblom, J. (2019). Inhibitor-wax interactions and PPD effect on wax crystallization: New approaches for GC/MS and NMR, and comparison with DSC, CPM, and rheometry. Journal of Petroleum Science and Engineering. 177. 53-68. DOI: 10.1016/j.petrol.2019.02.046
[8] Jung, T., Kim, J-N. & Kang, S-P. (2016). Influence of polymeric additives on paraffin waxes crystallization in model oils. Korean Journal of Chemical Engineering. 33(6), 1813-1822. DOI: https:://doi.org/10.1007/s11814-016-0052-3.
[9] Simnofske, D. & Mollenhauer, K. (2017). Effect of wax crystallization on complex modulus of modified bitumen after varied temperature conditioning rates. IOP Conference Series: Materials Science and Engineering. 236. DOI: 10.1088/1757-899X/236/1/012003.
[10] Edwards, R.T. (1957). Crystal Habit of Paraffin Wax. Industrial & Engineering Chemistry. 49(4), 750-757. DOI: https://doi.org/10.1021/ie50568a042.
[11] Dantas Neto A.A., Gomes, E.A.S. & Barros Neto, E.L., Dantas, T.N.C. & Moura C.P.A.M. (2009). Determination of wax appearance temperature (WAT) in paraffin/solvent systems by photoelectric signal and viscosimetry. Brazilian Journal of Petroleum and Gas. 3(4), 149-157. ISSN: 1982- 0593.
[12] Unknown author, Freeman super pink flake wax: technical data sheet. Retrieved January 12, 2021, from https://www.freemanwax.com/datasheets/Injection/tdssuperpink.pdf.
[13] Unknown author, M-series-specification. Retrieved January 12, 2021, from https://support.zortrax.com/m-seriesspecification/.
[14] Clarke, E.W. (1951). Crystal Types of Pure Hydrocarbons in the Paraffin Wax Range. Industrial & Engineering Chemistry. 43(11), 2526–2535. DOI: https://doi.org/10.1021/ie50503a037
Go to article

Authors and Affiliations

A. Kroma
1
P. Brzęk
1

  1. Poznan University of Technology, Institute of Materials Technology, Division of Foundry, Piotrowo 3, 61-138 Poznań, Poland

This page uses 'cookies'. Learn more