The paper aims to answer the following questions: What are the trends in streetscape design? And how can streetscape become more resilient to climate change in the coming years? Although the research questions of exploratory nature also challenge theoretical claims, this is a hypothetical study, designed to foster a discussion about the visions of the future streetscape and new technology for an urban sidewalk. It covers a description and a cross-case comparison of an experimental product – the Climate Tile, implemented in Denmark in 2018, and a theoretical solution – the Sponge Pavement – a model system based on the structural soil foundation and permeable surface, evolved as an idea in 2018 in Poland. The cases are examples of innovations selected to describe a new type of water-permeable surfaces matching the urban context. Both solutions share common features: they are in that there is no need to place heavy equipment on the project site; they match the urban context of a dense city, being smooth, resistant and easy to clean. The comparison of the Climate Tile and the Sponge Pavement allowed determining the optimal application for the given solution. It also proved the trend towards the rainwater management-oriented direction of the development of the streetscape of the future. The study results could contribute to the discussion of the streetscape of the future. We would like to focus on the idea of the Sponge Pavement for further development in laboratory tests and as the pilot project.
Power loss mechanisms in small area monolithic-interconnected photovoltaic modules (MIM) are described and evaluated. Optical and electrical losses are quantified and individual loss components are derived for loss mechanisms of small area radial (radius = 1 mm) pie-shaped six-segment GaAs MIM laser power converter. At low monochromatic homogeneous illumination (Glow = 1.8 W/cm2, λ0 = 809 nm) conversion efficiency of the cell, designed for a low irradiance, is reduced by 3.7%abs. due to isolation trench optical losses and by 7.0%abs. due to electrical losses (mainly perimeter recombination). Electrical losses in a device designed for a high irradiance, result in 18%abs. decrease of output power under homogeneous monochromatic illumination (Ghigh = 83.1 W/cm2, λ0 = 809 nm), while 11.6%abs. losses are attributed to optical reasons. Regardless the irradiance level, optical losses further increase if the device is illuminated with a Gaussian instead of an ideal flattop beam profile. In this case, beam spillage losses occur and losses due to isolation trenches and reflections from metallization are elevated. On top of that, additional current mismatch losses occur, if individual MIM’s segments are not equally illuminated. For the studied device, a 29 μm off center misalignment of a Gaussian shaped beam (with 1% spillage) reduces the short circuit current Isc by 10%abs. due to the current mismatch between segments.