Along the paper the new method called Invertebrate Bankfull Assessment method (IBA method) of determination of bankfull discharge is presented. The investigation of bankfull discharge using IBA were performed within one Polish Carpathian stream in the mountain region: the Ochotnica Stream. As an index of bankfull the existence of certain species of invertebrates was used which are present and resistant to specific water discharge conditions. The borders within a cross section of the mountain stream with a gravel bed were defined where characteristic invertebrates are present which are recognized as bankfull borders. Finally three invertebrates benches (IB-ms) were recognized which are characterized by very specific invertebrate species. Bankfull discharge was calculated up to this IB-ms and corelated using Canonical Correspondence Analysis with other values of bankfull calculated for a cross section using different bankfull.

This article discusses the traffic types typically used in industrial networks. The authors propose a number of methods of generating traffic that can be used in modeling traffic sources in the networks under consideration. The proposed traffic model have been developed on the basis of the ON/OFF model. The proposed solutions can be applied to model typical traffic types that are used in industrial systems, such as Time-Triggered (TT) traffic, Audio-Video Bridging (AVB) traffic or Best Effort traffic. The article discusses four traffic models with modifications and shows how the proposed models can be used in modeling different traffic types used in industrial networks.

As part of the studies conducted in the field of broadly understood casting of non-ferrous metals, selected results on the impact of variable additions of copper and silicon in aluminium were presented. A series of melts was carried out with copper content kept constant at a level of 2% (1st stage) and 4% (2nd stage) and variable contents of silicon introduced into aluminium. The crystallization characteristics of the examined alloys and the percentage of structural constituents at ambient temperature were obtained by modelling the thermodynamic parameters of individual phases with the CALPHAD method. The microstructure of the obtained alloys was examined and microhardness was measured by the Vickers-Hanemann method. The alloy properties were assessed based on the results of mechanical tests, including ultimate tensile strength (UTS), hardness (BHN) and elongation (E). The machinability of the tested alloys was analyzed in a machinability test carried out by the Keep-Bauer method, which consisted in drilling with a constant feed force.

The obtained results clearly indicate changes in the images of microstructure, such as the reduction in grain size, solution hardening and precipitation hardening. The changes in the microstructure are also reflected in the results of mechanical properties testing, causing an increase in strength and hardness, and plasticity variations in the range of 4 ÷ 16%, mainly due to the introduced additions of copper and silicon. The process of alloy strengthening is also visible in the results of machinability tests. The plotted curves showing the depth of the hole as a function of time and the images of chips produced during the test indicate an improvement in the wear resistance obtained for the tested group of aluminium alloys with the additions of copper and silicon.

Fly ashes from the combustion of lignite coal are suitable materials for the creation of suspensions in which CO2 is bound by mineral carbonation. Considering their limited economic uses, mineral sequestration, as a stage of the CCS technology in lignite coal power plants, can be a way of recycling them. Mineral sequestration of CO2 was researched using fly ashes from the combustion of lignite coal in the Pątnów power plant, distinguished by a high content of CaO and free CaO. Research into phase composition confirmed the process of carbonation of the whole calcium hydroxide contained in pure suspensions. The degree of CO2 binding was determined on the basis of thermogravimetric analysis. A rise in the content of CaCO3 was found in the suspensions after subjecting them to the effects of carbon dioxide. Following carbonation the pH is lowered. A reduction in the leaching of all pollutants was discovered in the studied ashes. The results obtained were compared to earlier research of ashes from the same power plant but with a different chemical composition. Research confirmed that water suspensions of ashes from the combustion of lignite coal in the Pątnów power plant are distinguished for a high degree of carbonation.