Search results

Filters

  • Journals
  • Authors
  • Keywords
  • Date
  • Type

Search results

Number of results: 1
items per page: 25 50 75
Sort by:
Download PDF Download RIS Download Bibtex

Abstract

Hybrid nanofluids is obtained by dispersing more than one nanoparticle into a base fluid. The work is concerned with a detailed numerical investigation of the thermal efficiency and hydraulic performance of hybrid nanofluids for circular jet impinges on a round plate. For this paper, a metal (Ag), a metal oxides (Al2O3) and a metal carbides (SiC) nanoparticle and their water based hybrid nanofluids are considered to analyse numerically with varying significant dimensionless parameters, i.e., the jet-to-plate spacing ratio, Reynolds number and volume fraction of nanoparticles. The results demonstrated that the efficiency of heat transfer of all nanofluids is increased by the addition of nanoparticle to the dispersed in water at constant Reynolds number. Moreover, the results illustrate that heat transfer efficacy and pumping power penalty both increased as jet-to-plate spacing ratio reduced. The jet-to-plate spacing ratio equal to 4 is the best as the percentage enhance heat transfer is maximum in this situation. Since both the heat transfer effect and pumping penalty increase using hybrid nanofluids, thermal performance factor increases or decreases depends on nanoparticles of nanofluids. It is evident that the analysis of these hybrid nanofluids will consider both the increase in heat efficiency and the pumping capacity. The best flow behaviour is achieved for SiC–Al2O3 hybrid nanofluids. New merit number is introduced for additional clarification.
Go to article

Bibliography

[1] Sun B., Zhang Y., Yang D., Li H.: Experimental study on heat transfer characteristics of hybrid nanofluid impinging jets. Appl. Therm. Eng. 151(2019), 556–566
[2] Vafaei M., Afrand M., Sina N., Kalbasi R., Sourani F., Teimouri H.: Evaluation of thermal conductivity of MgO-MWCNTs/EG hybrid nanofluids based on experimental data by selecting optimal artificial neural networks. Physica E (Lowdim. Sys. Nanostruct.) 85(2017), 90–96.
[3] Kumar D.D., Arasu A.V.: A comprehensive review of preparation, characterization, properties and stability of hybrid nanofluids. Renew. Sustain. Energy Rev. 81(2017), 2, 1669–1689.
[4] Minea A.A.: Challenges in hybrid nanofluids behavior in turbulent flow: recent research and numerical comparison. Renew Sustain. Energy Rev. 71(2016), 426–434.
[5] Sidik N.A.C., Adamu I.M., Jamil M.M., Kefayati G.H.R., Mamat R., Najafi G.: Recent progress on hybrid nanofluids in heat transfer applications: a comprehensive review. Int. Commun. Heat Mass 78(2016), 68–79.
[6] Nabil M.F., Azmi W.H., Hamid K.A., Zawawi N.N.M., Priyandoko G., Mamat R.: Thermo-physical properties of hybrid nanofluids and hybrid nanolubricants: a comprehensive review on performance. Int. Commun. Heat Mass 83(2017), 30–39.
[7] Hamzah M.H., Sidik N.A.C, Ken T.L., Mamat R., Najafi G.: Factors affecting the performance of hybrid nanofluids: a comprehensive review. Int. J. Heat Mass Tran. 115(2017), 12, 630–46.
[8] Khodadadi H., Aghakhani S., Majd H., Kalbasi R., Wongwises S., Afrand M.: A comprehensive review on rheological behavior of mono and hybrid nanofluids: effective parameters and predictive correlations. Int. J. Heat Mass Tran. 127(2018), B, 997–1012.
[9] Kumar D.D., Arasu A.V.: A comprehensive review of preparation, characterization, properties and stability of hybrid nanofluids. Renew. Sust. Energ. Rev. 81(2018), 1669–89.
[10] Sidik N.A.C., Jamil M.M., Japar W.M., Adamu I.M.: A review on preparation methods, stability and applications of hybrid nanofluids. Renew. Sust. Energ. Rev. 80 (2017), 1112–1122.
[11] Madhesh D., Kalaiselvam S.: Experimental analysis of hybrid nanofluid as a coolant. Procedia Eng. 97(2014), 1667–1675.
[12] Suresh S., Venkitaraj K.P, Selvakumar P., Chandrasekar M.: Synthesis of Al2O3—Cu/water hybrid nanofluids using two step method and its thermophysical properties. Colloids Surface A Physicochem. Eng. Asp. 388(2011), 41–48.
[13] Jana S., Khojin A.S.,.Zhong W.H: Enhancement of fluid thermal conductivity by the addition of single and hybrid nano-additives. Thermochim. Acta 462(2007), 1–2, 45–55.
[14] Abbasi S.M., Nemati A., Rashidi A., Arzani K.: The effect of functionalization method on the stability and the thermal conductivity of nanofluid hybrids of carbon nanotubes/gamma alumina. Ceram. Int. 39(2013), 3885–3891.
[15] Nine M.J., Munkhbayar B., Rahman M.S., Chung H., Jeong H.: Highly productive synthesis process of well dispersed Cu2O and Cu/Cu2O nanoparticles and its thermal characterization. Mater. Chem. Phys. 141(2013), 636–642.
[16] Chen L.F., Cheng M., Yang D.J., Yang L.: Enhanced thermal conductivity of nanofluid by synergistic effect of multi-walled carbon nanotubes and Fe2O3 nanoparticles. Appl. Mech. Mater. 548–549(2014), 118–123.
[17] Sundar L.S., Singh M.K., Sousa A.C.M.: Enhanced heat transfer and friction factor of MWCNT–Fe3O4/water hybrid nanofluids. Int. Commun. Heat Mass 52(2014), 73–83.
[18] Baby T.T., Ramaprabhu S.: Surfactant free magnetic nanofluids based on coreshell type nanoparticle decorated multiwalled carbon nanotubes. J Appl. Phys. 110(2011), 064325–31.
[19] Esfe M.H., Abbasian A.A., Rezaie M., Yan W.M., Karimipour A.: Experimental determination of thermal conductivity and dynamic viscosity of Ag–MgO/water hybrid nanofluid. Int. Commun. Heat Mass 66(2015), 189–195.
[20] Das P.K.: A review based on the effect and mechanism of thermal conductivity of normal nanofluids and hybrid nanofluids. J. Mol. Liq. 240(2017), 420–446.
[21] Soltani S., Kasaeian A., Sarrafha H. et al.: An experimental investigation of a hybrid photovoltaic/thermoelectric system with nanofluid application. Sol. Energy 155(2017) 1033–1043.
[22] Leong K.Y., Ahmad K.Z., Ong H.C., Ghazali M.J., Baharum A.: Synthesis and thermal conductivity characteristic of hybrid nanofluids — A review. Renew. Sust. Energ. Rev. 75(2017), 868–878.
[23] Nimmagadda R., Venkatasubbaiah K.: Conjugate heat transfer analysis of microchannel using novel hybrid nanofluids (Al2O3 + Ag/Water). Eur. J. Mech. B. Fluids 52 (2015), 19–27.
[24] Sajid M.U., Ali H.M.: Thermal conductivity of hybrid nanofluids: a critical review. Int. J. Heat Mass Tran. 26 (2018), 211–234.
[25] Allahyar H.R., Hormozi F., Zarenezhad B.: Experimental investigation on the thermal performance of a coiled heat exchanger using a new hybrid nanofluid. Exp. Therm. Fluid Sci. 76 (2016), 324–329.
[26] Olatomide G.F., Adebimpe A.A., Ayodeji O.S., David O.O., Johnson A.O., Francis I.I., Fatai A.B.: Numerical investigation and sensitivity analysis of turbulent heat transfer and pressure drop ofAl2O3/H2O nanofluid in straight pipe using response surface methodology. Arch. Thermodyn. 41(2020), 1, 3–30
[27] Sarkar J., Ghosh P., Adil A.: A review on hybrid nanofluids: recent research, development and applications. Renew. Sust. Energ. Rev. 43 (2015), 164–177.
[28] Moghadassi A., Ghomi E., Parvizian F.: A numerical study of water based Al2O3 and Al2O3–Cu hybrid nanofluid effect on forced convective heat transfer. Int. J. Therm. Sci. 92 (2015), 50–57.
[29] Esfe M.H., Rostamian S.H., Alirezaie A.: An applicable study on the thermal conductivity of SWCNT-MgO hybrid nanofluid and price-performance analysis for energy management. Appl. Therm. Eng. 111(2016), 1202–1210.
[30] Suresh S., Venkitaraj K.P., Selvakumar P. et al.: Effect of Al2O3–Cu/water hybrid nanofluid in heat transfer. Exp. Therm. Fluid Sci. 38 (2012), 54–60.
[31] Esfe M.H., Esfandeh S., Saedodin S. et al.: Experimental evaluation, sensitivity analyzation and ANN modeling of thermal conductivity of ZnO-MWCNT/EG-water hybrid nanofluid for engineering applications. Appl. Therm. Eng. 125 (2017), 673– 685.
[32] Munkhbayar B., Tanshen M.R., Jeoun J. et al.: Surfactant-free dispersion of silver nanoparticles into MWCNT-aqueous nanofluids prepared by one-step technique and their thermal characteristics. Ceram. Int. 39 (2013), 6, 6415–6425.
[33] Minea A.A.: Pumping power and heat transfer efficiency evaluation on Al2O3, TiO2 and SiO2 single and hybrid water-based nanofluids for energy application. J. Therm. Anal. Calorim. 139 (2020), 2, 1171–1181.
[34] Manninen M., Veikko T., Sirpa K.: On the mixture model for multiphase flow. VTT, Espoo 1996, 3–67.
[35] Schiller L., Naumann Z.: A Drag Coefficient Correlation. Zeitschrift des Vereins Deutscher Ingenieure 77 (1935), 318–320.
[36] Sagot B., Antonini G., Christgen A., Buron F.: Jet impingement heat transfer on a flat plate at a constant wall temperature. Int. J. Therm. Sci. 47 (2008), 12, 1610– 1619.
[37] Menter F.R.: Two-equation eddy-viscosity turbulence models for engineering applications. AIAA J. 32(1994), 8, 1598–1605.
[38] Krieger I.M.,. Dougherty T.J.: A mechanism for non-Newtonian flow in suspension of 528 rigid spheres. J. Trans. Soc. Rheol. 3(1956), 37–152
[39] Maxwell J.C.: A Treastise on Electricity and Magnetism (2nd Edn.). Oxford Univer. Press, Cambridge 1881.
[40] ANSYS Inc. ANSYS Fluent 15.0 UDF Manual, Canonsburg, PA: ANSYS Inc, 2013.
[41] Gherasim I., Roy G., Nguyen, C.T., Vo-Ngoc, D.: Heat transfer enhancement and pumping power in confined radial flows using nanoparticle suspensions (nanofluids). Int. J. Therm. Sci. 50(2011), 3, 369–377.
[42] Maradiya C., Vadher J., Agarwal R.: The heat transfer enhancement techniques and their Thermal Performance Factor. Beni-Suef Uni. J. Basic Appl. Sci. 7(2018), 1, 1–21.
Go to article

Authors and Affiliations

Abanti Datta
1
Pabitra Halder
1

  1. Indian Institute of Engineering Science and Technology, Shibpur PO: Botanic Garden, Howrah-711103, West Bengal, India

This page uses 'cookies'. Learn more